Petroleum and natural gas industries - Characteristics of LNG, influencing the design, and material selection (ISO 16903:2015)

ISO 16903:2015 gives guidance on the characteristics of liquefied natural gas (LNG) and the cryogenic materials used in the LNG industry. It also gives guidance on health and safety matters. It is intended to act as a reference document for the implementation of other standards in the liquefied natural gas field. It is intended as a reference for use by persons who design or operate LNG facilities.

Erdöl- und Erdgasindustrie - Eigenschaften von Flüssigerdgas mit Einfluss auf die Auslegung und die Materialauswahl (ISO 16903:2015)

Diese Internationale Norm informiert über die Eigenschaften von Flüssigerdgas (LNG) und in der LNG-Industrie verwendeten tieftemperaturfesten Werkstoffe. Außerdem enthält sie Leitlinien zu Fragen von Gesundheit und Sicherheit. Sie soll für weitere Normen auf dem Gebiet Flüssigerdgas als Bezugsnorm dienen. Sie dient als Referenz für Personen, die LNG-Anlagen auslegen oder betreiben.

Pétrole et industries du gaz naturel - Caractéristiques du GNL influant sur la conception et le choix des matériaux (ISO 16903:2015)

L'ISO 16903:2015 donne des indications sur les caractéristiques du gaz naturel liquéfié (GNL) et sur les matériaux cryogéniques utilisés dans l'industrie du GNL. Elle donne également des indications sur la santé et la sécurité. Elle est destinée à servir de document de référence pour la mise en ?uvre des autres normes dans le domaine du gaz naturel liquéfié. Elle est destinée à servir de document de référence pour les personnes qui conçoivent ou exploitent des installations de GNL.

Industrija nafte in zemeljskega plina - Vpliv lastnosti utekočinjenega zemeljskega plina na načrtovanje in izbor materialov (ISO 16903:2015)

Ta evropski standard vsebuje smernice glede značilnosti utekočinjenega zemeljskega plina (LNG) in kriogenih materialov, ki se uporabljajo v industriji LNG. Podaja tudi smernice glede zdravstvenih in varnostnih zadev. Namenjen je uporabi kot referenčni dokument pri izvajanju drugih standardov CEN/TC 282 "Napeljave in oprema za utekočinjeni zemeljski plin". Namenjen je uporabi kot referenčni dokument za osebe, ki projektirajo ali upravljajo opremo LNG. (spremenjen bo v skladu s področjem uporabe standarda ISO 16903).

General Information

Status
Published
Publication Date
16-Jun-2015
Withdrawal Date
30-Dec-2015
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
17-Jun-2015
Completion Date
17-Jun-2015

Relations

Buy Standard

Standard
EN ISO 16903:2015
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16903:2015
01-september-2015
1DGRPHãþD
SIST EN 1160:1998
,QGXVWULMDQDIWHLQ]HPHOMVNHJDSOLQD9SOLYODVWQRVWLXWHNRþLQMHQHJD]HPHOMVNHJD
SOLQDQDQDþUWRYDQMHLQL]ERUPDWHULDORY ,62
Petroleum and natural gas industries - Characteristics of LNG, influencing the design,
and material selection (ISO 16903:2015)
Erdöl- und Erdgasindustrie - Eigenschaften von Flüssigerdgas mit Einfluss auf die
Auslegung und die Materialauswahl (ISO 16903:2015)
Pétrole et industries du gaz naturel - Caractéristiques du GNL influant sur la conception
et le choix des matériaux (ISO 16903:2015)
Ta slovenski standard je istoveten z: EN ISO 16903:2015
ICS:
75.060 Zemeljski plin Natural gas
75.180.01 Oprema za industrijo nafte in Equipment for petroleum and
zemeljskega plina na splošno natural gas industries in
general
SIST EN ISO 16903:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16903:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 16903:2015

EUROPEAN STANDARD
EN ISO 16903

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2015
ICS 75.180.01 Supersedes EN 1160:1996
English Version
Petroleum and natural gas industries - Characteristics of LNG,
influencing the design, and material selection (ISO 16903:2015)
Pétrole et industries du gaz naturel - Caractéristiques du Erdöl- und Erdgasindustrie - Eigenschaften von
GNL influant sur la conception et le choix des matériaux Flüssigerdgas mit Einfluss auf die Auslegung und die
(ISO 16903:2015) Materialauswahl (ISO 16903:2015)
This European Standard was approved by CEN on 23 April 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16903:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16903:2015
EN ISO 16903:2015 (E)
Contents
Page
European foreword .3


2

---------------------- Page: 4 ----------------------

SIST EN ISO 16903:2015
EN ISO 16903:2015 (E)
European foreword
This document (EN ISO 16903:2015) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in collaboration
with Technical Committee CEN/TC 282 “Installation and equipment for LNG” the secretariat of which is held
by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2015, and conflicting national standards shall be withdrawn
at the latest by December 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1160:1996.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16903:2015 ha
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.