CEN/TR 14585-3:2017

Corrugated metal hose assemblies for pressure applications - Part 3: Design method

This Technical Report provides guidance on the design of corrugated metal hose assemblies for pressure applications, i.e. maximum allowable pressure PS greater than 0,5 bar. Allowable stresses are consistent with the requirements of the Pressure Equipment Directive 2014/68/EU.

Gewellte Metallschlauchleitungen für Druckanwendungen - Teil 3: Auslegungsverfahren

Tuyauteries métalliques flexibles onduleuses pour applications sous pression - Partie 3: Méthode de conception

Le présent Rapport Technique fournit des lignes directrices pour la conception de tuyauteries métalliques flexibles onduleuses pour applications sous pression, c'est-à-dire la pression maximale admissible PS supérieure à 0,5 bar. Les contraintes admissibles sont cohérentes avec les exigences de la Directive 2014/68/UE «Équipements sous pression».

Valoviti kovinski cevni sestavi v tlačnih cevovodih - 3. del: Metode načrtovanja

To tehnično poročilo podaja smernice za načrtovanje valovitih kovinskih cevnih sestavov v tlačnih cevovodih, pri katerih je največji dovoljeni tlak PS večji od 0,5 bara. Dopustne obremenitve so v skladu z zahtevami direktive o tlačni opremi 2014/68/EU.

General Information

• Status: Published
• Publication Date: 24-Oct-2017
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 342 - Metal hoses, hose assemblies, bellows and expansion joints
• Drafting Committee: CEN/TC 342/WG 1 - Hose assemblies and fittings
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 25-Oct-2017
• Due Date: 13-Oct-2018
• Completion Date: 25-Oct-2017
• Ref Project: SIST-TP CEN/TR 14585-3:2018 - Corrugated metal hose assemblies for pressure applications - Part 3: Design methods

Relations

• Revised: FprEN 14585:2024 - Corrugated metal hose assemblies for pressure applications
• Effective Date: 22-Aug-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 14585-3:2018
01-februar-2018
9DORYLWLNRYLQVNLFHYQLVHVWDYLYWODþQLKFHYRYRGLKGHO0HWRGHQDþUWRYDQMD
Corrugated metal hose assemblies for pressure applications - Part 3: Design methods
Gewellte Metallschlauchleitungen für Druckanwendungen - Teil 3: Auslegungsverfahren
Tuyauteries métalliques flexibles onduleuses pour applications sous pression - Partie 3:
Méthode de conception
Ta slovenski standard je istoveten z: CEN/TR 14585-3:2017
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
SIST-TP CEN/TR 14585-3:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 14585-3:2018

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 14585-3:2018


CEN/TR 14585-3
TECHNICAL REPORT

RAPPORT TECHNIQUE

October 2017
TECHNISCHER BERICHT
ICS 23.040.70
English Version

Corrugated metal hose assemblies for pressure
applications - Part 3: Design method
Tuyauteries métalliques flexibles onduleuses pour Gewellte Metallschlauchleitungen für
applications sous pression - Partie 3: Méthode de Druckanwendungen - Teil 3: Auslegungsverfahren
conception


This Technical Report was approved by CEN on 25 September 2017. It has been drawn up by the Technical Committee CEN/TC
342.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 14585-3:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 14585-3:2018
CEN/TR 14585-3:2017 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Symbols and abbreviations . 7
5 Materials . 10
5.1 General requirements . 10
5.2 Suitable materials . 10
5.3 Other materials . 13
5.4 Corrosion . 13
5.5 Low temperature application . 13
5.6 Material documentation . 15
6 Design methods . 15
6.1 General . 15
6.2 Basic design criteria . 16
6.2.1 Design conditions .
...