Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2019)

This document specifies requirements for Bourdon-tube pressure gauges normally used with compressed gas systems at pressures up to 30 MPa (300 bar) in welding, cutting and allied processes. It also covers use for dissolved acetylene and for liquefied gases under pressure.
It does not cover gauges for acetylene in acetylene-manufacturing plants.

Gasschweißgeräte - Manometer für Schweißen, Schneiden und verwandte Prozesse (ISO 5171:2019)

Dieses Dokument legt Anforderungen für Rohrfeder Manometer fest, die üblicherweise für Schweißen, Schneiden und verwandte Prozesse mit Druckgassystemen bei Drücken bis zu 30 MPa (300 bar) eingesetzt werden. Es gilt auch beim Einsatz für gelöstes Acetylen und für unter Druck stehende Flüssiggase.
Es gilt nicht für Acetylen Manometer in Acetylenwerken.

Matériel de soudage au gaz - Manomètres utilisés pour le soudage, le coupage et les techniques connexes (ISO 5171:2019)

Le présent document spécifie des exigences pour des manomètres à tube de Bourdon utilisés habituellement en soudage, coupage et techniques connexes, pour les installations de gaz comprimés jusqu'à des pressions de 30 MPa (300 bar). Il traite également de l'acétylène dissous et des gaz liquéfiés sous pression.
Il ne traite pas des manomètres pour acétylène utilisés dans les usines de production d'acétylène.

Oprema za plamensko varjenje - Manometri za varjenje, rezanje in sorodne tehnike (ISO 5171:2019)

Ta dokument določa zahteve za manometre z Bourdonovo cevjo, ki se običajno uporabljajo s sistemi za stisnjene pline s tlakom do 30 MPa (300 barov) pri varjenju, rezanju in sorodnih tehnikah. Zajema tudi uporabo za raztopljeni acetilen in utekočinjene pline pod tlakom.
Ne zajema manometrov za acetilen v obratih za proizvodnjo acetilena.

General Information

Status
Published
Publication Date
28-May-2019
Withdrawal Date
29-Nov-2019
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
29-May-2019
Completion Date
29-May-2019

Relations

Buy Standard

Standard
EN ISO 5171:2019
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5171:2019
01-oktober-2019
Nadomešča:
SIST EN ISO 5171:2011
Oprema za plamensko varjenje - Manometri za varjenje, rezanje in sorodne tehnike
(ISO 5171:2019)
Gas welding equipment - Pressure gauges used in welding, cutting and allied processes
(ISO 5171:2019)
Gasschweißgeräte - Manometer für Schweißen, Schneiden und verwandte Prozesse
(ISO 5171:2019)
Matériel de soudage au gaz - Manomètres utilisés pour le soudage, le coupage et les
techniques connexes (ISO 5171:2019)
Ta slovenski standard je istoveten z: EN ISO 5171:2019
ICS:
17.100 Merjenje sile, teže in tlaka Measurement of force,
weight and pressure
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 5171:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 5171:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 5171:2019


EN ISO 5171
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2019
EUROPÄISCHE NORM
ICS 25.160.30 Supersedes EN ISO 5171:2010
English Version

Gas welding equipment - Pressure gauges used in welding,
cutting and allied processes (ISO 5171:2019)
Matériel de soudage au gaz - Manomètres utilisés pour Gasschweißgeräte - Manometer für Schweißen,
le soudage, le coupage et les techniques connexes (ISO Schneiden und verwandte Prozesse (ISO 5171:2019)
5171:2019)
This European Standard was approved by CEN on 5 May 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5171:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 5171:2019
EN ISO 5171:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 5171:2019
EN ISO 5171:2019 (E)
European foreword
This document (EN ISO 5171:2019) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2019, and conflicting national standards
shall be withdrawn at the latest by November 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 5171:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 5171:2019 has been approved by CEN as EN ISO 5171:2019 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 5171:2019

---------------------- Page: 6 ----------------------
SIST EN ISO 5171:2019
INTERNATIONAL ISO
STANDARD 5171
Fourth edition
2019-05
Gas welding equipment — Pressure
gauges used
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.