EN 1621-1:2012

Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods

This European Standard specifies requirements and test methods for limb joint impact protectors incorporated or intended to be incorporated into motorcycle riders' clothing or used as separate items.

Motorradfahrer-Schutzkleidung gegen mechanische Belastung - Teil 1: Gelenkprotektoren für Motorradfahrer - Anforderungen und Prüfverfahren

Diese Europäische Norm legt Anforderungen und Prüfverfahren für Gelenkprotektoren fest, die als eigen-ständige Ausrüstungsteile genutzt werden oder zur Verwendung in die Motorradfahrerkleidung eingearbeitet sind oder dafür vorgesehen sind.

Vêtements de protection contre les chocs mécaniques pour motocyclistes - Partie 1: Exigences et méthodes d'essai des protecteurs - Exigences et méthodes d'essai

La présente Norme européenne spécifie les exigences et les méthodes d'essai pour les protecteurs contre les chocs sur les articulations incorporés ou destinés à être incorporés dans des vêtements pour motocyclistes ou utilisés comme articles séparés.

Varovalne obleke za zaščito motoristov pred mehanskimi vplivi - 1. del: Ščitniki sklepov za motoriste - Zahteve in preskusne metode

Ta evropski standard določa zahteve in preskusne metode za ščitnike sklepov, ki so vgrajeni v varovalno obleko za zaščito motoristov ali namenjeni vgradnji v zadevno obleko ali se uporabljajo ločeno.

General Information

• Status: Published
• Publication Date: 18-Dec-2012
• Withdrawal Date: 29-Jun-2013
• ICS: 13.340.10 - Protective clothing
• ICS: 43.140 - Motorcycles and mopeds
• Technical Committee: CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
• Drafting Committee: CEN/TC 162/WG 9 - Motorcycle rider protective clothing
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 04-Jun-2018
• Completion Date: 04-Jun-2018
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: SIST EN 1621-1:2013 - Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods

Relations

• Replaces: EN 1621-1:1997 - Motorcyclists' protective clothing against mechanical impact - Part 1: Requirements and test methods for impact protectors
• Effective Date: 26-Dec-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Motorradfahrer-Schutzkleidung gegen mechanische Belastung - Teil 1: Gelenkprotektoren für Motorradfahrer - Anforderungen und PrüfverfahrenMotorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methodsMotorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods43.140Motorna kolesa in mopediMotor cycles and mopeds13.340.10Varovalna oblekaProtective clothingICS:Ta slovenski standard je istoveten z:EN 1621-1:2012SIST EN 1621-1:2013en,fr,de01-marec-2013SIST EN 1621-1:2013SLOVENSKI
STANDARDSIST EN 1621-1:19981DGRPHãþD



SIST EN 1621-1:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1621-1
December 2012 ICS 13.340.10 Supersedes EN 1621-1:1997English Version
Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods
Vêtements de protection contre les chocs mécaniques pour motocyclistes - Exigences et méthodes d'essai des protecteurs - Partie 1: Exigences et méthodes d'essai
Motorradfahrer-Schutzkleidung gegen mechanische Belastung - Teil 1: Gelenkprotektoren für Motorradfahrer - Anforderungen und Prüfverfahren This European Standard was approved by CEN on 27 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1621-1:2012: ESIST EN 1621-1:2013



EN 1621-1:2012 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Zones of protection and protectors.6 5 Requirements .6 5.1 General .6 5.2 Innocuousness .6 5.3 Minimum dimensions of zone of protection .6 5.4 Impact attenuation .7 5.5 Ergonomic requirements .8 6 Test methods and equipment .8 6.1 General .
...