Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters

IEC 61800-9-2:2017 specifies energy efficiency indicators of power electronics (complete drive modules, CDM), power drive systems (PDS) and motor starters, all used for motor driven equipment. It specifies the methodology for the determination of losses of the complete drive module (CDM), the power drive system (PDS) and the motor system. It defines IE and IES-classes, their limit values and provides test procedures for the classification of the overall losses of the motor system. Furthermore, this document proposes a methodology for the implementation of the best energy efficiency solution of drive systems. This depends on the architecture of the motor driven system, on the speed/load profile and on the operating points over time of the driven equipment.

Drehzahlveränderbare elektrische Antriebe - Teil 9-2: Ökodesign für Antriebssysteme, Motorstarter, Leistungselektronik und deren angetriebene Einrichtungen - Indikatoren für die Energieeffizienz von Antriebssystemen und Motorstartern

Entraînements électriques de puissance à vitesse variable - Partie 9-2: Ecoconception des entraînements électriques de puissance, des démarreurs de moteurs, de l'électronique de puissance et de leurs applications entraînées - Indicateurs d'efficacité énergétique pour les entraînements électriques de puissance et les démarreurs de moteurs

L'IEC 61800-9-2:2017 spécifie les indicateurs d'efficacité énergétique pour l'électronique de puissance (modules d'entraînement complets, CDM), les entraînements électriques de puissance (PDS) et les démarreurs de moteurs, utilisés avec les équipements entraînés par moteur. Elle spécifie la méthodologie de détermination des pertes du module d'entraînement complet (CDM), de l'entraînement électrique de puissance (PDS) et du système moteur. Elle définit les classes IE et IES et établit leurs valeurs limites, ainsi que les procédures d'essai pour le classement des pertes globales du système moteur. Le présent document propose également une méthodologie pour la mise en œuvre de la meilleure solution écoénergétique des entraînements électriques. Cela dépend de l'architecture du système entraîné par moteur, du profil vitesse/charge et des points de fonctionnement dans le temps de l’équipement entraîné.

Električni pogonski sistemi z nastavljivo hitrostjo - 9-2. del: Okoljsko primerno načrtovanje motornih pogonskih sistemov, motornih zaganjalnikov, močnostne elektronike in njihove naprave, ki jih ti poganjajo - Kazalniki energijske učinkovitosti pogonskih sistemov in motornih zaganjalnikov (IEC 61800-9-2:2017)

Standard IEC 61800-9-2:2017 določa kazalnike energetske učinkovitosti močnostne elektronike (celoviti pogonski moduli, CDM), pogonskih sistemov (PDS) in motornih zaganjalnikov, ki se uporabljajo za opremo na motorni pogon. Določa metodologijo za določanje izgub celovitega pogonskega modula (CDM), pogonskega sistema (PDS) in motornega sistema.
Opredeljuje razrede IE in IES in njihove mejne vrednosti ter navaja preskusne postopke za klasifikacijo skupne izgube motornih sistemov.
Poleg tega ta dokument predlaga metodologijo za uvedbo najboljše rešitve za energijsko učinkovitost pogonskih sistemov.
To je odvisno od arhitekture sistema na motorni pogon, hitrostnega/nalagalnega profila in delovnih točk pogonske opreme.

General Information

Status
Published
Publication Date
15-Jun-2017
Withdrawal Date
06-Apr-2020
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
16-Jun-2017
Completion Date
16-Jun-2017

Relations

Buy Standard

Standard
EN 61800-9-2:2017 - BARVE
English language
112 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61800-9-2:2017
01-december-2017
1DGRPHãþD
SIST EN 50598-2:2015
SIST EN 50598-2:2015/A1:2016
(OHNWULþQLSRJRQVNLVLVWHPL]QDVWDYOMLYRKLWURVWMRGHO2NROMVNRSULPHUQR
QDþUWRYDQMHPRWRUQLKSRJRQVNLKVLVWHPRYPRWRUQLK]DJDQMDOQLNRYPRþQRVWQH
HOHNWURQLNHLQQMLKRYHQDSUDYHNLMLKWLSRJDQMDMR.D]DOQLNLHQHUJLMVNH
XþLQNRYLWRVWLSRJRQVNLKVLVWHPRYLQPRWRUQLK]DJDQMDOQLNRY ,(&
Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive
systems, motor starters, power electronics & their driven applications - Energy efficiency
indicators for power drive systems and motor starters (IEC 61800-9-2:2017)
Drehzahlveränderbare elektrische Antriebe - Teil 9-2: Ökodesign für Antriebssysteme,
Motorstarter, Leistungselektronik und deren angetriebene Einrichtungen - Indikatoren für
die Energieeffizienz von Antriebssystemen und Motorstartern (IEC 61800-9-2:2017)
Ta slovenski standard je istoveten z: EN 61800-9-2:2017
ICS:
27.015 (QHUJLMVNDXþLQNRYLWRVW Energy efficiency. Energy
2KUDQMDQMHHQHUJLMHQD conservation in general
VSORãQR
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
SIST EN 61800-9-2:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61800-9-2:2017

---------------------- Page: 2 ----------------------

SIST EN 61800-9-2:2017


EUROPEAN STANDARD EN 61800-9-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2017
ICS 29.130.01; 29.160.30; 29.200 Supersedes EN 50598-2:2014
English Version
Adjustable speed electrical power drive systems -
Part 9-2: Ecodesign for power drive systems, motor starters,
power electronics and their driven applications - Energy
efficiency indicators for power drive systems and motor starters
(IEC 61800-9-2:2017)
Entraînements électriques de puissance à vitesse variable - Drehzahlveränderbare elektrische Antriebe -
Partie 9-2: Ecoconception des entraînements électriques de Teil 9-2: Ökodesign für Antriebssysteme, Motorstarter,
puissance, des démarreurs de moteurs, de l'électronique de Leistungselektronik und deren angetriebene Einrichtungen -
puissance et de leurs applications entraînées - Indicateurs Indikatoren für die Energieeffizienz von Antriebssystemen
d'efficacité énergétique pour les entraînements électriques und Motorstartern
de puissance et les démarreurs de moteurs (IEC 61800-9-2:2017)
(IEC 61800-9-2:2017)
This European Standard was approved by CENELEC on 2017-04-07. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61800-9-2:2017 E

---------------------- Page: 3 ----------------------

SIST EN 61800-9-2:2017
EN 61800-9-2:2017
European foreword
The text of document 22G/349/FDIS, future edition 1 of IEC 61800-9-2, prepared by SC 22G
"Adjustable speed electric drive systems incorporating semiconductor power converters", of IEC/TC 22
"Power electronic systems and equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 61800-9-2:2017.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2018-01-07
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2020-04-07
the document have to be withdrawn

This document supersedes EN 50598-2:2014.
Attention is drawn to the possibility t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.