Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS

IEC 62321-4:2013 describes the use of four test methods for mercury in polymers, metals and electronics, namely CV-AAS (cold vapour atomic absorption spectrometry), CV-AFS (cold vapour atomic fluorescence spectrometry) ICP-OES (inductively coupled plasma optical emission spectrometry), and ICP-MS (inductively coupled plasma mass spectrometry) as well as several procedures for preparing the sample solution from which the most appropriate method of analysis can be selected by experts.

Verfahren zur Bestimmung von bestimmten Substanzen in Produkten der Elektrotechnik - Teil 4: Quecksilber in Polymeren, Metallen und Elektronik mit CV-AAS, CV-AFS, ICP-OES und ICP-MS

Détermination de certaines substances dans les produits électrotechniques - Partie 4: Mercure dans les polymères, métaux et produits électroniques par CV-AAS, CV-AFS, ICP-OES et ICP-MS

La CEI 62321-4:2013 décrit l'utilisation de quatre méthodes d'essai pour le mercure dans les polymères, à savoir CV-AAS (spectrométrie d'absorption atomique à vapeur froide), CV-AFS (spectrométrie de fluorescence atomique à vapeur froide, cold vapour atomic fluorescence spectrometry), ICP-OES (spectrométrie d'émission optique couplée à un plasma induit) et ICP-MS (spectrométrie de masse couplée à un plasma induit), ainsi que plusieurs procédures de préparation de la solution d'échantillon à partir de laquelle les experts peuvent choisir la méthode d'analyse la plus appropriée.

Določevanje posameznih snovi v elektrotehničnih izdelkih - 4. del: Določevanje živega srebra v polimerih, kovinah in elektroniki s CV-AAS, CV-AFS, ICP-OES in ICP-MS (IEC 62321-4:2013)

Standard 62321-4 opisuje preskusne metode za določanje živega srebra v polimerih, kovinah in elektroniki z metodami: atomska absorpcijska spektrometrija hladnih par (CV-AAS), atomska fluorescentna spektrometrija hladnih par (CV-AFS), optična emisijska spektrometrija z induktivno sklopljeno plazmo (ICP-OES) in masna spektrometrija z induktivno sklopljeno plazmo (ICP-MS). Ta standard opisuje določanje vsebnosti živega srebra (Hg) v elektrotehničnih izdelkih. Ti materiali so polimeri, kovine in elektronika (npr. plošče s tiskanim vezjem, hladnokatodne fluorescentne luči, živosrebrova stikala). Z baterijami, ki vsebujejo Hg, je treba ravnati, kot je opisano v [1]1. Medlaboratorijska študija je ocenila le te preskusne metode za plastiko. Druge matrice niso zajete. Ta standard se nanaša na vzorec kot predmet, ki se obdela in meri. Kaj ta vzorec je ali kako ga pridobiti, določa subjekt, ki izvaja preskuse. Dodatna navodila o pridobivanju reprezentativnih vzorcev iz končnih elektronskih izdelkov za testiranje ravni reguliranih snovi je mogoče najti v standardu IEC 62321-2. Opozoriti je treba, da lahko izbira in/ali določanje vzorca vpliva na razlago rezultatov preskusa. Ta standard opisuje uporabo štirih metod, in sicer CV-AAS (atomska absorpcijska spektrometrija hladnih par), CV-AFS (atomska fluorescentna spektrometrija hladnih par), ICP-OES (optična emisijska spektrometrija z induktivno sklopljeno plazmo) in ICP-MS (masna spektrometrija z induktivno sklopljeno plazmo), kot tudi več postopkov za pripravo vzorčne raztopine, s pomočjo katere lahko strokovnjaki izberejo najbolj primerno metodo analize. Analiza z metodami CV-AAS, CV-AFS, ICP-OES in ICP-MS omogoča določitev ciljnega elementa živega srebra z visoko natančnostjo (negotovost v nizkoodstotnem območju) in/ali visoko občutljivostjo (do ravni μg/kg). Testni postopki, opisani v tem standardu, so namenjeni zagotavljanju najvišje stopnje pravilnosti in natančnosti za vsebnosti živega srebra v območju od 4 mg/kg do 1000 mg/kg. Postopki se lahko uporabljajo tudi za višje koncentracije. Za neposredno analizo se lahko uporabi tudi toplotna razgradnja-amalgamiranje zlata v povezavi s CV-AAS (TD(G)-AAS) za analizo živega srebra brez prebave vzorca, čeprav so meje zaznavanja višje kot pri drugih postopkih zaradi zmanjšane velikosti vzorca.

General Information

Status
Published
Publication Date
24-Apr-2014
Withdrawal Date
14-Nov-2016
Current Stage
6060 - Document made available - Publishing
Start Date
25-Apr-2014
Completion Date
25-Apr-2014

Relations

Buy Standard

Standard
EN 62321-4:2014
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62321-4:2014
01-junij-2014
1DGRPHãþD
SIST EN 62321:2009
'RORþHYDQMHSRVDPH]QLKVQRYLYHOHNWURWHKQLþQLKL]GHONLKGHO'RORþHYDQMH
åLYHJDVUHEUDYSROLPHULKNRYLQDKLQHOHNWURQLNLV&9$$6&9$)6,&32(6LQ
,&306 ,(&
Determination of certain substances in electrotechnical products - Part 4: Determination
of mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-
MS
Verfahren zur Bestimmung von bestimmten Substanzen in Produkten der Elektrotechnik
- Teil 4: Bestimmung von Quecksilber in Polymeren, Metallen und Elektronik mit CV-
AAS, CV-AFS, ICP-OES und ICP-MS
Détermination de certaines substances dans les produits électrotechniques - Partie 4:
Détermination du mercure dans les polymères, métaux et produits électroniques part CV
-AAS, CV-AFS, ICP-OES et ICP-MS
Ta slovenski standard je istoveten z: EN 62321-4:2014
ICS:
29.020 Elektrotehnika na splošno Electrical engineering in
general
31.020 Elektronske komponente na Electronic components in
splošno general
SIST EN 62321-4:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62321-4:2014

---------------------- Page: 2 ----------------------

SIST EN 62321-4:2014

EUROPEAN STANDARD
EN 62321-4

NORME EUROPÉENNE
April 2014
EUROPÄISCHE NORM


ICS 13.020; 43.040.10 Supersedes EN 62321:2009 (partially)


English version


Determination of certain substances in electrotechnical products -
Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS,
ICP-OES and ICP-MS
(IEC 62321-4:2013)


Détermination de certaines substances Verfahren zur Bestimmung von
dans les produits électrotechniques - bestimmten Substanzen in Produkten der
Partie 4: Mercure dans les polymères, Elektrotechnik -
métaux et produits électroniques par CV- Teil 4: Quecksilber in Polymeren, Metallen
AAS, CV-AFS, ICP-OES et ICP-MS und Elektronik mit CV-AAS, CV-AFS, ICP-
(CEI 62321-4:2013) OES und ICP-MS
(IEC 62321-4:2013)



This European Standard was approved by CENELEC on 2013-11-15. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62321-4:2014 E

---------------------- Page: 3 ----------------------

SIST EN 62321-4:2014
EN 62321-4:2014 - 2 -

Foreword
The text of document 111/299/FDIS, future edition 1 of IEC 62321-4, prepared by IEC/TC 111
"Environmental standardization for electrical and electronic products and systems" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62321-4:2014.
The following dates are fixed:
(dop) 2014-10-25
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-11-15
• latest date by which the national
standards conflicting with the

document have to be withdrawn

EN 62321-4:2014 is a partial replacement of EN 62321:2009, forming a structural revision and replacing
Clause 7 and Annex E.

Future parts in the EN 62321 series will gradually replace the corresponding clauses in EN 62321:2009.
Until such time as all parts are published, however, EN 62321:2009 remains valid for those clauses not
yet re-published as a separate part.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
End
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.