EN IEC 62442-2:2018
(Main)Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
NEW!IEC 62442-2:2018 is available as IEC 62442-2:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62442-2:2018 defines a measurement method of the power losses of electromagnetic controlgear, the total input power and the standby power of electronic controlgear for high intensity discharged lamps (excluding fluorescent lamps). A calculation method of the efficiency of controlgear for high intensity discharged lamp(s) is also defined. It is assumed that the controlgear are designed for use on DC supplies up to 1 000 V and/or AC supplies up to 1 000 V at 50 Hz or 60 Hz. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision and has been harmonized with IEC 62442-1 and IEC 62442-3.
Energieeffizienz von Lampenbetriebsgeräten - Teil 2: Betriebsgeräte für Hochdruck-Entladungslampen (ausgenommen Leuchtstofflampen) - Messverfahren zur Bestimmung des Wirkungsgrades von Betriebsgeräten
Performance énergétique des appareillages de lampes - Partie 2: Appareillages des lampes à décharge à haute intensité (à l’exclusion des lampes à fluorescence) - Méthode de mesure pour la détermination du rendement des appareillages
NEW!IEC 62442-2:2018 est disponible sous forme de IEC 62442-2:2018 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62442-2:2018 définit une méthode de mesure des pertes de puissance de l’appareillage électromagnétique, de la puissance d’entrée totale et de la puissance de veille de l’appareillage électronique pour les lampes à décharge à haute intensité (à l’exclusion des lampes à fluorescence). Une méthode de calcul du rendement des appareillages de lampe(s) à décharge à haute intensité est également définie. On considère que les appareillages sont conçus pour des alimentations en courant continu jusqu’à 1 000 V et/ou des alimentations en courant alternatif de 1 000 V au maximum, à 50 Hz ou 60 Hz. Cette deuxième édition annule et remplace la première édition parue en 2014. Cette édition constitue une révision technique. Cette édition constitue une révision technique et elle a été harmonisée avec l’IEC 62442-1 et l’IEC 62442-3.
Energijske lastnosti krmilne naprave sijalke - 2. del: Krmilna naprava za visoko intenzivnostne razelektritvene sijalke (razen fluorescenčne sijalke) - Merilna metoda za ugotavljanje učinkovitosti krmilne naprave (IEC 62442-2:2018)
Ta del standarda EN IEC 62442 določa metodo merjenja izgub moči elektromagnetnih krmilnih naprav, skupne vhodne moči in moči elektronskih krmilnih naprav v stanju pripravljenosti za visokointenzivnostne razelektritvene sijalke (razen fluorescenčnih sijalk). Določena je tudi metoda za izračun učinkovitosti elektronskih krmilnih naprav za visokointenzivnostne razelektritvene sijalke.
Predpostavlja se, da je krmilna oprema zasnovana za uporabo pri enosmernem napajanju z napetostjo 1000 V in/ali izmeničnem napajanju z napetostjo do 1000 V pri 50 Hz ali 60 Hz.
Ta dokument se uporablja za krmilna vezja, ki so sestavljena izključno iz elektronskih krmilnih naprav in sijalk.
OPOMBA: Zahteve za preskušanje posameznih delov krmilne opreme med proizvodnjo niso vključene.
Ta dokument določa merilno metodo za skupno vhodno moč, moč v stanju pripravljenosti in metodo za izračun učinkovitosti krmilnih naprav za sijalke za vse krmilne naprave, ki se prodajajo za domačo uporabo in običajne komercialne namene ter delujejo z visokointenzivnostnimi razelektritvenimi sijalkami.
Ta dokument se ne uporablja za:
– krmilno opremo, ki je sestavni del sijalk;
– krmilna vezja z zaporedno vezanimi kondenzatorji;
– krmiljeno elektromagnetno krmilno opremo.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62442-2:2018
01-november-2018
1DGRPHãþD
SIST EN 62442-2:2014
SIST EN 62442-2:2014/A11:2018
(QHUJLMVNHODVWQRVWLNUPLOQHQDSUDYHVLMDONHGHO .UPLOQDQDSUDYD]DYLVRNR
LQWHQ]LYQRVWQHUD]HOHNWULWYHQHVLMDONH UD]HQIOXRUHVFHQþQHVLMDONH 0HULOQD
PHWRGD]DXJRWDYOMDQMHXþLQNRYLWRVWLNUPLOQHQDSUDYH ,(&
Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge
lamps (excluding fluorescent lamps) - Method of measurement to determine the
efficiency of the controlgear (IEC 62442-2:2018)
Energieeffizienz von Lampenbetriebsgeräten - Teil 2: Betriebsgeräte für Hochdruck-
Entladungslampen (ausgenommen Leuchtstofflampen) - Messverfahren zur Bestimmung
des Wirkungsgrades von Betriebsgeräten (IEC 62442-2:2018)
Performance énergétique des appareillages de lampes - Partie 2: Appareillages des
lampes à décharge à haute intensité (à l’exclusion des lampes à fluorescence) -
Méthode de mesure pour la détermination du rendement des appareillages (IEC 62442-
2:2018)
Ta slovenski standard je istoveten z: EN IEC 62442-2:2018
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN IEC 62442-2:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62442-2:2018
---------------------- Page: 2 ----------------------
SIST EN IEC 62442-2:2018
EUROPEAN STANDARD EN IEC 62442-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2018
ICS 29.140.99
English Version
Energy performance of lamp controlgear - Part 2: Controlgear for
high intensity discharge lamps (excluding fluorescent lamps) -
Method of measurement to determine the efficiency of
controlgear
(IEC 62442-2:2018)
Performance énergétique des appareillages de lampes - Energieeffizienz von Lampenbetriebsgeräten - Teil 2:
Partie 2: Appareillages des lampes à décharge à haute Betriebsgeräte für Hochdruck-Entladungslampen
intensité (à l'exclusion des lampes à fluorescence) - (ausgenommen Leuchtstofflampen) - Messverfahren zur
Méthode de mesure pour la détermination du rendement Bestimmung des Wirkungsgrades von Betriebsgeräten
des appareillages (IEC 62442-2:2018)
(IEC 62442-2:2018)
This European Standard was approved by CENELEC on 2018-08-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62442-2:2018 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62442-2:2018
EN IEC 62442-2:2018 (E)
European foreword
The text of document 34C/1336A/CDV, future edition 2 of IEC 62442-2, prepared by SC 34C
"Auxiliaries for lamps" of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62442-2:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-05-10
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-08-10
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62442-2:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes ha
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.