EN 60286-1:2017

Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes

IEC 60286-1:2017(E) applies to the tape packaging of components with axial leads for use in electronic equipment. In general, the tape is applied to the component leads. It covers requirements for taping techniques used with equipment for the preforming of leads, automatic handling, insertion and other operations, and includes only those dimensions which are essential to the taping of components intended for the above-mentioned purposes. This edition includes the following significant changes with respect to the previous edition: a) a complete revision of the structure (detailed in Annex A) and reworked layout.

Gurtung und Magazinierung von Bauelementen für automatische Verarbeitung - Teil 1: Gurtung von Bauelementen mit axialen Anschlüssen

Emballage des composants pour opérations automatisées - Partie 1: Emballage des composants à sorties axiales en bandes continues

L'IEC 60286-1:2017 est applicable à la mise en bande des composants à sorties axiales utilisés dans les équipements électroniques. En général, la bande est appliquée aux sorties des composants. Elle contient des exigences relatives aux techniques de mise en bande applicables pour l'utilisation des équipements de préformage des sorties, de manutention, d'insertion automatique et d'autres opérations. Elle fournit uniquement les dimensions essentielles pour la mise en bande de composants destinés aux opérations mentionnées ci-dessus. La présente édition inclut les modifications majeures suivantes par rapport à l'édition précédente: a) révision complète de la structure (détaillée à l' REF _Ref482173886 \r \h \* MERGEFORMAT Annexe A 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000E0000005F005200650066003400380032003100370033003800380036000000 ) et remaniement de la mise en page.

Pakiranje komponent za avtomatsko ravnanje - 1. del: Trakanje komponent z osnimi izvodi/priključki na neprekinjenih trakovih (IEC 60286-1:2017)

Ta del standarda IEC 60286 se uporablja za trakanje komponent z osnimi izvodi/priključki za uporabo v elektronski opremi. V splošnem se trak nanese na priključke komponent.
Standard zajema zahteve za tehnike tračnega pakiranja, ki se uporabljajo z opremo za izvedbo priključkov, samodejno upravljanje, vstavljanje in druge operacije, ter vključuje samo tiste dimenzije, ki so bistvene za tračno pakiranje komponent, ki se uporabljajo za zgoraj omenjene namene.

General Information

• Status: Published
• Publication Date: 16-Nov-2017
• Withdrawal Date: 29-Aug-2020
• ICS: 31.020 - Electronic components in general
• ICS: 31.240 - Mechanical structures for electronic equipment
• ICS: 55.060 - Spools. Bobbins
• Technical Committee: CLC/SR 40 - Capacitors and resistors for electronic equipment
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 17-Nov-2017
• Completion Date: 17-Nov-2017
• Ref Project: SIST EN 60286-1:2018 - Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (IEC 60286-1:2017)

Relations

• Replaces: EN 60286-1:1998 - Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes
• Effective Date: 21-Nov-2017
• Amended By: EN 60286-1:2017/A1:2021 - Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes
• Effective Date: 24-Mar-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60286-1:2018
01-januar-2018
1DGRPHãþD
SIST EN 60286-1:2002
3DNLUDQMHNRPSRQHQW]DDYWRPDWVNRUDYQDQMHGHO7UDNDQMHNRPSRQHQW]
RVQLPLL]YRGLSULNOMXþNLQDQHSUHNLQMHQLKWUDNRYLK,(&
Packaging of components for automatic handling - Part 1: Tape packaging of
components with axial leads on continuous tapes (IEC 60286-1:2017)
Gurtung und Magazinierung von Bauelementen für automatische Verarbeitung - Teil 1:
Gurtung von Bauelementen mit axialen Anschlüssen (IEC 60286-1:2017)
Emballage des composants pour opérations automatisées - Partie 1: Emballage des
composants à sorties axiales en bandes continues (IEC 60286-1:2017)
Ta slovenski standard je istoveten z: EN 60286-1:2017
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
55.060 Tulci. Vretena Spools. Bobbins
SIST EN 60286-1:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60286-1:2018

---------------------- Page: 2 ----------------------

SIST EN 60286-1:2018


EUROPEAN STANDARD EN 60286-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2017
ICS 31.020; 31.240 Supersedes EN 60286-1:1998
English Version
Packaging of components for automatic handling -
Part 1: Tape packaging of components with axial leads
on continuous tapes
(IEC 60286-1:2017)
Emballage des composants pour opérations automatisées - Gurtung und Magazinierung von Bauelementen für
Partie 1: Emballage des composants à sorties axiales automatische Verarbeitung - Teil 1: Gurtung von
en bandes continues Bauelementen mit axialen Anschlüssen
(IEC 60286-1:2017) (IEC 60286-1:2017)
This European Standard was approved by CENELEC on 2017-08-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60286-1:2017 E

---------------------- Page: 3 ----------------------

SIST EN 60286-1:2018
EN 60286-1:2017
European foreword
The text of document 40/2538/FDIS, future edition 3 of IEC 60286-1, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60286-1:2017.

The following dates are fixed:
(dop) 2018-05-30
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-08-30
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60286-1:1998.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60286-1:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60286-2 NOTE Harmonized as EN 60286-2.
IEC 60286-3 NOTE Harmonized as EN 60286-3.
IEC 60301 NOTE Harmonized as EN 60301.
2

---------------------- Page: 4 ----------------------

SIST EN 60286-1:2018
EN 60286-1:2017
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this doc
...