EN IEC 62969-1:2018
(Main)Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors
Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors
IEC 62969-1:2017(E) provides general requirements for performance evaluations and environmental conditions for the power interface of automotive vehicle sensors. For performance evaluations, various electrical performances such as voltage drop from power source to automotive sensors, AC noises and voltage level are included. For environmental conditions, various test conditions such as temperature, humidity and vibration are included. In addition, terms, definitions, symbols and configurations are covered in this part.
Halbleiterbauelemente - Halbleiterschnittstelle für Automobile - Teil 1: Allgemeine Anforderungen an Energie-Schnittstellen für Automobil-Sensoren
Dispositifs à semiconducteurs - Interface à semiconducteurs pour les véhicules automobiles - Partie 1 : Exigences générales de l'interface d’alimentation destinée aux capteurs des véhicules automobiles
L’IEC 62969-1:2017 traite des exigences générales concernant les évaluations de performance et les conditions environnementales pour l’interface d’alimentation des capteurs de véhicule automobile. Pour les évaluations de performance, diverses performances électriques telles que la chute de tension entre la source d’alimentation et les capteurs automobiles, les bruits CA et le niveau de tension sont traitées. Pour les conditions environnementales, diverses conditions d’essai telles que la température, l’humidité et les vibrations sont traitées. Les termes, les définitions, les symboles et les configurations sont également couverts dans cette partie.
Polprevodniški elementi - Polprevodniški vmesnik za motorna vozila - 1. del: Splošne zahteve za napajalni vmesnik za senzorje motornih vozil (IEC 62969-1:2017)
Ta del standarda IEC 62969 podaja splošne zahteve za vrednotenje učinkovitosti in okoljske pogoje za napajalni vmesnik za senzorje motornih vozil. Pri
vrednotenju učinkovitosti so vključene različne električne zmogljivosti, kot so padec napetosti med virom
napajanja tipal v avtomobilih, šumi zaradi izmenične napetosti in raven napetosti. Pri okoljskih
pogojih so vključeni različni preskusni pogoji, kot so temperatura, vlažnost in vibracije.
Poleg tega so v tem delu zajeti izrazi, definicije, simboli in konfiguracije.
OPOMBA: Dodatne informacije o napajalnem vmesniku za senzorje motornih vozil so podane v dodatku A.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62969-1:2018
01-april-2018
Polprevodniški elementi - Polprevodniški vmesnik za motorna vozila - 1. del:
Splošne zahteve za napajalni vmesnik za senzorje motornih vozil (IEC 62969-
1:2017)
Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1:
General requirements of power interface for automotive vehicle sensors (IEC 62969-
1:2017)
Ta slovenski standard je istoveten z: EN IEC 62969-1:2018
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
43.040.10 (OHNWULþQDLQHOHNWURQVND Electrical and electronic
RSUHPD equipment
SIST EN IEC 62969-1:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62969-1:2018
---------------------- Page: 2 ----------------------
SIST EN IEC 62969-1:2018
EUROPEAN STANDARD EN IEC 62969-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2018
ICS 31.080.99
English Version
Semiconductor devices - Semiconductor interface for automotive
vehicles - Part 1: General requirements of power interface for
automotive vehicle sensors
(IEC 62969-1:2017)
Dispositifs à semiconducteurs - Interface à Halbleiterbauelemente - Halbleiterschnittstelle für
semiconducteurs pour les véhicules automobiles - Partie 1 : Automobile - Teil 1: Allgemeine Anforderungen an Energie-
Exigences générales de l'interface d'alimentation destinée Schnittstellen für Automobil-Sensoren
aux capteurs des véhicules automobiles (IEC 62969-1:2017)
(IEC 62969-1:2017)
This European Standard was approved by CENELEC on 2018-01-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62969-1:2018 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62969-1:2018
IEC EN 62969-1:2018 (E)
European foreword
The text of document 47/2433/FDIS, future edition 1 of IEC 62969-1, prepared by IEC/TC
47 "Semiconductor devices" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62969-1.
The following dates are fixed:
• latest date by which the document has to be (dop) 2018-10-17
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-01-17
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62969-1:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61508 (all parts) NOTE Harmonized as EN 61508 (all parts).
2
---------------------- Page: 4 ----------------------
SIST EN IEC 62969-1:2018
IEC EN 62969-1:2018 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.