EN 60539-1:2016
(Main)Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
IEC 60539-1:2016 is applicable to directly heated negative temperature coefficient thermistors, typically made from transition metal oxide materials with semiconducting properties. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose. IEC 60539 is applicable to directly heated negative temperature coefficient thermistors, typically made from transition metal oxide materials with semiconducting properties. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose. This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision. Tables, figures and references have been revised.
Direkt geheizte temperaturabhängige Widerstände mit negativem Temperaturkoeffizienten - Teil 1: Fachgrundspezifikation
Thermistances à coefficient de température négatif à chauffage direct - Partie 1: Spécification générique
L'IEC 60539-1:2016 s'applique aux thermistances à coefficient de température négatif à chauffage direct, typiquement constituées de matériaux faits d'oxyde de métal de transition présentant des propriétés semi-conductrices. Elle établit des définitions, des procédures de contrôle et des méthodes d'essai normalisées à utiliser dans les spécifications intermédiaires et particulières des composants électroniques, pour les systèmes d'assurance de la qualité ou pour tout autre usage. Cette troisième édition annule et remplace la deuxième édition parue en 2008. Cette édition constitue une révision technique. Les tableaux, figures et références ont été révisés.
Neposredno ogrevani termistorji z negativnim koeficientom - 1. del: Rodovna specifikacija (IEC 60539-1:2016)
Ta del standarda IEC 60539 se uporablja za neposredno ogrevane termistorje z negativnim koeficientom, ki so običajno izdelani iz materialov prehodnega kovinskega oksida s polprevodniškimi lastnostmi.
Določa splošne pogoje, inšpekcijske postopke in preskusne metode za uporabo v področnih in podrobnih specifikacijah elektronskih komponent za oceno kakovosti ali kateri koli drug namen.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60539-1:2016
01-oktober-2016
1DGRPHãþD
SIST EN 60539-1:2008
Neposredno ogrevani termistorji z negativnim koeficientom - 1. del: Rodovna
specifikacija (IEC 60539-1:2016)
Directly heated negative temperature coefficient thermistors - Part 1: Generic
specification (IEC 60539-1:2016)
Thermistances à coefficient de température négatif à chauffage direct - Partie 1:
Spécification générique
Ta slovenski standard je istoveten z: EN 60539-1:2016
ICS:
31.040.30 Termistorji Thermistors
SIST EN 60539-1:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60539-1:2016
---------------------- Page: 2 ----------------------
SIST EN 60539-1:2016
EUROPEAN STANDARD EN 60539-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2016
ICS 31.040.30 Supersedes EN 60539-1:2008
English Version
Directly heated negative temperature coefficient thermistors -
Part 1: Generic specification
(IEC 60539-1:2016)
Thermistances à coefficient de température négatif à Direkt geheizte temperaturabhängige Widerstände mit
chauffage direct - Partie 1: Spécification générique negativem Temperaturkoeffizienten -
(IEC 60539-1:2016) Teil 1: Fachgrundspezifikation
(IEC 60539-1:2016)
This European Standard was approved by CENELEC on 2016-06-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60539-1:2016 E
---------------------- Page: 3 ----------------------
SIST EN 60539-1:2016
EN 60539-1:2016
European foreword
The text of document 40/2430/FDIS, future edition 3 of IEC 60539-1, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60539-1:2016.
The following dates are fixed:
(dop) 2017-03-01
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-06-01
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 60539-1:2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60539-1:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60027-1 NOTE Harmonized as EN 60027-1.
ISO 80000-1:2009 NOTE Harmonized as EN ISO 80000-1:2013 (not modified).
2
---------------------- Page: 4 ----------------------
SIST EN 60539-1:2016
EN 60539-1:2016
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Pu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.