EN 62090:2017

Product package labels for electronic components using bar code and two- dimensional symbologies

IEC 62090:2017(E) applies to labels on the packaging of electronic components for automatic handling in B2B processes. These labels use linear bar code and two-dimensional (2D) symbols. Labels for direct product marking and shipping labels are excluded. Labels required on the packaging of electronic components that are intended for the retail channel of distribution in B2C processes are also excluded from this document. Bar code and 2D symbol markings are used, in general, for automatic identification and automatic handling of components in electronics assembly lines. Intended applications include systems that automate the control of component packages during production, inventory and distribution. This edition includes the following significant technical changes with respect to the previous edition: a) Applicable data elements have been added. Data identifiers of those data elements are “10D”, “14D”, ”2P”, “25L”, “18V”, “V”, “J”, “3S”, “13E”, “33L” and “34L”. b) The following new informative annexes have been added: - Annex C, URL; - Annex D, Examples of data element short titles; - Annex E, Package levels for component package labels.

Etiketten für Verpackungen elektronischer Bauelemente unter Anwendung von Strichcodierung und zweidimensionaler Symbologien

Etiquettes d'emballage de produits pour composants électroniques, utilisant un code à barres et une symbologie bidimensionelle

L'IEC 62090:2017 s’applique aux étiquettes apposées sur l’emballage des composants électroniques pour opérations automatisées dans les processus B2B. Ces étiquettes utilisent un code à barres linéaire et des symboles bidimensionnels (2D). Les étiquettes pour le marquage de produit direct et les étiquettes de transport sont exclues. Les étiquettes exigées sur l’emballage des composants électroniques qui sont destinés au circuit de distribution de détail dans les processus B2C sont aussi exclues du présent document. En général, le code à barres et les marquages de symboles 2D sont utilisés pour l’identification et la manipulation automatiques de composants dans les chaînes de montage en électronique. Les applications prévues comprennent des systèmes qui automatisent le contrôle des emballages de composants pendant la production, l’inventaire et la distribution. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: a) Ajout d’éléments de données applicables: Les identificateurs de données des éléments de données sont “ 10D ”, “ 14D ”, “ 2P ”, “ 25L ”, “ 18V ”, “ V ”, “ J ”, “ 3S ”, “ 13E ”, “ 33L ” et “ 34L ”. b) Ajout des nouvelles annexes informatives suivantes: - Annexe C, URL; - Annexe D, Exemples de titres abrégés pour des éléments de données; - Annexe E, Niveaux d’emballage pour les étiquettes d’emballage de composants.

Označbe za pakiranje elektronskih komponent s črtnimi kodami in dvodimenzionalnimi simboli

Ta dokument se uporablja za oznake na embalaži elektronskih komponent za samodejno upravljanje pri procesih B2B. Na teh oznakah so uporabljene linearne črtne kode in dvodimenzonalni (2D) simboli. Oznake za neposredno označevanje izdelkov in oznake za dobavo so izključene. Oznake, ki so zahtevane na embalaži elektronskih komponent, ki so namenjene prodajnemu kanalu distribucije pri procesih B2C, ravno tako niso zajete v tem dokumentu.
Splošno gledano se uporabljajo črtna koda in simbolne oznake 2D za samodejno prepoznavanje in upravljanje komponent na tekočih trakovih za elektroniko. Med namensko uporabo spadajo sistemi, ki omogočajo avtomatizacijo kontrole paketov komponent med proizvodnjo, ustvarjanjem inventarja in distribucijo.

General Information

• Status: Published
• Publication Date: 06-Jul-2017
• Withdrawal Date: 15-May-2020
• ICS: 31.190 - Electronic component assemblies
• ICS: 31.200 - Integrated circuits. Microelectronics
• ICS: 35.040 - Information coding
• Technical Committee: CLC/SR 91 - Electronics assembly technology
• Drafting Committee: IEC/TC 91 - IEC_TC_91
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 07-Jul-2017
• Completion Date: 07-Jul-2017
• Ref Project: SIST EN 62090:2018 - Product package labels for electronic components using bar code and two- dimensional symbologies

Relations

• Replaces: EN 62090:2003 - Product package labels for electronic components using bar code and two- dimensional symbologies
• Effective Date: 26-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62090:2018
01-marec-2018
1DGRPHãþD
SIST EN 62090:2003
2]QDþEH]DSDNLUDQMHHOHNWURQVNLKNRPSRQHQWVþUWQLPLNRGDPLLQ
GYRGLPHQ]LRQDOQLPLVLPEROL
Product package labels for electronic components using bar code and two- dimensional
symbologies
Etiketten für Verpackungen elektronischer Bauelemente unter Anwendung von
Strichcodierung und zweidimensionaler Symbologien
Etiquettes d'emballage de produits pour composants électroniques, utilisant un code à
barres et une symbologie bidimensionelle
Ta slovenski standard je istoveten z: EN 62090:2017
ICS:
31.190 Sestavljeni elektronski Electronic component
elementi assemblies
35.040.50 Tehnike za samodejno Automatic identification and
razpoznavanje in zajem data capture techniques
podatkov
SIST EN 62090:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62090:2018

---------------------- Page: 2 ----------------------

SIST EN 62090:2018


EUROPEAN STANDARD EN 62090

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2017
ICS 31.190; 31.200; 35.040 Supersedes EN 62090:2003
English Version
Product package labels for electronic components using bar
code and two- dimensional symbologies
(IEC 62090:2017)
Etiquettes d'emballage de produits pour composants Etiketten für Verpackungen elektronischer Bauelemente
électroniques, utilisant un code à barres et une symbologie unter Anwendung von Strichcodierung und
bidimensionelle zweidimensionaler Symbologien
(IEC 62090:2017) (IEC 62090:2017)
This European Standard was approved by CENELEC on 2017-05-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62090:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62090:2018
EN 62090:2017
European foreword
The text of document 91/1394/CDV, future edition 2 of IEC 62090, prepared by IEC/TC 91 "Electronics
assembly technology" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN 62090:2017.

The following dates are fixed:
(dop) 2018-02-16
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-05-16
standards conflicting with the
document have to be withdrawn

This document supersedes EN 62090:2003.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62090:2017 was approved by CENELEC as a European
Standard without any modification.
IEC 60194 NOTE Harmonized as EN 60194.
IEC 60286-1 NOTE Harmonized as EN 60286-1.
IEC 60286-2 NOTE Harmonized as EN 60286-2.
IEC 60286-3 NOTE Harmonized as EN 60286-3.
IEC 60286-4 NOTE Harmonized as EN 60286-4.
IEC 60286-5 NOTE Harmonized as EN 60286-5.
IEC 60286-6 NOTE Harmonized as EN 60286-6.
IEC 61760-4 NOTE Harmonized as EN 61760-4.
ISO/IEC 15416 NOTE Harmonized as EN ISO/IEC 15416.
ISO/IEC 15438 NOTE Harmonized as EN ISO/IEC 15438.
ISO 3166-1 NOTE Harmonized as EN ISO 3166-1.

2

---------------------- Page: 4 ----------------------

SIST EN 62090:2018
EN 62090:2017

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, ar
...