EN 60393-1:2009

Potentiometers for use in electronic equipment - Part 1: Generic specification

IEC 60393-1:2008(E) is applicable to all types of resistive potentiometers, including lead-screw actuated types, presets, multi-turn units, etc. to be used in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose. It has been mainly written, and the test methods described, to conform to the widely used single-turn rotary potentiometer with an operating shaft . This edition contains the following significant technical changes with respect to the previous edition: implementation of Annex H which replaces Section 3 of the previous edition. It also includes minor revisions related to tables, figures and references.

Potentiometer zur Verwendung in Geräten der Elektronik - Teil 1: Fachgrundspezifikation

Potentiomètres utilisés dans les équipements électroniques - Partie 1: Spécification générique

L'IEC 60393-1:2008 est applicable à tous les types de potentiomètres résistifs, y compris les potentiomètres à commande par vis, les potentiomètres d'ajustement, les potentiomètres multitours, etc., utilisés dans les équipements électroniques. Elle définit les termes normalisés et établit des procédures de contrôle et des méthodes d'essai normalisées à utiliser dans les spécifications intermédiaires et particulières de composants électroniques pour l'assurance de la qualité ou à toute autre fin. Elle a été principalement rédigée, et les méthodes d'essai ont été décrites, pour être en conformité avec les potentiomètres rotatifs monotour avec axe de commande, qui sont largement répandus. Cette édition comporte les modifications techniques significatives suivantes par rapport à la précédente édition: mise en oeuvre de l'Annexe H, qui remplace la section 3 de la précédente édition.

Potenciometri za elektronsko opremo - 1. del: Rodovna specifikacija (IEC 60393-1:2008)

General Information

• Status: Published
• Publication Date: 29-Jul-2009
• Withdrawal Date: 30-Jun-2012
• ICS: 31.040.20 - Potentiometers, variable resistors
• Technical Committee: CLC/SR 40 - Capacitors and resistors for electronic equipment
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Parallel Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 30-Jul-2009
• Completion Date: 30-Jul-2009
• Ref Project: SIST EN 60393-1:2009 - Potentiometers for use in electronic equipment - Part 1: Generic specification (IEC 60393-1:2008)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Potenciometri za elektronsko opremo - 1. del: Rodovna specifikacija (IEC 60393-1:2008)Potentiometer zur Verwendung in Geräten der Elektronik - Teil 1: Fachgrundspezifikation (IEC 60393-1:2008)Potentiomètres utilisés dans les équipements électroniques - Partie 1: Spécification générique (CEI 60393-1:2008)Potentiometers for use in electronic equipment - Part 1: Generic specification (IEC 60393-1:2008)31.040.20Potenciometri, spremenljivi uporiPotentiometers, variable resistorsICS:Ta slovenski standard je istoveten z:EN 60393-1:2009SIST EN 60393-1:2009en01-oktober-2009SIST EN 60393-1:2009SLOVENSKI
STANDARD



SIST EN 60393-1:2009



EUROPEAN STANDARD EN 60393-1 NORME EUROPÉENNE
EUROPÄISCHE NORM July 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60393-1:2009 E
ICS 31.040.20 Supersedes CECC 41 000:1976
English version
Potentiometers for use in electronic equipment -
Part 1: Generic specification (IEC 60393-1:2008)
Potentiomètres utilisés
dans les équipements électroniques -
Partie 1: Spécification générique (CEI 60393-1:2008)
Potentiometer zur Verwendung
in Geräten der Elektronik -
Teil 1: Fachgrundspezifikation (IEC 60393-1:2008)
This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 60393-1:2009



EN 60393-1:2009 - 2 -
Foreword The text of document 40/1897/FDIS, future edition 3 of IEC 60393-1, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60393-1 on 2009-07-01. This European Standard supersedes CECC 41 000:1976. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2010-04-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2012-07-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60393-1:2008 was approved by CENELEC as a European Standard without any modification. __________
SIST EN 60393-1:2009



- 3 - EN 60393-1:2009 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60027-1 -1) Letter symbols to be used in electrical technology -
Part 1: General EN 60027-1 20062)
IEC 60050 Series International Electrotechnical Vocabulary (IEV) - -
IEC 60062 -1) Marking codes for resistors and capacitors EN 60062 + corr. January
20052) 2007
IEC 60063 A1 A2 1963 1967 1977 Preferred number series for resistors and capacitors - -
IEC 60068-1 + corr. October
+ A1 1988 1988 1992 Environmental testing -
Part 1: General and guidance
EN 60068-1
1994
IEC 60068-2-1 A1 A2 1990 1993 1994 Environmental testing -
Part 2: Tests - Tests A: Cold EN 60068-2-13) A1 A2
1993 1993 1994
IEC 60068-2-2 A1 A2 1974 1993 1994 Environmental testing -
Part 2: Tests - Tests B: Dry heat EN 60068-2-24)
A1 A2
1993 1993 1994
IEC 60068-2-6 -1) Environmental testing -
Part 2: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 20082)
IEC 60068-2-13 -1) Environmental testing -
Part 2: Tests - Test M: Low air pressure EN 600
...