Definitions related to material efficiency

Standardisation Request M/543 requires the following: "Definition of parameters and methods relevant for assessing durability, upgradability and ability to repair, re-use and re-manufacture of products". Hence, this Technical Report "Definitions related to material efficiency" will constitute a collection of common terms used in deliverables prepared in accordance with M/543. The purpose of such a collection is to provide a single definition of key terms used in different deliverables from the CEN-CENELEC TC10. The source of the terms and definitions can be documents developed in the various working groups of the CEN-CENELEC TC10 or any text referenced by such documents. In case of discrepancies between multiple definitions for the same term, this Technical report will recommend a preferred definition.

Definitionen zur Materialeffizienz

Définitions relatives à l’utilisation rationnelle des matériaux

Le présent document fournit un recueil de tous les termes dont l’utilisation a été convenue dans les normes CEN-CLC, dans la série de normes 45552 - 45559. Ces termes sont destinés à être utilisés dans d’autres normes sur l’utilisation rationnelle des matériaux, élaborées à partir des normes CEN-CLC, dans la série de normes 45552 - 45559, ou destinées à compléter cette série. Ils constituent également la base de l’élaboration de nouvelles définitions utilisées dans les normes spécifiques à un produit relatives à l’utilisation rationnelle des matériaux.

Definicije, povezane z učinkovitostjo materiala

General Information

Status
Published
Publication Date
03-Dec-2020
Current Stage
6060 - Document made available - Publishing
Start Date
04-Dec-2020
Due Date
19-Dec-2019
Completion Date
04-Dec-2020

Buy Standard

Technical report
TP CLC/TR 45550:2021
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CLC/TR 45550:2021
01-marec-2021
Definicije, povezane z učinkovitostjo materiala
Definitions related to material efficiency
Definitionen zur Materialeffizienz
Définitions relatives à l’utilisation rationnelle des matériaux
Ta slovenski standard je istoveten z: CLC/TR 45550:2020
ICS:
01.040.13 Okolje. Varovanje zdravja. Environment. Health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
SIST-TP CLC/TR 45550:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TP CLC/TR 45550:2021

---------------------- Page: 2 ----------------------
SIST-TP CLC/TR 45550:2021

TECHNICAL REPORT CLC/TR 45550

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
December 2020
ICS 01.040.13; 13.020.20
English Version
Definitions related to material efficiency
Définitions relatives à l'utilisation rationnelle des matériaux Definitionen zur Materialeffizienz
This Technical Report was approved by CEN and CENELEC on 30 November 2020.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and United Kingdom





European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for
CEN/CENELEC CENELEC Members.
 Ref. No. CLC/TR 45550:2020 E

---------------------- Page: 3 ----------------------
SIST-TP CLC/TR 45550:2021
CLC/TR 45550:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Terms and definitions related to material efficiency . 5
4.1 General . 5
4.2 Terms and definitions related to the general method for the assessment of the durability of
energy-related products (from EN 45552:2020) . 5
4.2.1 Terms related to durability and reliability . 5
4.2.2 Terms related to functions . 6
4.2.3 Terms related to the uses . 7
4.2.4 Other terms. 7
4.3 Terms and definitions related to the general method for the assessment of the ability to
remanufacture energy-related products (from EN 45553:2020). 8
4.4 Terms and definitions related to the general methods for the assessment of the ability to
repair, reuse and upgrade energy-related products (from EN 45554:2020) . 8
4.5 Terms and definitions related to the general methods for assessing the recyclability and
recoverability of energy-related products (from EN 45555:2019) . 9
4.6 Terms and definitions related to the general method for assessing the proportion of reused
components in energy-related products (from EN 45556) .10
4.7 Terms and definitions related to the general method for assessing the proportion of
recycled material content in energy-related products (from EN 45557:2020) .11
4.7.1 De
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.