EN IEC 62026-1:2019

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules

IEC 62026-1:2019 is available as IEC 62026-1:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62026-1:2019 applies to interfaces between low-voltage switchgear, controlgear, and controllers (e.g. programmable controllers, personal computers, etc.). This document does not apply to higher level industrial communication networks that have become known as fieldbuses and are considered by IEC subcommittee 65C. This third edition cancels and replaces the second edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) additional requirements for safety information and instructions, including the measures to be taken, if any, for achieving EMC compliance; b) EMC immunity requirements aligned with current IEC 61000-6 series of standards. Radiated radio-frequency electromagnetic fields test level increased to 6 GHz; c) EMC emissions requirements aligned with current CISPR 11 publication.

Niederspannungsschaltgeräte - Steuerung-Geräte-Netzwerke (CDIs) - Teil 1: Allgemeine Festlegungen

Appareillage à basse tension - Interfaces appareil de commande-appareil (CDI) - Partie 1: Règles générales

IEC 62026-1:2019 est disponible sous forme de IEC 62026-1:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62026-1:2019 s’applique aux interfaces entre l’appareillage à basse tension et des appareils de commande (par exemple automates programmables, ordinateurs personnels, etc.). Le présent document ne s’applique pas aux réseaux de communication industriels de plus haut niveau connus sous le nom de bus de terrain et qui relèvent du sous-comité 65C de l’IEC. Cette troisième édition annule et remplace la deuxième édition parue en 2007. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) exigences supplémentaires pour les informations et les instructions relatives à la sécurité, notamment les mesures à prendre, s’il y a lieu, pour parvenir à la conformité CEM; b) alignement des exigences CEM concernant l’immunité sur celles de la série de normes IEC 61000-6. Niveau d’essai des champs électromagnétiques rayonnés aux fréquences radioélectriques porté à 6 GHz; c) alignement des exigences CEM concernant les émissions sur celles de la publication CISPR 11 actuelle.

Nizkonapetostne stikalne in krmilne naprave - Vmesniki krmilnikov (CDIs) - 1. del: Splošna pravila (IEC 62026-1:2019)

Ta del standarda IEC 62026 se uporablja za vmesnike med nizkonapetostnimi stikalnimi in krmilnimi napravami ter krmilniki (npr. programirljive krmilnike, osebne računalnike itd.).
Ta dokument se ne uporablja za visokonivojska industrijska komunikacijska omrežja, ki so bila poimenovana »vodila« in jih obravnava pododbor IEC 65C.
Namen tega dokumenta je uskladiti in določiti pravila, komponente ter splošne zahteve, ki se uporabljajo za industrijske vmesnike krmilnikov. Te značilnosti različnih standardov za vmesnike krmilnikov, ki jih je mogoče obravnavati kot splošne, so tako združene v tem dokumentu.
Za vsak vmesnik krmilnika sta potrebna dva glavna dokumenta, ki določata vse zahteve in preskuse:
a) ta dokument, imenovan »IEC 62026-1« v zadevnih delih o vmesnikih krmilnikov, ki zajemajo različne vrste vmesnikov krmilnikov;
b) poseben del o vmesnikih krmilnikov iz skupine standardov IEC 62026.
Poseben del o vmesnikih krmilnikov lahko izpušča splošno zahtevo, če se ne uporablja, ali pa jo dopolnjuje, če je neustrezna v določenem primeru.
OPOMBA: Posebne zahteve za izdelke, ki vključujejo vmesnik krmilnika, so podane v ustreznih standardih za izdelek.
Te zahteve se uporabljajo poleg zahtev, podanih v tem dokumentu.

General Information

• Status: Published
• Publication Date: 11-Jul-2019
• Withdrawal Date: 12-Jun-2022
• ICS: 29.130.20 - Low voltage switchgear and controlgear
• Technical Committee: CLC/TC 121A - Low-voltage switchgear and controlgear
• Drafting Committee: IEC/SC 121A - Low-voltage switchgear and controlgear
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 12-Jul-2019
• Completion Date: 12-Jul-2019
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/404 - Standardisation Mandate to CEN, CENELEC and ETSI for harmonized standard according to the Electro Magnetic Compatibility (EMC) Directive 2004/108/EC
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Mandate: M/552 - [C(2016) 7641 final] Standardisation request as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility
• Ref Project: SIST EN IEC 62026-1:2019 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules (IEC 62026-1:2019)

Relations

• Replaces: EN 62026-1:2007 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62026-1:2019
01-oktober-2019
Nadomešča:
SIST EN 62026-1:2007
Nizkonapetostne stikalne in krmilne naprave - Vmesniki krmilnikov (CDIs) - 1. del:
Splošna pravila (IEC 62026-1:2019)
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1:
General rules (IEC 62026-1:2019)
Niederspannungsschaltgeräte - Steuerung-Geräte-Netzwerke (CDIs) - Teil 1: Allgemeine
Festlegungen (IEC 62026-1:2019)
Appareillage à basse tension - Interfaces appareil de commande-appareil (CDI) - Partie
1: Règles générales (IEC 62026-1:2019)
Ta slovenski standard je istoveten z: EN IEC 62026-1:2019
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
SIST EN IEC 62026-1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 62026-1:2019

---------------------- Page: 2 ----------------------

SIST EN IEC 62026-1:2019


EUROPEAN STANDARD EN IEC 62026-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2019
ICS 29.130.20 Supersedes EN 62026-1:2007 and all of its amendments
and corrigenda (if any)
English Version
Low-voltage switchgear and controlgear - Controller-device
interfaces (CDIs) - Part 1: General rules
(IEC 62026-1:2019)
Appareillage à basse tension - Interfaces appareil de Niederspannungsschaltgeräte - Steuerung-Geräte-
commande-appareil (CDI) - Partie 1: Règles générales Netzwerke (CDIs) - Teil 1: Allgemeine Festlegungen
(IEC 62026-1:2019) (IEC 62026-1:2019)
This European Standard was approved by CENELEC on 2019-06-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62026-1:2019 E

---------------------- Page: 3 ----------------------

SIST EN IEC 62026-1:2019
EN IEC 62026-1:2019 (E)
European foreword
The text of document 121A/280/FDIS, future edition 3 of IEC 62026-1, prepared by SC 121A "Low-
voltage switchgear and controlgear" of IEC/TC 121 "Switchgear and controlgear and their assemblies
for low voltage" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 62026-1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-03-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-06-13
document have to be withdrawn

This document supersedes EN 62026-1:2007 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62026-1:2019 was approved by CENELEC as a European
Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61000-6 (series) NOTE Harmonized as EN 61000-6 (series)
IEC 62026 (series) NOTE Harmonized as EN 62026 (series)

2

---------------------- Page: 4 ----------------------

SIST EN IEC 62026-1:2019
EN IEC 62026-1:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For
...