EN 60300-3-4:2008

Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements

Gives guidance on specifying required dependability characteristics in product and equipment specifications, together with specifications of procedures and criteria for verification. Includes advice on specifying quantitative and qualitative reliability, maintainability and availability requirements. The main changes from the previous edition are: the concept of systems has been included and the need to specify the dependability of the system and not just the physical equipment has been stressed; the need for verification and validation of the requirement has been included; differentiation has been made between requirements, that can be measured and verified and validated, and goals, which cannot; and the content on availability, maintainability and maintenance support has been updated and expanded to similar level of detail to reliability.

Zuverlässigkeitsmanagement - Teil 3-4: Anwendungsleitfaden - Anleitung zum Festlegen von Zuverlässigkeitsforderungen

Gestion de la sûreté de fonctionnement - Partie 3-4: Guide d'application - Spécification d'exigences de sûreté de fonctionnement

Donne des recommandations pour spécifier les caractéristiques de sûreté de fonctionnement qui sont préscrites dans les spécifications de produits et de matériels, ainsi que pour spécifier les procédures et les critères de vérification. On trouve notamment des conseils pour spécifier des exigences quantitatives et qualitatives de fiabilité, de maintenabilité et de disponibilité. Les modifications majeures par rapport à l'édition précédente sont les suivantes: le concept de système a été introduit et la nécessité de spécifier la sûreté de fonctionnement du système et non uniquement celle des équipements physiques est mise en évidence; la nécessité de la vérification et de la validation des exigences a été introduite; une différenciation est apportée entre les exigences qui peuvent être mesurées, vérifiées et validées et les objectifs qui eux, ne le peuvent pas; le contenu du support de disponibilité, de maintenabilité et de maintenance a été mis à jour et étendu à un niveau de détail similaire à celui du support de fiabilité.",PE

Upravljanje zagotovljivosti - 3-4. del: Vodilo za uporabo - Vodilo za specifikacijo zahtev za zagotovljivost (IEC 60300-3-4:2007)

General Information

• Status: Published
• Publication Date: 10-Jan-2008
• Withdrawal Date: 30-Nov-2010
• ICS: 03.100.40 - Research and development
• ICS: 03.120.01 - Quality in general
• Technical Committee: CLC/SR 56 - Dependability
• Drafting Committee: IEC/TC 56 - IEC_TC_56
• Parallel Committee: IEC/TC 56 - IEC_TC_56
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 11-Jan-2008
• Completion Date: 11-Jan-2008
• Ref Project: SIST EN 60300-3-4:2008 - Dependability management -- Part 3-4: Application guide - Guide to the specification of dependability requirements

Relations

• Replaced By: EN IEC 60300-3-4:2022 - Dependability management - Part 3-4: Application guide - Specification of dependability requirements
• Effective Date: 07-Feb-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60300-3-4:2008
01-marec-2008
Upravljanje zagotovljivosti - 3-4. del: Vodilo za uporabo - Vodilo za specifikacijo
zahtev za zagotovljivost (IEC 60300-3-4:2007)
Dependability management -- Part 3-4: Application guide - Guide to the specification of
dependability requirements
Zuverlässigkeitsmanagement -- Teil 3-4: Anwendungsleitfaden - Anleitung zum
Festlegen von Zuverlässigkeitsforderungen
Gestion de la sûreté de fonctionnement -- Partie 3-4: Guide d'application - Spécification
d'exigences de sûreté de fonctionnement
Ta slovenski standard je istoveten z: EN 60300-3-4:2008
ICS:
03.120.01 Kakovost na splošno Quality in general
21.020 =QDþLOQRVWLLQQDþUWRYDQMH Characteristics and design of
VWURMHYDSDUDWRYRSUHPH machines, apparatus,
equipment
SIST EN 60300-3-4:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60300-3-4:2008

---------------------- Page: 2 ----------------------

SIST EN 60300-3-4:2008


EUROPEAN STANDARD
EN 60300-3-4

NORME EUROPÉENNE
January 2008
EUROPÄISCHE NORM

ICS 03.100.40; 03.120.01


English version


Dependability management -
Part 3-4: Application guide -
Guide to the specification of dependability requirements
(IEC 60300-3-4:2007)


Gestion de la sûreté de fonctionnement -  Zuverlässigkeitsmanagement -
Partie 3-4: Guide d'application - Teil 3-4: Anwendungsleitfaden -
Spécification d'exigences de sûreté Anleitung zum Festlegen von
de fonctionnement Zuverlässigkeitsforderungen
(CEI 60300-3-4:2007) (IEC 60300-3-4:2007)




This European Standard was approved by CENELEC on 2007-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60300-3-4:2008 E

---------------------- Page: 3 ----------------------

SIST EN 60300-3-4:2008
EN 60300-3-4:2008 – 2 –
Foreword
The text of document 56/1212/FDIS, future edition 2 of IEC 60300-3-4, prepared by IEC TC 56,
Dependability, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60300-3-4 on 2007-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60300-3-4:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60812 NOTE Harmonized as EN 60812:2006 (not modified).
IEC 61165 NOTE Harmonized as EN 61165:2006 (not modified).
IEC 61508-1 NOTE Harmonized as EN 61508-1:2001 (not modified).
Harmonized as EN 61508-2:2001 (not modified).
IEC 61508-2 NOTE
Harmonized as EN 61508-3:2001 (not modified).
IEC 61508-3 NOTE
IEC 61508-4 NOTE Harmonized as EN 61508-4:2001 (not modified).
IEC 61508-5 NOTE Harmonized as EN 61508-5:2001 (not modified).
IEC 61508-6 NOTE Harmonized as EN 61508-6:2001 (not modified).
IEC 61508-7 NOTE Harmonized as EN 61508-7:2001 (not modified).
Harmonized as EN 61709:1998 (not modified).
IEC 61709 NOTE
__________

---------------------- Page: 4 ----------------------

SIST EN 60300-3-4:2008
– 3 – EN 60300-3-4:2008

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publica
...