Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)

IEC 62386-207:2018 specifies a bus system for control by digital signals of electronic ligthing equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
fast fade time has been redefined;
short circuit and open circuit have been deleted;
physical selection has been deleted;
dimming curve selection has been moved to a separate part;
load increase, load decrease and reference measurement have been moved to a separate part;
thermal gear and lamp protection have been moved to separate parts;
LED module integrated has been moved to a separate part;
link to IEC 62386-102 error bits has been clarified;
the following commands have been deleted:  
ENABLE CURRENT PROTECTOR
DISABLE CURRENT PROTECTOR
QUERY POSSIBLE OPERATING MODES
QUERY SHORT CIRCUIT
QUERY OPEN CIRCUIT
QUERY CURRENT PROTECTOR ACTIVE
QUERY CURRENT PROTECTOR ENABLED
QUERY OPERATING MODE

Digital adressierbare Schnittstelle für die Beleuchtung - Teil 207: Besondere Anforderungen an Betriebsgeräte - LED-Module (Gerätetyp 6)

Interface d’éclairage adressable numérique - Partie 207: Exigences particulières pour les appareillages de commande - Modules de LED (dispositifs de type 6)

L’IEC 62386-207:2018 spécifie un système à bus pour la commande par des signaux numériques des appareils d'éclairage électroniques conformes aux exigences de l'IEC 61347 (toutes les parties), en ajoutant les alimentations en courant continu. Cette deuxième édition annule et remplace la première édition parue en 2009. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
le temps de variation rapide a été redéfini;
les courts-circuits et les circuits ouverts ont été supprimés;
la sélection physique a été supprimée;
la sélection de la courbe de gradation a été déplacée dans une autre partie;
l’augmentation de charge, la chute de charge et le mesurage de référence ont été déplacés dans une autre partie;
la protection thermique de l'appareillage et la protection thermique de la lampe ont été déplacées dans d’autres parties;
les modules de LED intégrés ont été déplacés dans une autre partie;
le lien avec les bits d’erreur décrits dans l’IEC 62386-102 a été clarifié;
les commandes suivantes ont été supprimées:  
ENABLE CURRENT PROTECTOR
DISABLE CURRENT PROTECTOR
QUERY POSSIBLE OPERATING MODES
QUERY SHORT CIRCUIT
QUERY OPEN CIRCUIT
QUERY CURRENT PROTECTOR ACTIVE
QUERY CURRENT PROTECTOR ENABLED
QUERY OPERATING MODE

Digitalni naslovljivi vmesnik za razsvetljavo - 207. del: Posebne zahteve za krmilja - Moduli LED (naprava tipa 6) (IEC 62386-207:2018)

Ta del standarda IEC 62386 določa sistem vodil za krmiljenje elektronske opreme za razsvetljavo z digitalnimi signali, ki je v skladu z zahtevami standarda IEC 61347 (vsi deli), z dodatkom DC napajalnih enot.
Ta dokument se uporablja samo s standardi IEC 62386-102:2014 in IEC 62386-102:2014/AMD1: – krmilja, povezana z moduli LED.
OPOMBA: Zahteve za preskušanje posameznih proizvodov med proizvodnjo niso vključene.

General Information

Status
Published
Publication Date
31-May-2018
Withdrawal Date
16-May-2021
Current Stage
6060 - Document made available - Publishing
Start Date
01-Jun-2018
Completion Date
01-Jun-2018

Relations

Buy Standard

Standard
EN IEC 62386-207:2018 - BARVE
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62386-207:2018
01-september-2018
1DGRPHãþD
SIST EN 62386-207:2010
Digitalni naslovljivi vmesnik za razsvetljavo - 207. del: Posebne zahteve za krmilja -
Moduli LED (naprava tipa 6) (IEC 62386-207:2018)
Digital addressable lighting interface - Part 207: Particular requirements for control gear -
LED modules (device type 6) (IEC 62386-207:2018)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 207: Besondere
Anforderungen an Betriebsgeräte - LED-Module (Gerätetyp 6) (IEC 62386-207:2018)
Interface d'éclairage adressable numérique - Partie 207: Exigences particulières pour les
appareillages de commande - Modules de DEL (dispositifs de type 6) (IEC 62386-
207:2018)
Ta slovenski standard je istoveten z: EN IEC 62386-207:2018
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN IEC 62386-207:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 62386-207:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 62386-207:2018


EUROPEAN STANDARD EN IEC 62386-207

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2018
ICS 29.140.50; 29.140.99 Supersedes EN 62386-207:2009
English Version
Digital addressable lighting interface - Part 207: Particular
requirements for control gear - LED modules (device type 6)
(IEC 62386-207:2018)
Interface d'éclairage adressable numérique - Partie 207: Digital adressierbare Schnittstelle für die Beleuchtung - Teil
Exigences particulières pour les appareillages de 207: Besondere Anforderungen an Betriebsgeräte - LED-
commande - Modules de LED (dispositifs de type 6) Module (Gerätetyp 6)
(IEC 62386-207:2018) (IEC 62386-207:2018)
This European Standard was approved by CENELEC on 2018-05-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62386-207:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 62386-207:2018
EN IEC 62386-207:2018 (E)
European foreword
The text of document 34/483/FDIS, future edition 2 of IEC 62386-207, prepared by IEC/TC 34 "Lamps
and related equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN IEC 62386-207:2018.

The following dates are fixed:
(dop) 2019-02-17
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-05-17
standards conflicting with the
document have to be withdrawn

This document supersedes EN 62386-207:2009.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62386-207:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61347 (series) NOTE Harmonized as EN 61347 (series).
IEC 61347-1 NOTE Harmonized as EN 61347-1.
2

---------------------- Page: 4 ----------------------

SIST EN IEC 62386-207:2018
EN IEC 62386-207:2018 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding Eu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.