EN 62841-3-13:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills

IEC 62841-3-13:2017 applies to transportable drills, with manually fed axial movement of the spindle, having a maximum chuck capacity of 13 mm. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. Transportable drills are also known as bench drills or drill presses. This part of IEC 62841 does not apply to stationary drilling machines. This part of IEC 62841 does not apply to radial arm drills. This part of IEC 62841 does not apply to magnetic drill stands and drill motors. This Part 3-13 is to be used in conjunction with the first edition of IEC 62841-1:2014. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication Key words: Drills, Hand-held tool, Safety

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-13: Besondere Anforderungen für transportable Bohrmaschinen

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-13: Exigences particulières pour les perceuses transportables

IEC 62841-3-13:2017 s'applique aux perceuses transportables sur lesquelles le mouvement axial de l'arbre est commandé manuellement et qui ont une capacité de mandrin maximale de 13 mm. La tension assignée est inférieure à 3 700 W. Les limites d'application de la présente Norme aux outils fonctionnant sur batterie sont indiquées en K.1 et L.1. La présente Norme traite des dangers présentés par les outils, encourus par tous les individus dans l'utilisation normale et dans l'utilisation impropre raisonnablement prévisible de ces outils. Les outils électroportatifs, qui peuvent être montés sur un support de travail pour être utilisés comme outils installés à poste fixe sans aucune modification de l'outil lui-même, sont compris dans le domaine d'application de la présente Norme et la combinaison d'un outil portatif et d'un support est considérée comme un outil portable, donc couvert par la Partie 3 applicable. Les perceuses transportables sont également appelées perceuses d'établi ou foreuses sur colonne. La présente partie de l'IEC 62841 ne s'applique pas aux perceuses fixes. La présente partie de l'IEC 62841 ne s'applique pas aux perceuses à bras radial. La présente partie de l'IEC 62841 ne s'applique pas aux perceuses magnétiques et à leurs moteurs. La présente Partie 3-13 doit être utilisée conjointement avec la première édition de l'IEC 62841-1:2014. L'attention des Comités Nationaux est attirée sur le fait que les fabricants d'appareils et les organismes d'essai peuvent avoir besoin d'une période transitoire après la publication d'une nouvelle publication IEC, ou d'une publication amendée ou révisée, pour fabriquer des produits conformes aux nouvelles exigences et pour adapter leurs équipements aux nouveaux essais ou aux essais révisés. Le comité recommande que le contenu de cette publication soit entériné au niveau national au plus tôt 36 mois après la date de publication. Mots clés: Perceuses, Outils portables, Sécurité

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-13. del: Posebne zahteve za prenosne vrtalnike (IEC 62841-3-13:2017)

Ta del standarda IEC 62841 se uporablja za prenosne vrtalnike z ročno podajanim osnim premikanjem vretena in največjo zmogljivostjo vpenjala 13 mm.
OPOMBA 101: Prenosni vrtalniki se imenujejo tudi namizni vrtalniki ali vrtalne stiskalnice.
Ta del standarda IEC 62841 se ne uporablja za nepremične vrtalne stroje.
Ta del standarda IEC 62841 se ne uporablja za radialne vrtalnike.
Ta del standarda IEC 62841 se ne uporablja za magnetna stojala za vrtalnike in motorje vrtalnikov.
OPOMBA 102: Magnetna stojala za vrtalnike in motorje vrtalnikov bodo zajeti v naslednjem delu standarda IEC 62841-3.
OPOMBA 103: V Evropi (EN 62841-3-13) veljajo naslednji pogoji:
Radialni vrtalniki in nepremični vrtalni stroji so zajeti v standardu EN 12717.

General Information

• Status: Published
• Publication Date: 22-Jun-2017
• Withdrawal Date: 12-Mar-2021
• ICS: 25.120.40 - Electrochemical machines
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: IEC/TC 116 - Safety of hand-held motor-operated electric tools
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 23-Jun-2017
• Completion Date: 23-Jun-2017
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 62841-3-13:2017 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills (IEC 62841-3-13:2017)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62841-3-13:2017
01-september-2017
(OHNWURPRWRUQDURþQDRURGMDSUHQRVQDRURGMDWHUVWURML]DWUDWRLQYUW9DUQRVW
GHO3RVHEQH]DKWHYH]DSUHQRVQHYUWDOQLNH,(&
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-13: Particular requirements for transportable drills (IEC
62841-3-13:2017)
Ta slovenski standard je istoveten z: EN 62841-3-13:2017
ICS:
25.080.40 Vrtalniki Drilling machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 62841-3-13:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62841-3-13:2017

---------------------- Page: 2 ----------------------

SIST EN 62841-3-13:2017


EUROPEAN STANDARD EN 62841-3-13

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2017
ICS 25.120.40

English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-13: Particular
requirements for transportable drills
(IEC 62841-3-13:2017 , modified)
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 3-13: Exigences transportable Werkzeuge und Rasen- und
particulières pour les perceuses transportables Gartenmaschinen - Sicherheit - Teil 3-13: Besondere
(IEC 62841-3-13:2017 , modifiée) Anforderungen für transportable Bohrmaschinen
(IEC 62841-3-13:2017 , modifiziert)
This European Standard was approved by CENELEC on 2017-03-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62841-3-13:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62841-3-13:2017
EN 62841-3-13:2017
European foreword
The text of document 116/309/FDIS, future edition 1 of IEC 62841-3-13, prepared by IEC/TC 116
"Safety of motor-operated electric tools" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 62841-3-13:2017.
A draft amendment, which covers common modifications to IEC 62841-3-13 (116/309/FDIS), was
prepared by CLC/TC 116 "Safety of motor-operated electric tools" and approved by CENELEC.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2018-03-13
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2021-03-13
the document have to be withdrawn

This European Standard is divided into four parts:
Part 1: General requirements which are common to most hand-held electric motor operated
tools (for the purpose of this standard referred to simply as tools) which could come
within the scope of this standard;
Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the
requirements given in Part 1 to account for the particular hazards and characteristics
of these specific tools.
This Part 3-13 is to be used in conjunction with EN 62841-1:2015.
This Part 3-13 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as to
convert it into the European Standard: Particular requirements for transportable drills.
Where a particular subclause of Part 1 is not mentioned in this Part 3-13, that subclause applies as far
as relevant. When this standard states "addition", "modification" or "replacement", the relevant text in
Part 1 is to be adapted accordingly
...