EN IEC 60068-3-3:2019
(Main)Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment
Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment
IEC 60068-3-3:2019 applies primarily to electro-technical equipment but its application can be extended to other equipment and to components. In addition, if some type of analysis is always performed when making a seismic qualification, for example for the choice of the representative sample to be tested or for the extension of the seismic qualification from the tested specimen to similar specimens, the verification of the performance of an equipment by analysis or by a combination of testing and analysis can be acceptable but is outside the scope of this document, which is restricted to verification based entirely upon data from dynamic testing. This second edition cancels and replaces the first edition published in 1991. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - the main aim of this revision is to connect the testing level to the seismic activity level of the zone where the equipment could be installed; - a standard shape for the required response spectrum is also given for the general seismic class for which the seismic environment is either not known or is imprecisely known; - Clauses 11 to 15 were renumbered and some adjustments were made as their content is very general and the requirements can be applied both to the general seismic class and to the specific seismic class; - the word “envelope” is replaced with “dominance” and “to envelop” with “to dominate” in order to provide a more precise meaning from a mathematical point of view.
Umgebungseinflüsse - Teil 3-3: Unterstützende Dokumentation und Leitfaden - Seismische Prüfverfahren für Geräte
Essais d’environnement - Partie 3-3: Documentation d’accompagnement et recommandations - Méthodes d’essais sismiques applicables aux matériels
L’IEC 60068-3-3:2019 s’applique principalement au matériel électrotechnique mais son application peut s’étendre à d’autres matériels et composants. Par ailleurs, si un certain type d’analyse est toujours effectuée lors de la réalisation d’une qualification sismique, par exemple pour choisir l’échantillon représentatif à soumettre à essai ou pour étendre la qualification sismique du spécimen soumis à essai à des spécimens similaires, la vérification des performances d’un matériel par l’analyse ou par une combinaison d’essais et d’analyses peut être acceptable mais elle n’entre pas dans le domaine d’application du présent document, qui se limite à la vérification uniquement fondée sur les données d’essais dynamiques. Cette deuxième édition annule et remplace la première édition parue en 1991. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - le principal objectif de la présente révision est d’adapter le niveau d’essai au niveau d’activité sismique de la zone où le matériel est susceptible d’être installé; - une forme normalisée du spectre de réponse spécifié est également fournie pour la classe sismique générale pour laquelle l’environnement sismique n’est pas connu ou l’est de manière imprécise; - les Articles 11 à 15 ont été renumérotés et plusieurs ajustements ont été effectués car le contenu de ces articles est très général et les exigences peuvent s’appliquer aussi bien à la classe sismique générale qu’à la classe sismique spécifique; - le terme «enveloppe» est remplacé par «dominance» et «envelopper» par «dominer» afin d’expliciter ces termes du point de vue mathématique.
Okoljsko preskušanje - 3-3. del: Podporna dokumentacija in navodilo - Seizmične preskusne metode za opremo (IEC 60068-3-3:2019)
Ta dokument se uporablja predvsem za elektrotehnično opremo, vendar ga je mogoče uporabljati tudi za drugo opremo in sestavne dele. Dodatno velja naslednje: če se pri pripravi seizmične kvalifikacije vedno izvaja neka analiza, na primer za izbiro reprezentativnega vzorca za preskus ali za razširitev seizmične kvalifikacije s preskušenega vzorca na podobne vzorce, je lahko sprejemljivo preverjanje delovanja opreme z analizo ali s kombinacijo preskušanja in analize, vendar je to zunaj področja uporabe tega dokumenta, ki je omejen na preverjanje na podlagi podatkov iz dinamičnega preskušanja. Ta dokument obravnava zgolj seizmično preskušanje opreme v polni velikosti, ki se lahko preskuša na vibracijski mizi. Seizmično preskušanje opreme je namenjeno izkazovanju njene zmožnosti za izvajanje potrebnih funkcij med in/ali po tem, ko je bila podvržena obremenitvam in premikom zaradi potresa. Namen tega dokumenta je predstaviti nabor metod za preskušanje, ki jih je, kadar tako določa ustrezna specifikacija, mogoče uporabiti za izkazovanje zmogljivosti opreme, za katero se zahteva seizmično preskušanje, katerega glavni cilj je doseganje kvalifikacije.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60068-3-3:2019
01-december-2019
Nadomešča:
SIST EN 60068-3-3:2001
Okoljsko preskušanje - 3-3. del: Podporna dokumentacija in navodilo - Seizmične
preskusne metode za opremo (IEC 60068-3-3:2019)
Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test
methods for equipment (IEC 60068-3-3:2019)
Umgebungseinflüsse - Teil 3-3: Leitfaden - Seismische Prüfverfahren für Geräte (IEC
60068-3-3:2019)
Essais d'environnement - Partie 3-3: Guide - Méthodes d'essais sismiques applicables
aux matériels (IEC 60068-3-3:2019)
Ta slovenski standard je istoveten z: EN IEC 60068-3-3:2019
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
SIST EN IEC 60068-3-3:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60068-3-3:2019
---------------------- Page: 2 ----------------------
SIST EN IEC 60068-3-3:2019
EUROPEAN STANDARD EN IEC 60068-3-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2019
ICS 19.040 Supersedes EN 60068-3-3:1993 and all of its
amendments and corrigenda (if any)
English Version
Environmental testing - Part 3-3: Supporting documentation and
guidance - Seismic test methods for equipment
(IEC 60068-3-3:2019)
Essais d'environnement - Partie 3-3: Documentation Umgebungseinflüsse - Teil 3-3: Unterstützende
d'accompagnement et recommandations - Méthodes Dokumentation und Leitfaden - Seismische Prüfverfahren
d'essais sismiques applicables aux matériels für Geräte
(IEC 60068-3-3:2019) (IEC 60068-3-3:2019)
This European Standard was approved by CENELEC on 2019-09-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60068-3-3:2019 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60068-3-3:2019
EN IEC 60068-3-3:2019 (E)
European foreword
The text of document 104/835/FDIS, future edition 2 of IEC 60068-3-3, prepared by IEC/TC 104
"Environmental conditions, classification and methods of test" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 60068-3-3:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-06-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-09-27
document have to be withdrawn
This document supersedes EN 60068-3-3:1993 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60068-3-3:2019 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60721-2-6:1990 NOTE Harmonized as HD 478.2.6 S1:1993 (not modified)
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60068-3-3:2019
EN IEC 60068-3-3:2019 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. Fo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.