In-cable control and protection device (IC-CPD) for mode 2 charging of electric road vehicles

IEC 62752:2024 This International Standard applies to in-cable control and protection devices (IC-CPDs) for mode 2 charging of electric road vehicles, hereafter referred to as "IC-CPD", including control and safety functions. This document applies to portable devices performing simultaneously the functions of detection of the residual current, of comparison of the value of this current with the residual operating value and of opening of the protected circuit when the residual current exceeds this value. This second edition cancels and replaces the first edition published in 2016, and Amendment 1:2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Subclause 8.3.1 revised to add requirements for a mandatory control device that detects the temperature of the current carrying parts in the household plug; - Test requirements added in a new Subclause 9.36 for the temperature control device; - Harmonization of EMC requirements with new edition of IEC 61543 and IEC 61851-21-2; - General improvement of test and requirements.

Ladeleitungsintegrierte Steuer- und Schutzeinrichtung für die Ladebetriebsart 2 von Elektro-Straßenfahrzeugen (IC-CPD)

Dispositif de contrôle et de protection intégré au câble (IC-CPD) pour la charge en mode 2 des véhicules électriques

L'IEC 62752:2024 s'applique aux dispositifs de contrôle et de protection intégrés au câble (IC-CPD) pour la charge en mode 2 des véhicules électriques, ci-après dénommés "IC‑CPD", y compris les fonctions de commande et de sécurité. Le présent document s'applique aux dispositifs portables qui remplissent à la fois les fonctions de détection du courant différentiel résiduel, de comparaison de la valeur de ce courant à une valeur de fonctionnement différentiel et d'ouverture du circuit protégé lorsque le courant différentiel résiduel dépasse cette valeur. Cette deuxième édition annule et remplace la première édition parue en 2016 et son Amendement 1:2018. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - révision du 8.3.1 afin d'ajouter des exigences pour un dispositif de commande obligatoire qui détecte la température des parties parcourues par un courant dans la fiche pour usages domestiques; - ajout d'exigences d'essai dans un nouveau paragraphe 9.36 pour le dispositif de commande thermique; - harmonisation des exigences de compatibilité électromagnétique (CEM) par rapport à la nouvelle édition de l'IEC 61543 et à l'IEC 61851‑21‑2; - amélioration générale de l'essai et des exigences associées.

Integrirana zaščita kabla in zaščitna naprava tipa 2 za napajanje električnih cestnih vozil (IC-CPD)

General Information

Status
Not Published
Publication Date
18-Apr-2024
Current Stage
5060 - Voting results sent to TC, SR - Formal Approval
Start Date
19-Jan-2024
Completion Date
19-Jan-2024

Relations

Buy Standard

Draft
prEN IEC 62752:2022
English language
163 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 62752:2022
01-julij-2022
Integrirana zaščita kabla in zaščitna naprava tipa 2 za napajanje električnih cestnih
vozil (IC-CPD)
In-cable control and protection device for mode 2 charging of electric road vehicles (IC-
CPD)
Ladeleitungsintegrierte Steuer- und Schutzeinrichtung für die Ladebetriebsart 2 von
Elektro-Straßenfahrzeugen (IC-CPD)
Appareil de contrôle et de protection intégré au câble pour la charge en mode 2 des
véhicules électriques (IC-CPD)
Ta slovenski standard je istoveten z: prEN IEC 62752:2022
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
43.120 Električna cestna vozila Electric road vehicles
oSIST prEN IEC 62752:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 62752:2022

---------------------- Page: 2 ----------------------
oSIST prEN IEC 62752:2022
23E/1246/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62752 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-05-13 2022-08-05
SUPERSEDES DOCUMENTS:
23E/1233/CD, 23E/1245/CC

IEC SC 23E : CIRCUIT-BREAKERS AND SIMILAR EQUIPMENT FOR HOUSEHOLD USE
SECRETARIAT: SECRETARY:
Italy Mr Giovanni Cassinelli
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

SC 23B,SC 23H,TC 64,TC 69
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)

PROPOSED STABILITY DATE: 2026

NOTE FROM TC/SC OFFICERS:


Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 62752:2022
IEC CDV 62752 © IEC 2022 2 23E/1246/CDV

1 CONTENTS
2 CONTENTS . 2
3 FOREWORD . 10
4 INTRODUCTION . 12
5 1 Scope . 13
6 2 Normative references . 14
7 3 Terms and definitions . 16
8 3.1 Terms and definitions relating to plugs and socket-outlets . 17
9 3.2 Terms and definitions relating to terminals . 18
10 3.3 Terms and definitions relating to residual current functions . 19
11 3.3.1 Terms and definitions relating to currents flowing from live parts to
12 earth . 19
13 3.3.2 Terms and definitions relating to the energization of the residual current
14 function . 20
15 3.3.3 Terms and definitions relating to the operation and to the functions of
16 the IC-CPD . 20
17 3.3.4 Terms and definitions relating to values and ranges of energizing
18 quantities . 22
19 3.3.5 Terms and definitions relating to values and ranges of inf
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.