Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials

1.1 This European Standard specifies the requirements for hand-held or hand-operated electrostatic spraying equipment for non-ignitable liquid coating materials which — do not generate an explosive atmosphere inside the spraying area; — are used to process materials with a conductivity of less than 2 000 µS/cm; — operate with direct current having a sinusoidal ripple of not more than 10 % of the rms value. This European Standard deals with all electrical hazards significant for the electrostatic spraying of non-ignitable liquid coating materials, which could also contain small quantities of added metal particles, if the work is carried out under conditions recommended by the manufacturer. This European Standard specifies the design-related and test requirements for electrostatic spraying equipment of type A-NL according to Table 1 of EN 50348:2010. 1.2 With regard to all other significant hazards relevant for applicators (e.g. ejection of fluids, mechanical strength, electrical - apart from electrostatic - hazards, noise, contact with or inhalation of dangerous substances, ergonomics) the requirements of EN 1953 apply. 1.3 This European Standard also gives details regarding quality assurance systems for electrostatic spraying equipment, see Annex D. 1.4 For electrostatic spraying equipment used in food and pharmaceutical industry, additional requirements may apply. 1.5 This document is not applicable to — electrostatic hand-held spraying equipment for non-ignitable coating materials which are manufactured before the date of its publication as EN, — cleaning of spraying areas, see instruction manual of the spraying booth, — fire prevention and protection [for instance fire hazards due to other sources; see EN 12215, EN 12981], — requirements for machinery for the supply and recirculation of coating material under pressure [see EN 12621]. The requirements of EN 12621 apply for specific requirements for machinery for the supply and recirculation of coating materials under pressure.

Elektrostatische Handsprüheinrichtungen - Sicherheitsanforderungen - Handsprüheinrichtungen für nichtentzündbare Beschichtungsstoffe

Diese Europäische Norm legt Anforderungen für in der Hand gehaltene oder von Hand geführte elektrostatische Sprüheinrichtungen für nichtentzündbare flüssige Beschichtungsstoffe, die: – keine explosionsfähige Atmosphäre innerhalb des Sprühbereiches erzeugen; – zur Verarbeitung von Stoffen mit einer Leitfähigkeit von weniger als 2 000 S/cm verwendet werden; – mit Gleichstrom mit einer sinusförmigen Welligkeit von höchstens 10 % des Effektivwertes betrieben werden. Diese Europäische Norm behandelt alle elektrischen Gefährdungen, die für den elektrostatischen Sprühauf-trag von nichtentzündbaren Beschichtungsstoffen, die auch geringe Mengen an zugesetzten Metallpartikel enthalten können, von Bedeutung sind, wenn unter Bedingungen, die der Hersteller empfiehlt, gearbeitet wird. Diese Europäische Norm legt die Anforderungen für Konstruktion und Prüfung von elektrostatischen Sprüh-einrichtungen des Typ A-NL nach EN 50348:2010, Tabelle 1 fest. 1.2 Bezüglich aller anderen für Auftragseinrichtungen signifikanten Gefährdungen (z. B. Herausspritzen von Flüssigkeiten, mechanische Festigkeit, elektrische – ausgenommen elektrostatische – Gefährdungen, Lärm, Kontakt mit oder Einatmen von schädlichen Stoffen, Ergonomie) gelten die Anforderungen von EN 1953. 1.3 Diese Europäische Norm enthält auch Einzelheiten zu Qualitätssicherungssystemen für elektro-statische Sprüheinrichtungen, siehe Anhang D. 1.4 Für elektrostatische Sprüheinrichtungen, die in der Lebensmittel- und Pharmaindustrie eingesetzt werden, können zusätzliche Anforderungen gelten. 1.5 Dieses Dokument ist nicht anwendbar auf: – elektrostatische Handsprüheinrichtungen für nichtentzündbare Beschichtungsstoffe, die vor dem Erscheinen dieses Dokuments als Europäische Norm, hergestellt wurden; – die Reinigung von Sprühbereichen, siehe Betriebsanleitung der Lackierkabine; – den Brandschutz [z. B. Brandgefahren durch andere Quellen, siehe EN 12215, EN 12981]; – Anforderungen an Förder und Umlaufanlagen für Beschichtungsstoffe unter Druck [siehe EN 12621]. Für Förder- und Umlaufanlagen für Beschichtungsstoffe unter Druck gelten die spezifischen Anforderungen von EN 12621.

Équipement manuel de projection électrostatique - Exigences de sécurité - Équipement manuel de projection de revêtement ininflammable

1.1 La présente Norme européenne spécifie les exigences relatives aux équipements portatifs ou manuels de projection électrostatique de produits liquides de revêtement ininflammables qui - ne génèrent pas d'atmosphère explosive au sein de l'emplacement de projection; - sont utilisés pour traiter les matériaux ayant une conductivité inférieure à 2 000 µS/cm; - fonctionnent en courant continu avec une ondulation sinusoïdale inférieure ou égale à 10 % de la valeur efficace. La présente Norme européenne traite de tous les dangers électriques importants concernant la projection électrostatique de produits liquides de revêtement ininflammables pouvant également comporter de petites quantités de particules de métal supplémentaires, si la tâche est réalisée dans les conditions recommandées par le constructeur. La présente Norme européenne spécifie les exigences relatives à la conception et les exigences d'essai des équipements de projection électrostatique de type A-NL, conformément au Tableau 1 de l'EN 50348:2010. 1.2 Les exigences de l'EN 1953 s'appliquent pour tous les autres dangers significatifs concernant les applicateurs (par exemple, éjection de fluides, résistance mécanique, dangers électriques (à l’exception des dangers électrostatiques), bruit, contact avec ou inhalation des substances dangereuses, ergonomie). 1.3 La présente Norme européenne fournit également des informations détaillées concernant les systèmes d'assurance qualité des équipements de projection électrostatique, voir l'Annexe D. 1.4 Pour les équipements de projection électrostatique utilisés dans l'industrie alimentaire et dans l'industrie pharmaceutique, des exigences supplémentaires peuvent s'appliquer. 1.5 Le présent document ne s'applique pas - aux équipements portatifs de projection électrostatique de revêtement ininflammable fabriqués avant sa date de publication comme EN, - au nettoyage des emplacements de projection, voir le manuel d'instructions de la cabine de projection, - à la prévention et la protection contre le feu [par exemple dangers d'incendie dus à d’autres sources; voir l'EN 12215 et l'EN 12981], - aux exigences relatives aux machines d'alimentation et de circulation de produits de revêtement sous pression [voir l'EN 12621]. Les exigences de l'EN 12621 s'appliquent aux exigences spécifiques applicables aux machines d'alimentation et de circulation de produits de revêtement sous pression.

Oprema za ročno elektrostatično brizganje - Varnostne zahteve - Ročna oprema za brizganje nevnetljivih premazov

1.1 Ta evropski standard določa zahteve za ročno opremo za elektrostatično brizganje nevnetljivih premazov, ki
– ne ustvarjajo eksplozivne atmosfere na območju brizganja;
– se uporabljajo za obdelavo materialov s prevodnostjo manj kot 2000 μS/cm;
– delujejo z enosmernim tokom s sinusoidnim valovanjem, ki ne presega 10 % efektivne vrednosti.
Ta evropski standard zajema vse električne nevarnosti, ki se pojavijo pri elektrostatičnem brizganju nevnetljivih tekočih materialov, ki lahko vsebujejo tudi manjše količine dodanih kovinskih delcev, če se delo izvaja pod pogoji, ki jih priporoča proizvajalec.
Ta evropski standard določa zahteve, povezane z zasnovo in preskušanjem, za elektrostatično opremo za brizganje vrste A–NL v skladu s tabelo 1 standarda EN 50348:2010.
1.2. Vse ostale večje nevarnosti, povezane z opremo za nanašanje (npr. nanašanje tekočin, mehanska trdnost, nevarnosti zaradi elektrike (razen elektrostatičnih nevarnosti), hrup, stik z nevarnimi snovmi ali njihovo vdihavanje, ergonomika), so zajete v standardu EN 1953.
1.3 Ta evropski standard navaja tudi podrobnosti glede sistemov zagotavljanja kakovosti za opremo za elektrostatično brizganje.
1.4 Za opremo za elektrostatično brizganje, ki se uporablja v živilski in farmacevtski industriji, lahko veljajo dodatne zahteve.

General Information

Status
Published
Publication Date
26-Jul-2018
Withdrawal Date
26-Jul-2021
Current Stage
6060 - Document made available - Publishing
Start Date
27-Jul-2018
Due Date
20-Mar-2018
Completion Date
27-Jul-2018

Relations

Buy Standard

Standard
EN 50059:2018 - BARVE
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 50059:2016 - BARVE
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektrostatische Handsprüheinrichtungen - Sicherheitsanforderungen - Handsprüheinrichtungen für nichtentzündbare BeschichtungsstoffeEquipement manuel de projection électrostatique - Exigences de sécurité - Equipement manuel de projection de revêtement ininflammableElectrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials87.100Oprema za nanašanje premazovPaint coating equipmentICS:Ta slovenski standard je istoveten z:EN 50059:2018SIST EN 50059:2018en01-oktober-2018SIST EN 50059:2018SLOVENSKI
STANDARDSIST EN 50059:20011DGRPHãþD



SIST EN 50059:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 50059
July 2018 ICS 87.100
Supersedes
EN 50059:1990
English Version
Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials
Équipement manuel de projection électrostatique - Exigences de sécurité - Équipement manuel de projection de revêtement ininflammable
Elektrostatische Handsprüheinrichtungen - Sicherheitsanforderungen - Handsprüheinrichtungen für nichtentzündbare Beschichtungsstoffe This European Standard was approved by CENELEC on 2018-01-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50059:2018 E SIST EN 50059:2018



EN 50059:2018 (E) 2 Contents Page European foreword . 4 0 Introduction . 6 1 Scope . 8 2 Normative references . 8 3 Terms, definitions and symbols . 9 3.1 Terms and definitions . 9 3.2 Symbols . 11 4 Requirements for hand-held spraying equipment for non-ignitable liquid coating materials . 12 4.1 General requirements . 12 4.2 Requirements for the accessories . 14 5 Tests . 15 5.1 General . 15 5.2 General tests . 15 5.2.1 Test of earth connections . 15 5.2.2 Resistance test .
...

SLOVENSKI STANDARD
oSIST prEN 50059:2016
01-julij-2016
2SUHPD]DURþQRHOHNWURVWDWLþQREUL]JDQMH9DUQRVWQH]DKWHYH5RþQDRSUHPD]D
EUL]JDQMHQHYQHWOMLYLKSUHPD]RY
Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying
equipment for non-ignitable coating materials
Elektrostatische Handsprüheinrichtungen - Sicherheitsanforderungen -
Handsprüheinrichtungen für nichtentzündbare Beschichtungsstoffe
Equipement manuel de projection électrostatique - Exigences de sécurité - Equipement
manuel de projection de revêtement ininflammable
Ta slovenski standard je istoveten z: prEN 50059
ICS:
87.100 Oprema za nanašanje Paint coating equipment
premazov
oSIST prEN 50059:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50059:2016

---------------------- Page: 2 ----------------------
oSIST prEN 50059:2016

EUROPEAN STANDARD DRAFT
prEN 50059
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2016
ICS 87.100 Will supersede EN 50059:1990
English Version
Electrostatic hand-held spraying equipment - Safety
requirements - Hand-held spraying equipment for non-ignitable
coating materials
Equipement manuel de projection électrostatique - Elektrostatische Handsprüheinrichtungen -
Exigences de sécurité - Equipement manuel de projection Sicherheitsanforderungen - Handsprüheinrichtungen für
de revêtement ininflammable nichtentzündbare Beschichtungsstoffe
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2016-08-05.

It has been drawn up by CLC/TC 204.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 58819 Ref. No. prEN 50059 E

---------------------- Page: 3 ----------------------
oSIST prEN 50059:2016
prEN 50059:2016 (E)
1 Contents
2 European foreword . 4
3 0 Introduction . 5
4 0.1 Process . 5
5 0.2 Fire hazards . 5
6 0.3 Electric hazards . 5
7 1 Scope . 7
8 2 Normative references . 7
9 3 Terms, definitions and symbols . 8
10 3.1 Terms and definitions . 8
11 3.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.