Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments

IEC 63044-5-3:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23. This document specifies EMC requirements for HBES/BACS to be installed in industrial environments, according to the definition given in IEC 61000-6-2. NOTE Industrial environment covers the office spaces that may be present in industrial premises. Industrial automation systems are outside the scope. This document is applicable (but not limited) to  
operator stations and other human–system interface devices,
devices for management functions,
control devices, automation stations and application-specific controllers,
field devices and their interfaces,
cabling and interconnection of devices,  used within a dedicated HBES/BACS network. This publication is to be read in conjunction with IEC 63044-5-1:2017.

Allgemeine Anforderungen an die Elektrische Systemtechnik für Heim und Gebäude (ESHG) und an Systeme der Gebäudeautomation (GA) - Teil 5–3: EMV-Anforderungen an ESHG/GA für den Gebrauch im Industriebereich

Systèmes électroniques pour les foyers domestiques et les bâtiments (HBES) et systèmes de gestion technique du bâtiment (SGTB) - Partie 5-3: Exigences CEM relatives aux HBES/SGTB destinés à être utilisés en environnement industriel

L'IEC 63044-5-3:2017 est une norme de famille de produits qui établit le niveau minimal de performance CEM pour le réseau HBES/SGTB outre les normes CEM de produits applicables aux dispositifs HBES/SGTB. Elle s'applique également aux dispositifs utilisés dans un réseau HBES/SGTB pour lequel il n'existe aucune norme CEM de produit HBES/SGTB spécifique. De plus, elle spécifie des exigences CEM relatives à l'interface des équipements destinés à être connectés à un réseau HBES/SGTB. Elle ne s'applique pas aux interfaces avec d'autres réseaux. NOTE Un réseau TIC dédié traité par le CISPR 22 et 23 constitue un exemple d'autres réseaux. Le présent document spécifie des exigences CEM relatives aux systèmes HBES/SGTB à installer dans un environnement industriel selon la définition de l'IEC 61000-6-2. NOTE L'expression "environnement industriel" couvre les locaux pour bureaux qui peuvent être présents dans des bâtiments industriels. Les systèmes d'automatisation industrielle ne relèvent pas du domaine d'application du présent document. Le présent document est applicable (sans toutefois s'y limiter) aux  
postes d’opérateur et autres dispositifs d’interface homme–système,
dispositifs pour des fonctions de gestion,
dispositifs de commande, postes d’automatisation et contrôleurs spécifiques à une application,
dispositifs de terrain et leurs interfaces,
câblage et à l’interconnexion des dispositifs,  utilisés dans un réseau HBES/SGTB dédié. Cette publication doit être lue conjointement avec l’IEC 63044-5-1:2017.

Splošne zahteve za stanovanjske in stavbne elektronske sisteme (HBES) in sisteme za avtomatizacijo in krmiljenje stavb (BACS) - 5-3. del: Zahteve EMC za HBES/BACS, ki se uporabljajo v industrijskih okoljih

Ta dokument določa zahteve EMC za HBES/BACS za namestitev v industrijskih okoljih v skladu z definicijo iz standarda IEC 61000-6-2.

General Information

Status
Published
Publication Date
31-Oct-2019
Current Stage
6060 - Document made available - Publishing
Start Date
01-Nov-2019
Completion Date
01-Nov-2019

Relations

Buy Standard

Standard
EN IEC 63044-5-3:2019
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 63044-5-3:2019
01-december-2019
Nadomešča:
SIST EN 50491-5-3:2011
Splošne zahteve za stanovanjske in stavbne elektronske sisteme (HBES) in
sisteme za avtomatizacijo in krmiljenje stavb (BACS) - 5-3. del: Zahteve EMC za
HBES/BACS, ki se uporabljajo v industrijskih okoljih
General requirements for Home and Building Electronic Systems (HBES) and Building
Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS
used in indus try environment
Ta slovenski standard je istoveten z: EN IEC 63044-5-3:2019
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
SIST EN IEC 63044-5-3:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 63044-5-3:2019

---------------------- Page: 2 ----------------------
SIST EN IEC 63044-5-3:2019


EUROPEAN STANDARD EN IEC 63044-5-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2019
ICS 29.120.99; 29.120.01 Supersedes EN 50491-5-3:2010 and all of its
amendments and corrigenda (if any)
English Version
Home and building electronic systems (HBES) and building
automation and control systems (BACS) - Part 5-3: EMC
requirements for HBES/BACS used in industrial environments
(IEC 63044-5-3:2017)
Systèmes électroniques pour les foyers domestiques et les Allgemeine Anforderungen an die Elektrische
bâtiments (HBES) et systèmes de gestion technique du Systemtechnik für Heim und Gebäude (ESHG) und an
bâtiment (SGTB) - Partie 5-3: Exigences CEM relatives aux Systeme der Gebäudeautomation (GA) - Teil 5–3: EMV-
HBES/SGTB destinés à être utilisés en environnement Anforderungen an ESHG/GA für den Gebrauch im
industriel Industriebereich
(IEC 63044-5-3:2017) (IEC 63044-5-3:2017)
This European Standard was approved by CENELEC on 2017-03-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 63044-5-3:2019 E

---------------------- Page: 3 ----------------------
SIST EN IEC 63044-5-3:2019
EN IEC 63044-5-3:2019 (E)
European foreword
The text of document 23/738/CDV, future edition 1 of IEC 63044-5-3, prepared by IEC/TC 23
"Electrical accessories" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN IEC 63044-5-3:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-05-01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-11-01
document have to be withdrawn
This document supersedes EN 50491-5-3:2010 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association.
.
Endorsement notice
The text of the International Standard IEC 63044-5-3:2017 was approved by CENELEC as a
European Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST EN IEC 63044-5-3:2019
EN IEC 63044-5-3:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding Euro
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.