Energy Consumption of Vending Machines

This European Standard defines methods for the measurement of energy consumption of vending machines, whether or not fitted with refrigerating appliances. The European Standard applies (but is not limited) to the following categories of machine types: For verification purposes all the tests specified need to be applied to a single unit. The tests may also be made individually for the study of a particular characteristic. This European Standard does not deal with any characteristics of machine design other than energy consumption.

Energieverbrauch von Verkaufsautomaten

Consommation d'énergie des distributeurs automatiques

Poraba energije prodajnih avtomatov

Ta evropski standard določa metode za merjenje porabe energije prodajnih avtomatov z nameščenim hladilnim aparatom ali brez njega. Ta evropski standard se uporablja (med drugim) za naslednje kategorije tipov strojev:
Za namene overjanja je treba za posamezno enoto opraviti vse predpisane preskuse. Za proučevanje določene značilnosti se lahko preskusi opravijo tudi ločeno. Ta evropski standard ne obravnava nobene druge značilnosti strojev, razen porabe energije.

General Information

Status
Withdrawn
Publication Date
15-Oct-2015
Withdrawal Date
06-Sep-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
30-Nov-2021
Completion Date
30-Nov-2021

Relations

Effective Date
14-Jun-2016

Buy Standard

Standard
EN 50597:2015
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Poraba energije prodajnih avtomatovEnergieverbrauch von VerkaufsautomatenEnergy consumption of vending machines55.230Razdelilni in prodajni avtomatiDistribution and vending machines27.010Prenos energije in toplote na splošnoEnergy and heat transfer engineering in generalICS:Ta slovenski standard je istoveten z:EN 50597:2015SIST EN 50597:2015en01-december-2015SIST EN 50597:2015SLOVENSKI
STANDARD



SIST EN 50597:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 50597
October 2015 ICS 27.010; 55.230; 97.040.30 English Version
Energy Consumption of Vending Machines
Consommation d'énergie des distributeurs automatiques
Energieverbrauch von Verkaufsautomaten This European Standard was approved by CENELEC on 2015-09-07. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50597:2015 ESIST EN 50597:2015



EN 50597:2015 (E) 2 Contents Page European foreword .4 Introduction .5 1 Scope .6 2 Normative references .6 3 Terms and definitions .6 4 General requirements .9 4.1 Applicability .9 4.2 Test room .9 4.3 Instruments, measuring equipment and measuring accuracy . 10 4.4 Power supply . 10 5 Conditions for the tests . 10 5.1 General . 10 5.2 Equipment location for test . 10 5.3 Energy consumption and recording . 11 5.4 Product Temperature sensors . 11 5.5 Product loading for test . 11 5.6 Product storage temperatures . 11 5.7 Stabilization . 12 6 Energy consumption measurement .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.