EN 62321-3-1:2014

Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry

IEC 62321-3-1:2013 describes the screening analysis of five substances, specifically lead (Pb), mercury (Hg), cadmium (Cd), total chromium (Cr) and total bromine (Br) in uniform materials found in electrotechnical products, using the analytical technique of X-ray fluorescence (XRF) spectrometry.

Verfahren zur Bestimmung von bestimmten Substanzen in Produkten der Elektrotechnik - Teil 3-1: Screening - Blei, Quecksilber, Cadmium, Gesamtchrom und Gesamtbrom durch Röntgenfluoreszenz-Spektrometrie

Détermination de certaines substances dans les produits électrotechniques - Partie 3-1: Méthodes d'essai - Plomb, du mercure, du cadmium, du chrome total et du brome total par la spectrométrie par fluorescence X

La CEI 62321-3-1:2013 décrit des procédures d'analyse de détection de cinq substances, spécifiquement le plomb (Pb), le mercure (Hg), le cadmium (Cd), le chrome total (Cr) et le brome total (Br) dans des matériaux uniformes utilisés dans les produits électrotechniques en utilisant la technique d'analyse de spectrométrie par fluorescence X (XRF).

Določevanje posameznih snovi v elektrotehničnih izdelkih - 3-1. del: Presejanje elektrotehničnih izdelkov glede svinca, živega srebra, kadmija, celotnega kroma in celotnega broma z rentgensko fluorescenčno spektrometrijo (IEC 62321-3-1:2013)

Standard EN-IEC 62321-3-1opisuje presejalno analizo petih snovi, zlasti svinca (Pb), živega srebra (Hg), kadmija (Cd), skupnega kroma (Cr) in skupnega broma (Br) v homogenih materialih, ki se nahajajo v elektrotehničnih izdelkih, z rentgensko fluorescenčno spektrometrijo (XRF). Velja za polimere, kovine in keramične materiale. Preskusna metoda se lahko uporabi za surovine, posamezne materiale, pridobljene iz proizvodov, in »homogenizirane« mešanice več kot enega materiala. Presejanje vzorca se izvede z uporabo katere koli vrste spektrometra za rentgensko fluorescenčno spektrometrijo, če ima zmogljivostne lastnosti, navedene v tej preskusni metodi. Vse vrste spektrometrov za rentgensko fluorescenčno spektrometrijo niso primerne za vzorce vseh velikosti in oblik. Treba je paziti, da za izbrano nalogo izberete ustrezno zasnovan spektrometer.

General Information

• Status: Published
• Publication Date: 24-Apr-2014
• Withdrawal Date: 14-Nov-2016
• ICS: 13.020 - Environmental protection
• ICS: 43.040.10 - Electrical and electronic equipment
• Technical Committee: CLC/TC 111X - Environment
• Drafting Committee: IEC/TC 111 - Environmental standardization for electrical and electronic products and systems
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 25-Apr-2014
• Completion Date: 25-Apr-2014
• Directive: 2002/95/EC - Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
• Directive: 2011/65/EU - DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
• Ref Project: SIST EN 62321-3-1:2014 - Determination of certain substances in electrotechnical products - Part 3-1: Screening test methods - Screening of electrotechnical products for lead, mercury, cadmium, total chromium and total bromine using X-ray fluorescence spectrometry

Relations

• Replaces: EN 62321:2009 - Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62321-3-1:2014
01-junij-2014
1DGRPHãþD
SIST EN 62321:2009
'RORþHYDQMHSRVDPH]QLKVQRYLYHOHNWURWHKQLþQLKL]GHONLKGHO3UHVHMDQMH
HOHNWURWHKQLþQLKL]GHONRYJOHGHVYLQFDåLYHJDVUHEUDNDGPLMDFHORWQHJDNURPDLQ
FHORWQHJDEURPD]UHQWJHQVNRIOXRUHVFHQþQRVSHNWURPHWULMR,(&
Determination of certain substances in electrotechnical products - Part 3-1: Screening
test methods - Screening of electrotechnical products for lead, mercury, cadmium, total
chromium and total bromine using X-ray fluorescence spectrometry
Verfahren zur Bestimmung von bestimmten Substanzen in Produkten der Elektrotechnik
- Teil 3-1: Ermittlung von Blei (Pb), Quecksilber (Hg), Cadmium (Cd), Gesamtchrom (Cr)
und Brom (Br) durch Röntgenfluoreszenz-Spektrometrie in elektrotechnischen Produkten
Détermination de certaines substances dans les produits électrotechniques -- Partie 3-1:
Détection du plomb, du mercure, du cadmium, du chrome total et du brome total dans
les produits électrotechniques par spectrométrie par fluorescence X
Ta slovenski standard je istoveten z: EN 62321-3-1:2014
ICS:
29.020 Elektrotehnika na splošno Electrical engineering in
general
31.020 Elektronske komponente na Electronic components in
splošno general
SIST EN 62321-3-1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62321-3-1:2014

---------------------- Page: 2 ----------------------

SIST EN 62321-3-1:2014

EUROPEAN STANDARD
EN 62321-3-1

NORME EUROPÉENNE
April 2014
EUROPÄISCHE NORM


ICS 13.020; 43.040.10 Supersedes EN 62321:2009 (partially)


English version


Determination of certain substances in electrotechnical products -
Part 3-1: Screening -
Lead, mercury, cadmium, total chromium and total bromine by X-ray
fluorescence spectrometry
(IEC 62321-3-1:2013)


Détermination de certaines substances Verfahren zur Bestimmung von
dans les produits électrotechniques - bestimmten Substanzen in Produkten der
Partie 3-1: Méthodes d'essai - Elektrotechnik -
Plomb, du mercure, du cadmium, du Teil 3-1: Screening -
chrome total et du brome total par la Blei, Quecksilber, Cadmium,
spectrométrie par fluorescence X Gesamtchrom und Gesamtbrom durch
(CEI 62321-3-1:2013) Röntgenfluoreszenz-Spektrometrie
(IEC 62321-3-1:2013)



This European Standard was approved by CENELEC on 2013-11-15. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62321-3-1:2014 E

---------------------- Page: 3 ----------------------

SIST EN 62321-3-1:2014
EN 62321-3-1:2014 - 2 -
Foreword
The text of document 111/298/FDIS, future edition 1 of IEC 62321-3-1, prepared by IEC/TC 111
"Environmental standardization for electrical and electronic products and systems" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62321-3-1:2014.
The following dates are fixed:
(dop) 2014-10-25
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-11-15
standards conflicting with the

document have to be withdrawn

EN 62321-3-1:2014 is a partial replacement of EN 62321:2009, forming a structural revision and
generally replacing Clauses 6 and Annex D.
Future parts in the EN 62321 series will gradually replace the corresponding clauses in EN 62321:2009.
Until such time as all parts are publ
...