EN IEC 61300-3-21:2019
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time
IEC 61300-3-21:2019 is available as IEC 61300-3-21:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61300-3-21:2019 describes a method to measure the switching time and related performance parameters of a fibre optic spatial switch when the actuation energy is applied or removed to change the state of the switch. This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - changes to remove redundant overlap with IEC 60876-1; - clarifications to definitions and diagrams; - generalization of the detection apparatus beyond an oscilloscope. Keywords: switching time, performance parameters of a fibre optic spatial switch, actuation energy
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-21: Untersuchungen und Messungen - Schaltzeit
Dispositifs d’interconnexion et composants passifs fibroniques - Procedures fondamentales d'essais et de mesures - Partie 3-21: Examens et mesures - Temps de commutation
IEC 61300-3-21:2019 est disponible sous forme de IEC 61300-3-21:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.IEC 61300-3-21:2019 décrit une méthode en vue de mesurer le temps de commutation et les paramètres de performances associés d'un commutateur spatial fibronique, lorsque l'énergie d'activation est appliquée ou retirée pour modifier l'état du commutateur. Cette troisième édition annule et remplace la deuxième édition parue en 2014 dont elle constitue une révision technique. La présente édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - modifications pour éviter les redondances avec l'IEC 60876-1; - clarifications des définitions et des schémas; - généralisation des appareils de détection autres que les oscilloscopes. Mots-clés : temps de commutation, paramètres de performances associés d'un commutateur spatial fibronique, énergie d'activation
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 3-21. del: Preiskave in meritve - Preklopni čas (IEC 61300-3-21:2019)
Ta dokument opisuje metodo za merjenje preklopnega časa in povezanih parametrov zmogljivosti optičnega prostorskega stikala ob vklopu ali izklopu napajanja za spremembo stanja stikala.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61300-3-21:2020
01-januar-2020
Nadomešča:
SIST EN 61300-3-21:2016
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 3-21. del: Preiskave in meritve - Preklopni čas (IEC 61300-3-21:2019)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-21: Examinations and measurements - Switching time
(IEC 61300-3-21:2019)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 3-21: Untersuchungen und Messungen - Schaltzeit (IEC 61300-3-
21:2019)
Dispositifs d’interconnexion et composants passifs à fibres optiques - Procédures
fondamentales d'essais et de mesures - Partie 3-21: Examens et mesures - Temps de
commutation (IEC 61300-3-21:2019)
Ta slovenski standard je istoveten z: EN IEC 61300-3-21:2019
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61300-3-21:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61300-3-21:2020
---------------------- Page: 2 ----------------------
SIST EN IEC 61300-3-21:2020
EUROPEAN STANDARD EN IEC 61300-3-21
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2019
ICS 33.180.20 Supersedes EN 61300-3-21:2015 and all of its
amendments and corrigenda (if any)
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 3-21:
Examinations and measurements - Switching time
(IEC 61300-3-21:2019)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Procedures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-
mesures - Partie 3-21: Examens et mesures - Temps de 21: Untersuchungen und Messungen - Schaltzeit
commutation (IEC 61300-3-21:2019)
(IEC 61300-3-21:2019)
This European Standard was approved by CENELEC on 2019-10-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61300-3-21:2019 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61300-3-21:2020
EN IEC 61300-3-21:2019 (E)
European foreword
The text of document 86B/4218/FDIS, future edition 3 of IEC 61300-3-21, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61300-3-21:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-07-25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2020-10-25
document have to be withdrawn
This document supersedes EN 61300-3-21:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61300-3-21:2019 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60876-1:2014 NOTE Harmonized as EN 60876-1:2014 (not modified)
2
-----------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.