Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods

IEC 62282-3-200:2015 covers operational and environmental aspects of the stationary fuel cell power systems performance. The test methods apply as follows: - power output under specified operating and transient conditions; - electrical and heat recovery efficiency under specified operating conditions; - environmental characteristics; - for example, exhaust gas emissions, noise, etc. under specified operating and transient conditions. This new edition includes the following significant technical changes with respect to the previous edition: a stabilization zone of +- 10 % for thermal output of 100 % response time is provided instead of the tests for thermal output of 90 % response time, while the tests for electric output of 90 % response time remain as an option; the calculations for the ramp rate in kW/s are deleted and only the calculations for the response time (s) remain.

Brennstoffzellentechnologien - Teil 3-200: Stationäre Brennstoffzellen-Energiesysteme - Leistungskennwerteprüfverfahren

Technologies des piles à combustible - Partie 3-200: Systèmes à piles à combustible stationnaires - Méthodes d'essai des performances

L'IEC 62282-3-200:2015 couvre les aspects de fonctionnement et d'environnement des performances des systèmes à piles à combustible stationnaires. Les méthodes d'essai s'appliquent comme suit: - puissance de sortie dans des conditions de fonctionnement spécifiées y compris les conditions transitoires; - rendements de l'énergie électrique et de l'énergie thermique récupérable dans des conditions de fonctionnement spécifiées; - caractéristiques d'environnement, par exemple, émissions de gaz d'échappement, bruit, etc., dans des conditions de fonctionnement spécifiées y compris les conditions transitoires. Cette nouvelle édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: une zone de stabilisation de +- 10 % pour une sortie thermique d'un temps de réponse à 100 % est fournie en lieu et place des essais de sortie thermique d'un temps de réponse à 90 %, alors que les essais de sortie électrique d'un temps de réponse à 90 % restent facultatifs; les calculs relatifs au taux de variation en kW/s sont supprimés et seuls les calculs relatifs au(x) temps de réponse sont maintenus.

Tehnologije gorivnih celic - 3-200. del: Nepremični elektroenergetski sistemi z gorivnimi celicami - Preskusne metode zmogljivosti (IEC 62282-3-200:2015)

Ta del standarda IEC 62282 zajema obratovalne in okoljske vidike zmogljivosti nepremičnih elektroenergetskih sistemov z gorivnimi celicami. Preskusne metode se uporabljajo, kot sledi:
– izhodna moč pod navedenimi obratovalnimi in prehodnimi pogoji;
– učinkovitost ponovnega pridobivanja električne in toplotne energije pod navedenimi obratovalnimi pogoji;
– okoljske značilnosti, na primer emisije izpustov, hrupa, itn. pod navedenimi obratovalnimi in prehodnimi pogoji.
Ta standard ne zajema elektromagnetne združljivosti (EMC).
Ta standard se ne uporablja za majhne nepremične elektroenergetske sisteme z gorivnimi celicami z izhodno močjo električne energije, manjšo od 10 kW, ki so obravnavani v standardu IEC 62282-3-201.
Elektroenergetski sistemi z gorivnimi celicami imajo lahko različne podsisteme, kar je odvisno od tipov gorivnih celic in njihove uporabe, ter različne pretoke materiala in energije v sisteme ter iz njih.
Vendar za vrednotenje elektroenergetskega sistema z gorivnimi celicami sta določena diagram in meja splošnega sistema (glej sliko 1).
Za določanje sistemske meje elektroenergetskega sistema z gorivnimi celicami se upoštevajo naslednji pogoji:
– v sistemsko mejo so vključeni vsi sistemi za energetsko predelavo;
– vse vrste naprav za shranjevanje električne energije so zunaj sistemske meje;
– izračun vrednosti segrevanja vhodnega goriva (kot so zemeljski plin, propan in čisti vodik v plinastem stanju) temelji na pogojih goriva na meji elektroenergetskega sistema z gorivnimi celicami.

General Information

Status
Published
Publication Date
10-Mar-2016
Withdrawal Date
23-Dec-2018
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
11-Mar-2016
Completion Date
11-Mar-2016

Relations

Buy Standard

Standard
EN 62282-3-200:2016
English language
77 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62282-3-200:2016
01-julij-2016
1DGRPHãþD
SIST EN 62282-3-200:2012
7HKQRORJLMHJRULYQLKFHOLFGHO1HSUHPLþQLHOHNWURHQHUJHWVNLVLVWHPL]
JRULYQLPLFHOLFDPL3UHVNXVQHPHWRGH]PRJOMLYRVWL ,(&
Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test
methods (IEC 62282-3-200:2015)
Ta slovenski standard je istoveten z: EN 62282-3-200:2016
ICS:
27.070 Gorilne celice Fuel cells
SIST EN 62282-3-200:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62282-3-200:2016

---------------------- Page: 2 ----------------------

SIST EN 62282-3-200:2016


EUROPEAN STANDARD EN 62282-3-200

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2016
ICS 27.070 Supersedes EN 62282-3-200:2012
English Version
Fuel cell technologies - Part 3-200: Stationary fuel cell power
systems - Performance test methods
(IEC 62282-3-200:2015)
Technologies des piles à combustible - Partie 3-200: Brennstoffzellentechnologien - Teil 3-200: Stationäre
Systèmes à piles à combustible stationnaires - Méthodes Brennstoffzellen-Energiesysteme -
d'essai des performances Leistungskennwerteprüfverfahren
(IEC 62282-3-200:2015) (IEC 62282-3-200:2015)
This European Standard was approved by CENELEC on 2015-12-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62282-3-200:2016 E

---------------------- Page: 3 ----------------------

SIST EN 62282-3-200:2016
EN 62282-3-200:2016
European foreword
The text of document 105/547/FDIS, future edition 2 of IEC 62282-3-200, prepared by IEC TC 105 "Fuel
cell technologies" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62282-3-200:2016.
The following dates are fixed:
• latest date by which the document has (dop) 2016-09-24
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-12-24
standards conflicting with the
document have to be withdrawn

This document supersedes EN 62282-3-200:2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62282-3-200:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

ISO 9000 NOTE Harmonized as EN ISO 9000.
ISO 6976:1995 NOTE Harmonized as EN ISO 6976:2005.

2

---------------------- Page: 4 ----------------------

SIST EN 62282-3-200:2016
 EN 62282-3-200:2016

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
ww
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.