EN 61300-3-4:2013

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation

IEC 61300-3-4:2012 describes the various methods available to measure the attenuation of optical components. It is not, however, applicable to dense wavelength division multiplexing (DWDM) components, for which IEC 61300-3-29 should be used. This third edition cancels and replaces the second edition published in 2001. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - revision of source conditions, launch conditions and power meter parameters; - addition of safety recommendations; - removal of launch condition details for multimode fibres, now referenced in 61300-1. Key words: measure the attenuation of optical components

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-4: Untersuchungen und Messungen - Dämpfung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-4: Examens et mesures - Affaiblissement

La CEI 61300-3-4:2012 décrit les différentes méthodes disponibles permettant de mesurer l'affaiblissement des composants optiques. Toutefois, elle n'est pas applicable aux composants DWDM (Dense wavelength division multiplexing) pour lesquels il convient d'utiliser la CEI 61300-3-29. Cette troisième édition annule et remplace la deuxième édition publiée en 2001. Elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - la révision des conditions de la source, des conditions d'injection et des paramètres de l'appareil de mesure de la puissance; - l'ajout de recommandations de sécurité; - la suppression des détails concernant les conditions d'injection relatives aux fibres multimodales, dorénavant référencés dans la CEI 61300-1. Mots clés: méthodes disponibles permettant de mesurer l'affaiblissement des composants optiques

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 3-4. del: Preiskave in meritve - Slabljenje

Ta del standarda IEC 61300 opisuje različne metode, ki so na voljo za merjenje zmanjšanja optičnih komponent. Vendar se ne uporablja za komponente za zgoščenovalovno dolžinsko multipleksiranje (DWDM), za katere se uporablja IEC 61300-3-29.

General Information

• Status: Published
• Publication Date: 27-Jun-2013
• Withdrawal Date: 15-Jan-2014
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 28-Jun-2013
• Completion Date: 28-Jun-2013
• Ref Project: SIST EN 61300-3-4:2013 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation

Relations

• Replaces: EN 61300-3-4:2001 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
• Effective Date: 29-Jan-2023
• Replaced By: EN IEC 61300-3-4:2023 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
• Effective Date: 16-Feb-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-3-4:2013
01-oktober-2013
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXVQLLQPHULOQL
SRVWRSNLGHO3UHLVNDYHLQPHULWYH6ODEOMHQMH
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-4: Examinations and measurements - Attenuation
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 3-4: Untersuchungen und Messungen - Dämpfung
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 3-4: Examens et mesures -
Affaiblissement
Ta slovenski standard je istoveten z: EN 61300-3-4:2013
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-3-4:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-3-4:2013

---------------------- Page: 2 ----------------------

SIST EN 61300-3-4:2013

EUROPEAN STANDARD
EN 61300-3-4

NORME EUROPÉENNE
June 2013
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-3-4:2001


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 3-4: Examinations and measurements -
Attenuation
(IEC 61300-3-4:2012)


Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Méthodes fondamentales d'essais et de Bauteile -
mesures - Grundlegende Prüf- und Messverfahren -
Partie 3-4: Examens et mesures - Teil 3-4: Untersuchungen und Messungen
Affaiblissement -
(CEI 61300-3-4:2012) Dämpfung
(IEC 61300-3-4:2012)




This European Standard was approved by CENELEC on 2013-01-16. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-3-4:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61300-3-4:2013
EN 61300-3-4:2013 - 2 -
Foreword
The text of document 86B/3494/FDIS, future edition 3 of IEC 61300-3-4, prepared by IEC/SC 86B "Fibre
optic interconnecting devices and passive components", of IEC TC 86, "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-3-4:2013.
The following dates are fixed:
(dop) 2013-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2014-01-16

standards conflicting with the
document have to be withdrawn

This document supersedes EN 61300-3-4:2001.
EN 61300-3-4:2013 includes the following significant technical changes with respect to
EN 61300-3-4:2001:
a) revision of source conditions, launch conditions and power meter parameters;
b) addition of safety recommendations;
c) removal of launch condition details for multimode fibres, now referenced in EN 61300-1.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 61300-3-4:2012 was approved by CENELEC as a European
Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61300-3-29
...