iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61196-10:2016

(Main)

Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric

Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric

IEC 61196-10:2014(E) applies to semi-rigid coaxial communication cables with polytetrafluoroethylene (PTFE) dielectric and tubular outer conductor. These cables are intended for use in microwave and wireless equipments or other signal transmission equipments or units at frequencies above 500 MHz. This publication is to be read in conjunction with IE C 61196-1:2005. The contents of the corrigendum of February 2016 have been included in this copy.

Koaxiale Kommunikationskabel - Teil 10: Rahmenspezifikation für halb-starre Kabel mit Polytetrafluorethylen- (PTFE-)Isolation

Câbles coaxiaux de communication - Partie 10: Spécification intermédiaire relative aux câbles semi-rigides avec diélectrique en polytétrafluoroéthylène (PTFE)

L'IEC 61196-10:2014 s'applique aux câbles coaxiaux semi-rigides de communication comportant un diélectrique en polytétrafluoroéthylène (PTFE) et un conducteur extérieur tubulaire. Ces câbles sont destinés à être utilisés dans les équipements à microondes et sans fil ou dans d'autres équipements ou unités de transmission de signal, à des fréquences supérieures à 500 MHz. Le contenu du corrigendum publié en février 2016 est inclus dans ce document. Cette publication doit être lue conjointement avec la IEC 61196-1:2005.

Komunikacijski koaksialni kabli - 10. del: Področna specifikacija poltogih kablov s politetrafluoretilenskim (PTFE) dielektrikom (IEC 61196-10:2014)

Ta del standarda IEC 61196 velja za poltoge komunikacijske koaksialne kable s politetrafluoretilenskim (PTFE) dielektrikom in zunanjim vodnikom iz cevi. Ti kabli so namenjeni za uporabo v mikrovalovni in brezžični opremi, drugi opremi za prenos signalov ali enotah, ki delujejo na frekvencah, višjih od 500 MHz. Standard je treba brati v povezavi s standardom IEC 61196-1:2005.

General Information

Status
Published
Publication Date
21-Jan-2016
Withdrawal Date
21-Jan-2019
ICS
33.120.10 - Coaxial cables. Waveguides
Technical Committee
CLC/TC 46X - Communication cables
Drafting Committee
CLC/SC 46XA - Coaxial cables
Current Stage
6060 - Document made available - Publishing
Start Date
22-Jan-2016
Due Date
27-Feb-2017
Completion Date
22-Jan-2016
Ref Project
SIST EN 61196-10:2016 - Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-10:2014)

Relations

Replaces
EN 61196-2:2003 - Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation
Effective Date
27-Jan-2023
Corrected By
EN 61196-10:2016/AC:2016-02 - Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric
Effective Date
23-Feb-2016

Buy Standard

EN 61196-10:2016EN 61196-10:2016
PreviousNext
Standard
EN 61196-10:2016
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61196-10:2016
01-april-2016
1DGRPHãþD
SIST EN 61196-2:2004
.RPXQLNDFLMVNLNRDNVLDOQLNDEOLGHO3RGURþQDVSHFLILNDFLMDSROWRJLKNDEORYV
SROLWHWUDIOXRUHWLOHQVNLP 37)( GLHOHNWULNRP ,(&
Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with
polytetrafluoroethylene (PTFE) dielectric (IEC 61196-10:2014)
Koaxiale Kommunikationskabel - Teil 10: Rahmenspezifikation für halb-starre Kabel mit
Polytetrafluorethylen- (PTFE-)Isolation
Câbles coaxiaux de communication - Partie 10: Spécification intermédiaire relative aux
câbles semi-rigides avec diélectrique en polytétrafluoroéthylène (PTFE)
Ta slovenski standard je istoveten z: EN 61196-10:2016
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 61196-10:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61196-10:2016

---------------------- Page: 2 ----------------------

SIST EN 61196-10:2016


EUROPEAN STANDARD EN 61196-10

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2016
ICS 33.120.10 Supersedes EN 61196-2:2003
English Version
Coaxial communication cables - Part 10: Sectional specification
for semi-rigid cables with polytetrafluoroethylene (PTFE)
dielectric
(IEC 61196-10:2014)
Câbles coaxiaux de communication - Partie 10: Koaxiale Kommunikationskabel - Teil 10:
Spécification intermédiaire relative aux câbles semi-rigides Rahmenspezifikation für halb-starre Kabel mit
avec diélectrique en polytétrafluoroéthylène (PTFE) Polytetrafluorethylen- (PTFE-)Isolation
(IEC 61196-10:2014) (IEC 61196-10:2014)
This European Standard was approved by CENELEC on 2015-10-05. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61196-10:2016 E

---------------------- Page: 3 ----------------------

SIST EN 61196-10:2016
EN 61196-10:2016
European foreword
The text of document 46A/1213/FDIS, future edition 1 of IEC 61196-10, prepared by SC 46A "Coaxial
cables" of IEC/TC 46 "Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive
components and accessories" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61196-10:2016.

The following dates are fixed:
• latest date by which the document has to be (dop) 2016-07-22
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-01-22
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 61196-2:2003.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61196-10:2014 was approved by CENELEC as a European
Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 61196-10:2016
 EN 61196-10:2016

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60966-3-1:2023(Main)
Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies
SIST EN IEC 60966-3-1:2024

IEC 60966-3-1:2023 is a blank detail specification that relates to semi-flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification can be prepared by the insertion of data into the pro forma by a national organization, a manufacturer, or a user.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60966-3:2023(Main)
Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies
SIST EN IEC 60966-3:2024

IEC 60966-3:2023 is a sectional specification that relates to semi-flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It specifies the design and construction, IEC type designation, workmanship, marking and packaging, standard rating and characteristics, electrical, mechanical and environmental requirements of finished semi-flexible cable assemblies, quality assessment, delivery and storage, etc. This part of IEC 60966 applies to semi-flexible cable assemblies composed of semi-flexible coaxial cables and coaxial connectors. Semi-flexible cable assemblies are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields. NOTE 1 For the purpose of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof. NOTE 2 This sectional specification can be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62153-4-16:2021/AC:2023-11(Corrigendum)
Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up
SIST EN IEC 62153-4-16:2021/AC:2024
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60966-3-4:2023(Main)
Radio frequency and coaxial cable assemblies - Part 3-4: Detail specification for semi-flexible cable assemblies (Jumper) - Frequency range up to 6 GHz, Type 50-141 semi-flexible coaxial cable
SIST EN IEC 60966-3-4:2023

This part of IEC 60966 is a detail specification that relates to semi-flexible cable assemblies composed of type 50-141 semi-flexible coaxial cables with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-8-4) and connectors such as type 7-16 (IEC 61169-4), type 4,1-9,5 (IEC 61169-11), type S7-16 (IEC 61169-53) ，type 4,3-10 (IEC 61169-54). It gives subfamily detail requirements and severities which shall be applied. These cable assemblies are mainly used in the field of mobile communication base station antenna system, terrestrial microwave communication and radar systems. The operating frequency is up to 6000 MHz. The qualification will be conducted in accordance with IEC 60966-3. Once one variant obtain qualification approval, the other variant with same cable and connection type can obtain qualification approval by conducting tests whose results might depend on the variants. Under capability approval, the qualification will be conducted on the relating CQCs (capability qualifying components) as defined in IEC 60966-3 and described in the CM(capability manual). Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted on delivered products, all other tests will be performed on CQCs as defined in IEC 60966-3 and described in the CM.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60966-3-3:2023(Main)
Radio frequency and coaxial cable assemblies - Part 3-3: Detail specification for semi-flexible cable assemblies (jumper) - Frequency range up to 18 GHz, Type 50-141 semi-flexible coaxial cable
SIST EN IEC 60966-3-3:2023

This part of IEC 60966 is a detail specification that relates to semi-flexible cable assemblies composed of type 50-141 semi-flexible coaxial cables with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-8-4) and connectors such as, type SMA(IEC 61169-15), type N (IEC 61169-16). It gives subfamily detail requirements and severities which shall be applied. These cable assemblies are mainly used in the field of microwave and wireless equipment or other signal transmission equipment or units. The operating frequency is up to 18000 MHz. The qualification will be conducted in accordance with IEC 60966-3. Once one variant obtain qualification approval, the other variant with same cable and connection type can obtain qualification approval by conducting tests whose results might depend on the variants. Under capability approval, the qualification will be conducted on the relating CQCs (capability qualifying components) as defined in IEC 60966-3 and described in the CM(capability manual). Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted on delivered products, all other tests will be performed on CQCs as defined in IEC 60966-3 and described in the CM.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61726:2022(Main)
Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
SIST EN IEC 61726:2022

This standard describes the measurement of screening attenuation by the reverberation chamber measurement method, also called mode stirred chamber method. This standard is applicable to screening attenuation measurements of cable assemblies, cables, connectors, and passive microwave components, such as waveguides, phase shifters, diplexers/multiplexers, power dividers/combiners and etc. Modern electronic equipments have shown a demand for methods for testing screening attenuation performance of microwave components over their whole frequency range. Convenient measurement methods have existed for lower frequencies and components of regular shape. These measurement methods are described in IEC 62153 series standards. For much higher frequencies and for components of irregular shape, the reverberation chamber method should be used. Theoretically, the reverberation chamber method has no upper limit of the measurement frequency, but it is limited by the quality and sensitivity of the measurement system, and the lower limit of the measurement frequency is restricted by the size of the reverberation chamber.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62037-2:2021(Main)
Passive RF and microwave devices, intermodulation level measurement - Part 2: Measurement of passive intermodulation in coaxial cable assemblies
SIST EN IEC 62037-2:2022

This part of IEC 62037 defines a procedure to measure levels of passive intermodulation generated by a coaxial cable assembly. This test method is applicable to jumper cables, i.e. cable assemblies intended to provide interface flexibility between rigid devices. It is also used to evaluate cable assemblies that are subjected to motion in operation.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62153-4-16:2021(Main)
Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up
SIST EN IEC 62153-4-16:2021

This part of IEC 62153 specifies a method to extrapolate the test results of transfer impedance to higher frequencies and the test results of screening attenuation to lower frequencies when measured with the triaxial set-up in accordance with IEC 62153-4-3, IEC 62153‑4‑4 [1]1 and IEC 62153-4-15. This method is applicable for homogenous screens, i.e. screens having a transfer impedance directly proportional to length. The transfer impedance can have any frequency behaviour, i.e. it could have a behaviour where it does not increase with 20 dB per decade as observed for screens made of a foil and a braid.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62153-4-5:2021(Main)
Metallic communication cable test methods - Part 4-5: Electromagnetic compatibility (EMC) - Screening or coupling attenuation - Absorbing clamp method
SIST EN IEC 62153-4-5:2021

The absorbing clamp method is suitable to determine the screening- or the coupling attenuation of metallic communication cables in the frequency range of 30 MHz to 2400 MHz, depending on the performance of the clamp. It is an alternative method to the the triaxial method of IEC 62153-4-4 or IEC 62153-4-9. Due to the undefined outer circuit of this absorbing clamp method, the test results obtained at different places and laboratories could vary by at least ± 6dB.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62153-4-15:2021(Main)
Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell
SIST EN IEC 62153-4-15:2021

IEC 62153-4-15:2021 is available as IEC 62153-4-15:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62153-4-15:2021 specifies the procedures for measuring with triaxial cell the transfer impedance, screening attenuation or the coupling attenuation of connectors, cable assemblies and components, for example accessories for analogue and digital transmission systems, and equipment for communication networks and cabling. This second edition cancels and replaces the first edition published in 2015.This edition includes the following significant technical changes with respect to the previous edition: a) measurement of coupling attenuation of balanced connectors, assemblies and components with balun and balunless added; b) application of a test adapter was added; c) application of a moveable shorting plane; d) application of the triaxial "absorber" cell; e) correction of test results in the case that the receiver input impedance R is higher than the characteristic impedance of the outer circuit Z2.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day