Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle

This European Standard specifies the emission and immunity requirements for all types of rolling stock. It covers traction stock, hauled stock and trainsets including urban vehicles for use in city streets. This European standard specifies the emission limits of the rolling stock to the outside world. The scope of this part of the standard ends at the interface of the rolling stock with its respective energy inputs and outputs. In the case of locomotives, trainsets, trams etc., this is the current collector (pantograph, shoe gear). In the case of hauled stock, this is the AC or DC auxiliary power connector. However, since the current collector is part of the traction stock, it is not entirely possible to exclude the effects of this interface with the power supply line. The slow moving test has been designed to minimize these effects. There may be additional compatibility requirements within the railway system identified in the EMC plan (e.g. as specified in EN 50238). Basically, all apparatus to be integrated into a vehicle meet the requirements of EN 50121-3-2. In exceptional cases, where apparatus meets another EMC Standard, but full compliance with EN 50121-3-2 is not demonstrated, EMC is ensured by adequate integration measures of the apparatus into the vehicle system and/or by an appropriate EMC analysis and test which justifies deviating from EN 50121-3-2. Electromagnetic interference concerning the railway system as a whole is dealt with in EN 50121-2. These specific provisions are to be used in conjunction with the general provisions in EN 50121-1. The frequency range considered is from 0 Hz (DC) to 400 GHz. No measurements need to be performed at frequencies where no requirement is specified.

Bahnanwendungen - Elektromagnetische Verträglichkeit - Teil 3-1: Bahnfahrzeuge - Zug und gesamtes Fahrzeug

Applications ferroviaires - Compatibilité électromagnétique - Partie 3-1: Matériel roulant - Trains et véhicules complets

Železniške naprave - Elektromagnetna združljivost - 3-1. del: Vozna sredstva - Vlak in celotno vozilo

General Information

Status
Published
Publication Date
04-Apr-2019
Withdrawal Date
23-Oct-2019
Current Stage
6060 - Document made available - Publishing
Start Date
05-Apr-2019
Due Date
17-Apr-2021
Completion Date
05-Apr-2019

Relations

Buy Standard

Amendment
EN 50121-3-1:2017/A1:2019
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50121-3-1:2017/A1:2019
01-julij-2019
Železniške naprave - Elektromagnetna združljivost - 3-1. del: Vozna sredstva - Vlak
in celotno vozilo
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and
complete vehicle
Bahnanwendungen - Elektromagnetische Verträglichkeit - Teil 3-1: Bahnfahrzeuge - Zug
und gesamtes Fahrzeug
Applications ferroviaires - Compatibilité électromagnétique - Partie 3-1: Matériel roulant -
Trains et véhicules complets
Ta slovenski standard je istoveten z: EN 50121-3-1:2017/A1:2019
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 50121-3-1:2017/A1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50121-3-1:2017/A1:2019

---------------------- Page: 2 ----------------------

SIST EN 50121-3-1:2017/A1:2019


EUROPEAN STANDARD EN 50121-3-1:2017/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2019
ICS 45.060.01; 33.100.01; 45.140

English Version
Railway applications - Electromagnetic compatibility - Part 3-1:
Rolling stock - Train and complete vehicle
Applications ferroviaires - Compatibilité électromagnétique - Bahnanwendungen - Elektromagnetische Verträglichkeit -
Partie 3-1: Matériel roulant - Trains et véhicules complets Teil 3-1: Bahnfahrzeuge - Zug und gesamtes Fahrzeug
This amendment A1 modifies the European Standard EN 50121-3-1:2017; it was approved by CENELEC on 2018-10-30. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50121-3-1:2017/A1:2019 E

---------------------- Page: 3 ----------------------

SIST EN 50121-3-1:2017/A1:2019
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.