Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables

This standard gives guidance on writing the technical specification for the procurement of low voltage (LV) and medium voltage (MV) power cables for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers power cables only for voltages up to and including Um = 41,5 kV. This Guide does not cover cables for public distribution systems, control and instrumentation systems or communications systems. For guidance on the technical specification of cables, including their installation and termination, refer to EN 45510-2-6 The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry.

Leitfaden für die Beschaffung von Ausrüstungen für Kraftwerke - Teil 2-8: Elektrische Ausrüstung - Starkstromkabel

Guide pour l'acquisition d'équipements destinés aux centrales de production d'électricité - Partie 2-8: Equipements électriques - Câbles de puissance

Vodilo za nabavljanje opreme elektrarn – 2-8. del: Električna oprema – Elektroenergetski kabli

General Information

Status
Published
Publication Date
07-Sep-2004
Withdrawal Date
28-Feb-2007
Drafting Committee
Parallel Committee
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
04-Jun-2018
Completion Date
04-Jun-2018

Buy Standard

Standard
EN 45510-2-8:2004
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SIST EN 45510-2-8:2004SLOVENSKIdecember 2004
STANDARDVodilo za nabavljanje opreme elektrarn – 2-8. del: Električna oprema – Elektroenergetski kabliGuide for procurement of power station equipment – Part 2-8: Electrical equipment – Power cables©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 45510-2-8:2004(en)ICS27.100; 29.060.20







EUROPEAN STANDARD
EN 45510-2-8 NORME EUROPÉENNE EUROPÄISCHE NORM
September 2004
CEN Management Centre: CENELEC Central Secretariat: rue de Stassart, 36
B-1050 Brussels rue de Stassart, 35
B-1050 Brussels
© 2004 CEN/CENELEC - All rights of exploitation in any form and by any means reserved
worldwide for CEN national members and for CENELEC members.
Ref. No. EN 45510-2-8:2004 E
ICS 27.100; 29.060.20
English version
Guide for procurement of power station equipment Part 2-8: Electrical equipment – Power cables
Guide pour l'acquisition d'équipements destinés aux centrales de production d'électricité Partie 2-8: Equipements électriques – Câbles de puissance
Leitfaden für die Beschaffung von Ausrüstungen für Kraftwerke Teil 2-8: Elektrische Ausrüstung – Starkstromkabel
This European Standard was approved by CEN and CENELEC on 2001-03-06.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CENELEC Central Secretariat or to any CEN or CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN or CENELEC member into its own language and notified to the CENELEC Central Secretariat has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees, respectively, of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 45510-2-8:2004 - 2 -
CONTENTS
Foreword.4 1
Scope.6 2
Normative references.6 3
Definitions.7 3.1
Organisational terms.7 3.2
Technical terms.8 3.3
General terms.8 4
Brief overall project description.9 4.1
Role and organisation of purchaser.9 4.2
Site location.9 4.3
Equipment task.9 4.4
Equipment to be purchased.9 4.5
Control and instrumentation.10 4.6
Electrical supplies and other services.10 4.7
Other interfaces.10 4.8 Project programme.10 4.9 Equipment identification systems.10 5 Extent of supply.10 6 Terminal points.11 7 Operational requirements.11 7.1
Operating environment.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.