Transformers, power supplies, reactors and similar products - EMC requirements

IEC 62041: 2017(E) is applicable to transformers, reactors and power supply units covered by the IEC 61558 series of standards. This document deals with the electromagnetic compatibility requirements for emission and immunity within the frequency range 0 Hz to 400 GHz. No tests need to be performed at frequencies where no requirements are specified. This third edition cancels and replaces the second edition published in 2010. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  
the inclusion of a clause on tests in series production;
the inclusion of a new clause on measurement uncertainly, and
the status of a harmonized standard for this third edition.  It has the status of a product family EMC standard in accordance with IEC Guide 107:2009, Electromagnetic compatibility – Guide to the drafting of electromagnetic compatibility publications.

Transformatoren, Drosseln, Netzgeräte und entsprechende Kombinationen - EMV-Anforderungen

Transformateurs, alimentations, bobines d’inductance et produits analogues - Exigences CEM

L'IEC 62041:2017 s’applique aux transformateurs, bobines d’inductance et aux blocs d’alimentation couverts par la série de normes IEC 61558. Le présent document traite des exigences de compatibilité électromagnétique pour l’émission et l’immunité dans la bande de fréquences comprise entre 0 Hz et 400 GHz. Aucun essai n’est nécessaire aux fréquences pour lesquelles aucune exigence n’est spécifiée. Cette troisième édition annule et remplace la deuxième édition parue en 2010. Elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:  
ajout d’un article sur les essais de production en série;
ajout d’un nouvel article sur l’incertitude des mesures, et
statut de norme harmonisée pour cette troisième édition.  Elle a le statut d’une norme CEM de famille de produits conformément au Guide IEC 107:2009, Compatibilité électromagnétique – Guide pour la rédaction des publications sur la compatibilité électromagnétique. La présente version bilingue (2018-01) correspond à la version anglaise monolingue publiée en 2017-08. La version française de cette norme n'a pas été soumise au vote.

Transformatorji, napajalniki, dušilke in podobni proizvodi - Zahteve EMC

General Information

Status
Published
Publication Date
13-Feb-2020
Withdrawal Date
10-Dec-2022
Current Stage
6060 - Document made available - Publishing
Start Date
14-Feb-2020
Completion Date
14-Feb-2020

Relations

Buy Standard

Standard
EN IEC 62041:2020
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62041:2020
01-maj-2020
Nadomešča:
SIST EN 62041:2011
Transformatorji, napajalniki, dušilke in podobni proizvodi - Zahteve EMC
Transformers, reactors, power supply units, and combinations thereof - EMC
requirements
Safety of transformers, reactors, power supply units and combinations thereof - EMC
requirements
Ta slovenski standard je istoveten z: EN IEC 62041:2020
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN IEC 62041:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62041:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 62041:2020


EUROPEAN STANDARD EN IEC 62041

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2020
ICS 29.180; 33.100 Supersedes EN 62041:2010 and all of its amendments
and corrigenda (if any)
English Version
Transformers, power supplies, reactors and similar products -
EMC requirements
(IEC 62041:2017)
Transformateurs, alimentations, bobines d’inductance et Transformatoren, Drosseln, Netzgeräte und entsprechende
produits analogues – Exigences CEM Kombinationen - EMV-Anforderungen
(IEC 62041:2017) (IEC 62041:2017)
This European Standard was approved by CENELEC on 2019-12-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62041:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62041:2020
EN IEC 62041:2020 (E)
European foreword
The text of document 96/465/FDIS, future edition 3 of IEC 62041, prepared by IEC/TC 96
"Transformers, reactors, power supply units, and combinations thereof" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62041:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-09-11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-12-11
document have to be withdrawn

This document supersedes EN 62041:2010 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62041:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60065 NOTE Harmonized as EN 60065
IEC 60601-1 NOTE Harmonized as EN 60601-1
IEC 60950-1 NOTE Harmonized as EN 60950-1
IEC 61000-4-20:2010 NOTE Harmonized as EN 61000-4-20:2010 (not modified)
IEC 61010-1 NOTE Harmonized as EN 61010-1
IEC 61204 NOTE Harmonized as EN 61204
IEC 61347 (series) NOTE Harmonized as EN 61347 (series)
IEC 62040 (series) NOTE Harmonized as EN 62040 (series)
CISPR 11 NOTE Harmonized as EN 55011


2

---------------------- Page: 4 ----------------------
SIST EN IEC 62041:2020
EN IEC 62041:2020 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. F
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.