EN 62275:2015

Cable management systems - Cable ties for electrical installations

IEC 62275:2013 specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices used for the management and support of wiring systems in electrical installations. This second edition cancels and replaces the first edition published in 2006 and constitutes a technical revision. It incorporates additional tables, an annex and figures as well as revisions to such that appeared in the first edition. In places the text has been substantially altered including: - revised and updated normative references, - integral cable ties and fixing devices, - change in the range of the diameter of the test mandrel, - general notes on tests, - mechanical properties and associated tests as well as tests for resistance to ultraviolet light and corrosion.

Kabelführungssysteme - Kabelbinder für elektrische Installationen

Systèmes de câblage - Colliers pour installations électriques

L'IEC 62275:2013 spécifie les exigences pour les colliers métalliques, non métalliques et composites ainsi que pour leurs accessoires de fixation associés, utilisés pour l'aménagement et le soutien des systèmes de câblage dans les installations électriques. Cette deuxième édition annule et remplace la première édition parue en 2006. Cette édition constitue une révision technique. Elle intègre des tableaux, une annexe et des figures supplémentaires ainsi que des révisions du texte de la première édition. Certains passages du texte ont subi d'importantes modifications, parmi lesquelles: - des révisions et mises à jour des références normatives, - ceux traitant des colliers et des accessoires de fixation intégrés, - une modification de la gamme de diamètres du mandrin d'essai, - des notes générales relatives aux essais, - ceux concernant les propriétés mécaniques et les essais associés ainsi que les essais de tenue aux rayonnements ultraviolets et à la corrosion.

Sistemi za urejanje pokabljenja - Kabelske vezice za električne inštalacije

General Information

• Status: Withdrawn
• Publication Date: 26-Feb-2015
• Withdrawal Date: 18-Jan-2018
• ICS: 29.120.10 - Conduits for electrical purposes
• ICS: 29.120.99 - Other electrical accessories
• Technical Committee: CLC/TC 213 - Cable management systems
• Drafting Committee: IEC/SC 23A - IEC_SC_23A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 29-Nov-2022
• Completion Date: 29-Nov-2022
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Ref Project: SIST EN 62275:2015 - Cable management systems - Cable ties for electrical installations

Relations

• Replaces: EN 62275:2009 - Cable management systems - Cable ties for electrical installations
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 62275:2019 - Cable management systems - Cable ties for electrical installations
• Effective Date: 22-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62275:2015
01-junij-2015
1DGRPHãþD
SIST EN 62275:2009
6LVWHPL]DXUHMDQMHSRNDEOMHQMD.DEHOVNHYH]LFH]DHOHNWULþQHLQãWDODFLMH
Cable management systems - Cable ties for electrical installations
Kabelführungssysteme - Kabelbinder für elektrische Installationen
Systèmes de câblage - Colliers pour installations électriques
Ta slovenski standard je istoveten z: EN 62275:2015
ICS:
29.120.99 'UXJDHOHNWULþQDGRGDWQD Other electrical accessories
RSUHPD
SIST EN 62275:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62275:2015

---------------------- Page: 2 ----------------------

SIST EN 62275:2015


EUROPEAN STANDARD EN 62275

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2015
ICS 29.120.10; 29.120.99 Supersedes EN 62275:2009
English Version
Cable management systems - Cable ties for electrical
installations
(IEC 62275:2013 , modified)
Systèmes de câblage - Colliers pour installations Kabelführungssysteme - Kabelbinder für elektrische
électriques Installationen
(IEC 62275:2013 , modifiée) (IEC 62275:2013 , modifiziert)
This European Standard was approved by CENELEC on 2015-01-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62275:2015 E

---------------------- Page: 3 ----------------------

SIST EN 62275:2015
EN 62275:2015 - 2 -
Foreword
This document (EN 62275:2015) consists of the text of IEC 62275:2013 prepared by SC 23A “Cable
management systems” of IEC/TC 23 "Electrical accessories", together with the common modifications
prepared by CLC/TC 213 "Cable management systems".

The following dates are fixed:

(dop) 2016-01-19
• latest date by which the document has to be
implemented at national level
by publication of an identical
national standard or by endorsement
(dow) 2018-01-19
• latest date by which the national standards conflicting
with the document have to be withdrawn

This document supersedes EN 62275:2009.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).

Endorsement notice
The text of the International Standard IEC 62275:2013 was approved by CENELEC as a European
Standard with agreed common modifications.

In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 62275:2006 NOTE Harmonized as EN 62275:2009 (modified).

COMMON MODIFICATIONS


Annex A

Replace Annex A by:

---------------------- Page: 4 ----------------------

SIST EN 62275:2015
- 3 - EN 62275:2015
Annex A
(normative)

Compliance checks to be carried out for cable ties
and fixing devices complying with EN 62275:2009

Introduction

This normative annex relates to changed requirements. It informs where compliance checks are not
required and where compliance checks are required to be carried out in order that cables ties and
fixing devices can be declared to meet the requirements of EN 62275:2015 if the cable ties and fixing
devices already comply with EN 62275:2009.

Table A.1 - Required compliance checks
Test reference Description Compliance check
subclause
Marking and documentation
7.1 Marking of cab
...