EN IEC 61300-1:2022

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance

This part of IEC 61300 provides general information and guidance for the basic test and measurement procedures defined in the IEC 61300-2 series and IEC 61300-3 series for interconnecting devices, passive components, mechanical splices, fusion splice protectors, fibre management systems and protective housings. This standard is used in combination with the relevant specification which defines the tests to be used, the required degree of severity for each of them, their sequence, if relevant, and the permissible performance limits. In the event of conflict between this basic standard and the relevant specification, the latter takes precedence.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 1: Allgemeines und Leitfaden

Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 1: Généralités et recommandations

IEC 61300-1:2022 est disponible sous forme de IEC 61300-1:2022 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 61300-1:2022 donne des informations d'ordre général et des recommandations concernant les procédures fondamentales d’essai et de mesure définies dans l'IEC 61300-2 (toutes les parties) et l'IEC 61300-3 (toutes les parties) et applicables aux dispositifs d'interconnexion, aux composants passifs, aux épissures mécaniques, aux protecteurs d'épissures par fusion, aux systèmes de gestion des fibres et aux boîtiers de protection. Le présent document est utilisé avec la spécification applicable qui définit les essais à réaliser, le degré de sévérité exigé pour chacun d’eux, l'ordre dans lequel ils sont effectués, le cas échéant, et les limites des performances admissibles. Si le présent document et la spécification applicable sont en contradiction, c’est cette dernière qui prévaut. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - ajout d'informations sur les incertitudes de mesure en 4.2.1; - modification des exigences pour la variation d'affaiblissement en 4.2.2; - ajout des conditions d’injection en multimodal des fibres autres que A1-OM2, A1-OM3, - A1-OM4, A1-OM5 et A3e en 10.4; - ajout des conditions d’injection en multimodal du guide d'onde plan en 10.6; - séparation de l'Annexe A pour l’EF et de l'Annexe B pour l’EAF; - correction d'erreurs dans les définitions du flux inscrit et du flux angulaire inscrit.

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 1. del: Splošno in smernice (IEC 61300-1:2022)

Ta del standarda IEC 61300 podaja splošne informacije in smernice za postopke osnovnega preskušanja in merjenja, opredeljene v skupinah standardov IEC 61300-2 in IEC 61300-3, za spojne elemente, pasivne komponente, mehanske spojnice, enorodne ščitnike spojev, sisteme za upravljanje z optičnimi vlakni in zaščitna ohišja.
Ta standard se uporablja v kombinaciji z ustrezno specifikacijo, ki opredeljuje preskuse, ki jih je treba uporabiti, zahtevano stopnjo za vsakega od njih, njihovo zaporedje, če je pomembno, in dovoljene mejne vrednosti učinkovitosti. V primeru neskladij med tem osnovnim standardom in ustrezno specifikacijo ima prednost specifikacija.

General Information

• Status: Published
• Publication Date: 12-May-2022
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 13-May-2022
• Completion Date: 13-May-2022
• Ref Project: SIST EN IEC 61300-1:2022 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance (IEC 61300-1:2022)

Relations

• Replaces: EN 61300-1:2016 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
• Effective Date: 17-May-2022
• Amended By: EN IEC 61300-1:2022/FprA1:2024 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance - Amendment 1
• Effective Date: 13-Dec-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61300-1:2022
01-julij-2022
Nadomešča:
SIST EN 61300-1:2017
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 1. del: Splošno in smernice (IEC 61300-1:2022)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 1: General and guidance (IEC 61300-1:2022)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 1: Allgemeines und Leitfaden (IEC 61300-1:2022)
Dispositifs d'interconnexion et composants passifs fibroniques - Procédures
fondamentales d'essais et de mesures - Partie 1: Généralités et recommandations (IEC
61300-1:2022)
Ta slovenski standard je istoveten z: EN IEC 61300-1:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61300-1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61300-1:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 61300-1:2022


EUROPEAN STANDARD EN IEC 61300-1

NORME EUROPÉENNE

EUROPÄISCHE NORM May 2022
ICS 33.180.20 Supersedes EN 61300-1:2016
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 1: General and
guidance
(IEC 61300-1:2022)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren - Teil 1:
mesures - Partie 1: Généralités et recommandations Allgemeines und Leitfaden
(IEC 61300-1:2022) (IEC 61300-1:2022)
This European Standard was approved by CENELEC on 2022-05-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61300-1:2022 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61300-1:2022
EN IEC 61300-1:2022 (E)
European foreword
The text of document 86B/4582/FDIS, future edition 5 of IEC 61300-1, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61300-1:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-02-09
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-09
document have to be withdrawn

This document supersedes EN 61300-1:2016 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61300-1:2022 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61300 (series) NOTE Harmonized as EN 61300 (series)
IEC 60068-2-1 NOTE Harmonized as EN 60068-2-1
ISO 1 NOTE Harmonized as EN ISO 1
IEC 61315 NOTE Harmonized as EN IEC 61315
IEC 62614-1 NOTE Ha
...