Electric dishwashers for commercial use - Test methods for measuring the performance

This European Standard applies for manually loaded undercounter one-tank and one-tank hood type electrically heated dishwashing machines for washing plates, dishes, glassware, cutlery and similar articles. These machines are used in commercial kitchens, such as restaurants, canteens, hospitals and in businesses such as bakeries, butcher shops, etc. This European Standard does not apply to commercial dishwashers with transport systems (flight-type and rack conveyor dishwashers) and utensil washers. This European Standard does not apply to undercounter water-change dishwashers. This European Standard does not apply to appliances designed exclusively for industrial purposes. The object is to state and define the principal performance characteristics of electric dishwashers for commercial use and to describe the standard methods of measuring these characteristics. The characteristics are measured by washing plates. This European Standard does not address safety requirements.

Elektrische Geschirrspüler für den gewerblichen Gebrauch - Messverfahren für Gebrauchseigenschaften

Diese Europäische Norm gilt für handbeladene Eintank-Untertisch-Spülmaschinen und Eintank-Hauben-Spülmaschinen zum Spülen von Tellern, Geschirr, Glasgeschirr, Besteck und ähnlichen Gegenständen. Diese Maschinen werden in gewerblichen Küchen, wie z. B. in Restaurants, Kantinen, Krankenhäusern, und in Geschäften, wie z. B. Bäckereien, Fleischereien usw., eingesetzt. Diese Europäische Norm gilt nicht für gewerbliche Spülmaschinen mit Transporteinrichtungen (Band-transport- und Korbtransport-Spülmaschinen) und Utensilien-Spülmaschinen. Diese Europäische Norm gilt nicht für wasserwechselnde Untertisch-Spülmaschinen. Diese Europäische Norm gilt nicht für Geräte, die ausschließlich für industrielle Zwecke ausgelegt sind. Das Ziel ist, die grundsätzlichen Gebrauchseigenschaften von elektrischen Spülmaschinen für den gewerb-lichen Gebrauch und die Normverfahren für die Messung dieser Leistungskenngrößen anzugeben und fest-zulegen. Die Leistungskenngrößen werden durch das Spülen von Tellern gemessen. Diese Europäische Norm behandelt keine Anforderungen hinsichtlich der Sicherheit.

Lave-vaisselle électriques pour usage collectif - Méthodes d’essai pour la mesure de l'aptitude à la fonction

La présente Norme européenne s’applique aux lave-vaisselle chauffés électriquement, chargés manuellement, encastrés avec cuve, avec cuve et à capot, destinés à laver les assiettes, plats, verres, couverts et articles similaires. Ces machines sont utilisées dans les cuisines à usage collectif telles que celles des restaurants, des cantines, des hôpitaux et dans les commerces tels que les boulangeries, les boucheries, etc. La présente Norme européenne ne s’applique pas aux lave-vaisselle à usage collectif équipés de systèmes de transport (lave-vaisselle à convoyeur à paniers mobiles ou à tapis) et aux lave-ustensiles. La présente Norme européenne ne s’applique pas aux lave-vaisselle encastrés à renouvellement d’eau. La présente Norme européenne ne s’applique pas aux appareils conçus exclusivement pour des usages industriels. L’objectif est d’indiquer et de définir les principales caractéristiques d’aptitude à la fonction des lave-vaisselle électriques à usage collectif, et de décrire les méthodes normalisées de mesure de ces caractéristiques. Les caractéristiques sont mesurées en lavant les assiettes. La présente Norme européenne n’aborde pas les exigences de sécurité.

Električni pomivalni stroji za komercialno uporabo - Preskusne metode za merjenje lastnosti

Ta standard se uporablja za podpultne pomivalne stroje za ročno nalaganje z eno posodo in s pokrovom za eno posodo za pomivanje krožnikov, posode, steklene posode, jedilnega pribora in podobnih izdelkov.
Ti stroji se uporabljajo v profesionalnih kuhinjah, npr. v restavracijah, menzah in bolnišnicah, ter v obrtnih enotah, kot so pekarne, mesnice itd.
Ta standard se ne uporablja za komercialne pomivalne stroje s tračnim sistemom (tračni in komorni pomivalni stroji) ter pomivalne stroje za jedilni pribor.
Ta standard se ne uporablja za podpultne pomivalne stroje z menjavo vode.
Ta standard se ne uporablja za naprave, zasnovane izključno za industrijsko uporabo.
Namen tega standarda je navesti in opredeliti glavne značilnosti delovanja električnih pomivalnih strojev za profesionalno uporabo ter opisati standardne metode merjenja teh značilnosti.
Ta standard ne obravnava varnostnih zahtev.

General Information

Status
Withdrawn
Publication Date
23-Feb-2017
Withdrawal Date
15-Jan-2020
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
24-Oct-2022
Completion Date
24-Oct-2022

Relations

Buy Standard

Standard
EN 50593:2017 - BARVE6
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 50593:2015 - BARVE
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50593:2017
01-april-2017
(OHNWULþQLSRPLYDOQLVWURML]DNRPHUFLDOQRXSRUDER3UHVNXVQHPHWRGH]D
PHUMHQMHODVWQRVWL
Electric dishwashers for commercial use - Test methods for measuring the performance
Elektrische Geschirrspüler für den gewerblichen - Gebrauch Messverfahren für
Gebrauchseigenschaften
Lave-vaisselle électriques pour usage collectif - Méthodes d’essai pour la mesure de
l'aptitude à la fonction
Ta slovenski standard je istoveten z: EN 50593:2017
ICS:
97.040.40 Pomivalni stroji Dishwashers
SIST EN 50593:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50593:2017

---------------------- Page: 2 ----------------------

SIST EN 50593:2017


EUROPEAN STANDARD EN 50593

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2017
ICS 97.040.40

English Version
Electric dishwashers for commercial use - Test methods for
measuring the performance
Lave-vaisselle électriques pour usage collectif - Méthodes Elektrische Geschirrspüler für den gewerblichen Gebrauch -
d'essai pour la mesure de l'aptitude à la fonction Messverfahren für Gebrauchseigenschaften
This European Standard was approved by CENELEC on 2017-01-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50593:2017 E

---------------------- Page: 3 ----------------------

SIST EN 50593:2017
EN 50593:2017 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions. 5
4 List of measurements . 8
5 General conditions for measurements . 8
5.1 General . 8
5.2 Conditioning of the machine under test and sequence of test procedures . 8
5.3 Power supply . 9
5.4 Test programme . 9
5.5 Ambient conditions . 9
5.6 Water supply . 9
5.6.1 General . 9
5.6.2 Water supply – Temperature . 9
5.6.3 Hardness .
...

SLOVENSKI STANDARD
oSIST prEN 50593:2015
01-oktober-2015
(OHNWULþQLSRPLYDOQLVWURML]DNRPHUFLDOQRXSRUDER0HWRGH]DPHUMHQMHODVWQRVWL
Electric dishwashers for commercial use - Test methods for measuring the performance
Elektrische Geschirrspüler für den gewerblichen - Gebrauch Messverfahren für
Gebrauchseigenschaften
Lave-vaisselle électriques pour usage collectif - Méthodes d’essai pour la mesure de
l'aptitude à la fonction
Ta slovenski standard je istoveten z: prEN 50593:2015
ICS:
97.040.40 Pomivalni stroji Dishwashers
oSIST prEN 50593:2015 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50593:2015

---------------------- Page: 2 ----------------------
oSIST prEN 50593:2015

EUROPEAN STANDARD DRAFT
prEN 50593
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2015
ICS 97.040.40
English Version
Electric dishwashers for commercial use - Test methods for
measuring the performance
Lave-vaisselle électriques pour usage collectif - Méthodes Elektrische Geschirrspüler für den gewerblichen - Gebrauch
d'essai pour la mesure de l'aptitude à la fonction Messverfahren für Gebrauchseigenschaften
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2015-10-03.

It has been drawn up by CLC/TC 59X.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 24415 Ref. No. prEN 50593:2015 E

---------------------- Page: 3 ----------------------
oSIST prEN 50593:2015
prEN 50593:2015 (E)
1 Contents Page
2 Foreword . 4
3 Scope . 5
1
4 2 Normative references . 5
5 Terms and definitions . 5
3
6 4 List of measurements . 8
7 General conditions for measurements . 8
5
8 5.1 General . 8
9 5.2 Conditioning of the machine under test and sequence of test procedures . 8
10 5.3 Power supply . 8
11 Test programme . 9
5.4
12 5.5 Ambient conditions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.