EN 61169-18:2011
(Main)Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA
Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA
IEC 61169-18:2011 is a sectional specification and provides information and rules for preparation of detail specification of SSMA series RF connectors together with the pro-forma blank detail specification. It also prescribes mating face dimensions for grade 1 high performance connectors, dimensional detail of grade 0 standard test connectors, gauging information and tests selected from IEC 61169-1 applicable to all detail specifications relating to SSMA series RF connectors. SSMA series connectors with characteristic impedance 50 ohm are used for millimeter wave applications, connecting with RF cables or micro strips. The operating frequency limit is up to 35 GHz. The coupling thread is 10-36 UNS thread. It indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. It cancels and replaces IEC/PAS 61169-18, published in 2009, of which it constitutes a minor revision. The only change between the PAS and this standard is the removal of inch dimensions for each of the figures.
Hochfrequenz-Steckverbinder - Teil 18: Rahmenspezifikation - Hochfrequenz-Koaxial-Steckverbinder des Typs SSMA
Connecteurs pour fréquences radioélectriques – Partie 18: Spécification intermédiaire – Connecteurs coaxiaux pour fréquences radioélectriques de type SSMA
La CEI 61169-18:2011 est une spécification intermédiaire et fournit des informations et des règles en vue de l'établissement de la spécification particulière des connecteurs RF série SSMA, ainsi que la spécification particulière cadre pro-forma. Elle prescrit également les dimensions des faces d'accouplement pour des connecteurs de classe 1 haute performance, les détails dimensionnels des connecteurs d'essai normalisés de classe 0, les informations concernant les calibres, et les essais choisis dans la CEI 61169-1 applicables à toutes les spécifications particulières ayant trait aux connecteurs RF série SSMA. Les connecteurs série SSMA d'impédance caractéristique 50 ohm sont utilisés pour des applications à ondes millimétriques, et sont prévus pour être connectés avec des câbles RF ou des microrubans. La limite de fréquence de fonctionnement est inférieure ou égale à 35 GHz. Le filetage de couplage est le filet UNS 10-36. La présente spécification indique les caractéristiques de performance recommandées à prendre en compte pour la rédaction d'une spécification particulière et elle couvre les programmes d'essais et les exigences de contrôle pour les niveaux d'assurance qualité M et H. Elle annule et remplace la CEI/PAS 61169-18, publiée en 2009, dont elle constitue une révision mineure. Le seul changement entre le PAS et la présente norme est la suppression des dimensions en inch pour chacune des figures.
Radiofrekvenčni konektorji - 18. del: Področna specifikacija - Radiofrekvenčni koaksialni konektorji vrste SSMA (IEC 61169-18:2011)
Konektorji serije SSMA z značilno impedanco 50 Ω se uporabljajo pri aplikacijah z milimetrskim sevanjem in se povezujejo z radiofrekvenčnimi kabli ali mikrotrakovi. Meja delovne frekvence je do 35 GHz. Spojni navoj ima navoj 10-36 UNS.
Ta področna specifikacija podaja informacije in pravila za pripravo podrobne specifikacije radiofrekvenčnih konektorjev serije SSMA skupaj s prazno predlogo za podrobno specifikacijo.
Predpisuje tudi dimenzije za združevanje za visokozmogljivostne konektorje stopnje 1, podrobnosti dimenzij standardnih preskusnih konektorjev stopnje 0, informacije in preskuse za umerjanje, izbrane iz IEC 61169-1, ki veljajo za vse podrobne specifikacije, povezane z radiofrekvenčnimi konektorji serije SSMA.
Ta specifikacija navaja priporočene značilnosti delovanja, ki jih je treba upoštevati pri pisanju podrobne specifikacije, in zajema razpored preskusov in zahteve za nadzor za ocenjevalne ravni M in H.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61169-18:2011
01-maj-2011
5DGLRIUHNYHQþQLNRQHNWRUMLGHO 3RGURþQDVSHFLILNDFLMD5DGLRIUHNYHQþQL
NRDNVLDOQLNRQHNWRUMLYUVWH660$ ,(&
Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial
connectors of type SSMA (IEC 61169-18:2011)
Hochfrequenz-Steckverbinder - Teil 18: Rahmenspezifikation - Hochfrequenz-Koaxial-
Steckverbinder des Typs SSMA (IEC 61169-18:2011)
Connecteurs pour fréquences radioélectriques - Partie 18: Spécification intermédiaire -
Connecteurs coaxiaux pour fréquences radioélectriques de type SSMA (CEI 61169-
18:2011)
Ta slovenski standard je istoveten z: EN 61169-18:2011
ICS:
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML R.F. connectors
5)
SIST EN 61169-18:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61169-18:2011
---------------------- Page: 2 ----------------------
SIST EN 61169-18:2011
EUROPEAN STANDARD
EN 61169-18
NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM
ICS 33.120.30
English version
Radio-frequency connectors -
Part 18: Sectional specification -
Radio frequency coaxial connectors of type SSMA
(IEC 61169-18:2011)
Connecteurs pour fréquences Hochfrequenz-Steckverbinder -
radioélectriques - Teil 18: Rahmenspezifikation -
Partie 18: Spécification intermédiaire - Hochfrequenz-Koaxial-Steckverbinder des
Connecteurs coaxiaux pour fréquences Typs SSMA
radioélectriques de type SSMA (IEC 61169-18:2011)
(CEI 61169-18:2011)
This European Standard was approved by CENELEC on 2011-03-03. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61169-18:2011 E
---------------------- Page: 3 ----------------------
SIST EN 61169-18:2011
EN 61169-18:2011 - 2 -
Foreword
The text of document 46F/136/CDV, future edition 1 of IEC 61169-18, prepared by SC 46F, R.F. and
microwave passive components, of IEC TC 46, Cables, wires, waveguides, R.F. connectors, R.F. and
microwave passive components and accessories, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 61169-18 on 2011-03-03.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-12-03
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-03-03
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61169-18:2011 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 61169-18:2011
- 3 - EN 61169-18:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.