iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 62402:2007

(Main)

Obsolescence management - Application guide

Obsolescence management - Application guide

This International Standard gives guidance for establishing a framework for obsolescence management and for planning a cost-effective obsolescence management process that is applicable through all phases of the product life cycle.

Anleitung zum Obsoleszenzmanagement

Gestion de l’obsolescence - Guide d’application

La présente Norme internationale donne des indications pour établir un cadre pour la gestion de l'obsolescence et pour planifier un processus de gestion de l'obsolescence efficace applicable à toutes les phases du cycle de vie du produit.

Upravljanje zastarelosti - Navodilo za uporabo (IEC 62402:2007)

General Information

Status
Withdrawn
Publication Date
25-Jul-2007
Withdrawal Date
30-Jun-2010
ICS
21.020 - Characteristics and design of machines, apparatus, equipment
Technical Committee
CLC/SR 56 - Dependability
Drafting Committee
IEC/TC 56 - IEC_TC_56
Parallel Committee
IEC/TC 56 - IEC_TC_56
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
03-Jul-2022
Completion Date
03-Jul-2022
Ref Project
SIST EN 62402:2008 - Obsolescence management - Application guide

Relations

Replaced By
EN IEC 62402:2019 - Obsolescence management
Effective Date
16-Jul-2019

Buy Standard

EN 62402:2008EN 62402:2008
PreviousNext
Standard
EN 62402:2008
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62402:2008
01-januar-2008
Upravljanje zastarelosti - Navodilo za uporabo (IEC 62402:2007)
Obsolescence management - Application guide (IEC 62402:2007)
Anleitung zum Obsoleszenzmanagement (IEC 62402:2007)
Gestion de l’obsolescence - Guide d’application (IEC 62402:2007)
Ta slovenski standard je istoveten z: EN 62402:2007
ICS:
21.020 =QDþLOQRVWLLQQDþUWRYDQMH Characteristics and design of
VWURMHYDSDUDWRYRSUHPH machines, apparatus,
equipment
SIST EN 62402:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 62402

NORME EUROPÉENNE
July 2007
EUROPÄISCHE NORM

ICS 21.020


English version


Obsolescence management -
Application guide
(IEC 62402:2007)


Gestion de l’obsolescence -  Anleitung zum
Guide d’application Obsoleszenzmanagement
(CEI 62402:2007) (IEC 62402:2007)




This European Standard was approved by CENELEC on 2007-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62402:2007 E

---------------------- Page: 2 ----------------------

EN 62402:2007 - 2 -
Foreword
The text of document 56/1189/FDIS, future edition 1 of IEC 62402, prepared by IEC TC 56,
Dependability, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 62402 on 2007-07-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62402:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60300-3-3 NOTE  Harmonized as EN 60300-3-3:2004 (not modified).
IEC 60300-3-12 NOTE  Harmonized as EN 60300-3-12:2004 (not modified).
IEC 60812 NOTE  Harmonized as EN 60812:2006 (not modified).
ISO 9000 NOTE  Harmonized as EN ISO 9000:2005 (not modified).
ISO 9001 NOTE  Harmonized as EN ISO 9001:2000 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 62402:2007
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1)
IEC 60050-191 - International Electrotechnical Vocabulary - -
(IEV) -
Chapter 191: Dependability and quality of
service


1) 2)
IEC 60300-1 - Dependability management - EN 60300-1 2003
Part 1: Dependability management systems


IEC 60300-2 2004 Dependability management - EN 60300-2 2004
Part 2: Guidelines for dependability
management


1)
IEC 62198 - Project risk management - Application - -
guidelines


1)
IEC/TS 62239 - Process management for avionics - - -
Preparation of an electronic components
management plan


IEC 62258 Series Semiconductor die products EN 62258 Series


...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62506:2023(Main)
Methods for product accelerated testing
SIST EN IEC 62506:2024

IEC 62506:2023 provides guidance on the application of various accelerated test techniques for measurement or improvement of item reliability. Identification of potential failure modes that can be experienced in the use of an item and their mitigation is instrumental to ensure dependability of an item. The object of the methods is to either identify potential design weakness or provide information on item reliability, or to achieve necessary reliability and availability improvement, all within a compressed or accelerated period of time. This document addresses accelerated testing of non-repairable and repairable systems. It can be used for probability ratio sequential tests, fixed duration tests and reliability improvement/growth tests, where the measure of reliability can differ from the standard probability of failure occurrence. This document also extends to present accelerated testing or production screening methods that would identify weakness introduced into the item by manufacturing error, which can compromise item reliability. Services and people are however not covered by this document.

  • Standard
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61124:2023(Main)
Reliability testing - Compliance tests for constant failure rate and constant failure intensity
SIST EN IEC 61124:2023

This International Standard gives a number of optimized test plans, the corresponding border lines and characteristics. In addition the algorithms for designing test plans using a spreadsheet program are also given, together with guidance on how to choose test plans. This standard specifies procedures to test whether an observed value of - failure rate, - failure intensity, - mean operating time to failure (MTTF), - mean operating time between failures (MTBF), conforms to a given requirement. It is assumed, except where otherwise stated, that during the accumulated test time, the times to failure or the operating times between failures are independent and identically exponentially distributed. This assumption implies that the failure rate or failure intensity is assumed to be constant. Four types of test plans are described as follows: - truncated sequential probability ratio test (SPRT); - fixed time/failure terminated test (FTFT); - fixed calendar time terminated test without replacement; - combined test. This standard does not cover guidance on how to plan, perform, analyse and report a test. This information can be found in IEC 60300-3-5. This standard does not describe test conditions. This information can be found in IEC 60605-2 and in IEC 60300-3-5.

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61123:2020(Main)
Reliability testing - Compliance test plans for success ratio
SIST EN IEC 61123:2020

IEC 61123:2019 is intended to define a procedure to verify if a reliability of an item/system complies with the stated requirements. The requirement is assumed to be specified as the percentage of success (success ratio) or the percentage of failures (failure ratio). This document can be used where a number of items are tested (number of trials performed) and classified as passed or failed. It can also be used where one or a number of items are tested repeatedly. The procedures are based on the assumption that the probability of success or failure is the same from trial to trial (statistically independent events). Plans for fixed trial/failure terminated tests as well as truncated sequential probability ratio tests (SPRTs) are included. This document contains extensive tables with ready-to-use SPRT plans and their characteristics for equal and non-equal risks for supplier and customer. In the case of the reliability compliance tests for constant failure rate/intensity, IEC 61124 applies. This second edition cancels and replaces the first edition published in 1991. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: The sequential probability ratio test (SPRT) [1, 2][1] has been significantly developed in recent years [3, 4, 5]. This edition contains shorter and accurate tests, a wide range of test plans, and significant additional characteristic data, as follows: the tests are significantly truncated (the maximum trial numbers are low) without substantially increasing the expected number of trials to decision (ENT); the true producer’s and consumer’s risks (α', β') are given and very close to the nominal (α, β); the range of the test parameters is wide (failure ratio, risks and discrimination ratio); the test plans include various risk ratios (not restricted to equal risks only); the values of ENT are accurate and given in the relevant region (for practical use); guidelines for extension of the test sets (interpolation and extrapolation) are included. In Annex C, the use of the cumulative binomial distribution function of Excel that simplifies the procedure of designing has been added (Clause C.3). Keywords: verify if a reliability of an item/system complies with the stated requirements

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62402:2019(Main)
Obsolescence management
SIST EN IEC 62402:2019

IEC 62402:2019 provides requirements and guidance for obsolescence management applicable to any organization that is dependent on another organization to obtain value from the usefulness of the items that it provides. A cost-effective obsolescence management process and the activities used to implement the process are applicable throughout all phases of an item’s life cycle. This document covers the following areas: • establishing an obsolescence management policy; • establishing an infrastructure and an organization; • developing an obsolescence management plan (OMP); • developing strategies to minimize obsolescence during design; • determining an obsolescence management approach; • selecting obsolescence resolution and implementation; • measuring and improving the performance of the outcomes of the obsolescence management activities. Guidance on obsolescence management is included as notes, in the informative annexes and references in the Bibliography. This second edition cancels and replaces the first edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) this document has now been written with requirements as a standard, not a guide; b) this document continues to have guidance in the informative annexes; c) this document has been written as a general process for all technologies and items. Keywords: obsolescence management

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60812:2018(Main)
Failure modes and effects analysis (FMEA and FMECA)
SIST EN IEC 60812:2018

IEC 60812:2018 explains how failure modes and effects analysis (FMEA), including the failure modes, effects and criticality analysis (FMECA) variant, is planned, performed, documented and maintained. The purpose of failure modes and effects analysis (FMEA) is to establish how items or processes might fail to perform their function so that any required treatments could be identified. An FMEA provides a systematic method for identifying modes of failure together with their effects on the item or process, both locally and globally. It may also include identifying the causes of failure modes. Failure modes can be prioritized to support decisions about treatment. Where the ranking of criticality involves at least the severity of consequences, and often other measures of importance, the analysis is known as failure modes, effects and criticality analysis (FMECA). This document is applicable to hardware, software, processes including human action, and their interfaces, in any combination. An FMEA can be used in a safety analysis, for regulatory and other purposes, but this being a generic standard, does not give specific guidance for safety applications. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition: a) the normative text is generic and covers all applications; b) examples of applications for safety, automotive, software and (service) processes have been added as informative annexes; c) tailoring the FMEA for different applications is described; d) different reporting formats are described, including a database information system; e) alternative means of calculating risk priority numbers (RPN) have been added; f) a criticality matrix based method has been added; g) the relationship to other dependability analysis methods have been described. Keywords: failure modes and effects analysis (FMEA), failure modes effects and criticality analysis (FMECA)

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62853:2018(Main)
Open systems dependability
SIST EN IEC 62853:2018

IEC 62853:2018 provides guidance in relation to a set of requirements placed upon system life cycles in order for an open system to achieve open systems dependability. This document elaborates on IEC 60300-1 by providing details of the changes needed to accommodate the characteristics of open systems. It defines process views based on ISO/IEC/IEEE 15288:2015, which identifies the set of system life cycle processes. This document is applicable to life cycles of products, systems, processes or services involving hardware, software and human aspects or any integrated combinations of these elements. For open systems, security is especially important since the systems are particularly exposed to attack. This document can be used to improve the dependability of open systems and to provide assurance that the process views specific to open systems achieve their expected outcomes. It helps an organization define the activities and tasks that need to be undertaken to achieve dependability objectives in an open system, including dependability related communication, dependability assessment and evaluation of dependability throughout system life cycles. Keywords: dependability of open systems

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60300-3-3:2017(Main)
Dependability management - Part 3-3: Application guide - Life cycle costing
SIST EN 60300-3-3:2017

Provides a general introduction to the concept of life cycle costing, covers all applications and particularly highlights the costs associated with dependability of the product. Explains the purpose and value of life cycle costing and outlines the general approaches involved. Identifies typical life cycle cost elements to facilitate project and programme planning. General guidance is provided for conducting a life cycle cost analysis, including life cycle cost model development. Illustrative examples are provided to explain the concepts.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62550:2017(Main)
Spare parts provisioning
SIST EN 62550:2017

IEC 62550:2017 describes requirements for spare parts provisioning as a part of supportability activities that affect dependability performance so that continuity of operation of products, equipment and systems for their intended application can be sustained. This document is intended for use by a wide range of suppliers, maintenance support organizations and users and can be applied to all items.
Keywords: necessary spare parts

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61703:2016(Main)
Mathematical expressions for reliability, availability, maintainability and maintenance support terms
SIST EN 61703:2017

IEC 61703:2016 provides mathematical expressions for selected reliability, availability, maintainability and maintenance support measures defined in IEC 60050­192:2015. In addition, it introduces some terms not covered in IEC 60050-192:2015. They are related to aspects of the system of item classes (see hereafter). According to IEC 60050-192:2015, dependability [192-01-22] is the ability of an item to perform as and when required and an item [192-01-01] can be an individual part, component, device, functional unit, equipment, subsystem, or system. To account for mathematical constraints, this standard splits the items between the individual items considered as a whole (e.g. individual components) and the systems made of several individual items. It provides general considerations for the mathematical expressions for systems as well as individual items but the individual items which are easier to model are analysed in more detail with regards to their repair aspects. This standard is mainly applicable to hardware dependability, but many terms and their definitions may be applied to items containing software. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - standard made as self containing as possible; - item split between individual items and systems; - generalization of the dependability concepts for systems made of several components [introduction of the conditional failure intensity (Vesely failure rate); - introduction of the state-transition and the Markovian models; - generalization of the availability to production availability]; - introduction of curves to illustrate the various concepts. Keywords: mathematical expressions for dependability

  • Standard
    101 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    101 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62741:2015(Main)
Demonstration of dependability requirements - The dependability case
SIST EN 62741:2015

IEC 62741:2015 gives guidance on the content and application of a dependability case and establishes general principles for the preparation of a dependability case. This standard is written in a basic project context where a customer orders a system that meets dependability requirements from a supplier and then manages the system until its retirement. The methods provided in this standard may be modified and adapted to other situations as needed. The dependability case is normally produced by the customer and supplier but can also be used and updated by other organizations. For example, certification bodies and regulators may examine the submitted case to support their decisions and users of the system may update/expand the case, particularly where they use the system for a different purpose. Keywords: dependability, reliability, availability, maintainability, supportability, usability, testability, durability.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day