EN IEC 62822-3:2018

Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 3: Resistance welding equipment

IEC 62822-3:2017 applies to equipment for resistance welding and allied processes designed for occupational use by professionals and for use by laymen. This document specifies procedures for the assessment of human exposure to magnetic fields produced by resistance welding equipment. It covers non-thermal biological effects in the frequency range from 0 Hz to 10 MHz and defines standardized test scenarios.

Einrichtungen zum Widerstandsschweißen - Bewertung elektrischer Schweißeinrichtungen in Bezug auf Begrenzungen der Exposition von Personen gegenüber elektromagnetischen Feldern (0 Hz - 300 GHz) - Teil 3: Grundnorm für Widerstandsschweißeinrichtungen

Matériels de soudage électrique - Évaluation des restrictions relatives à l'exposition humaine aux champs électromagnétiques (0 Hz à 300 GHz) - Partie 3: Matériels de soudage par résistance

L’IEC 62822-3:2017 s'applique aux matériels de soudage par résistance et techniques connexes conçus pour un usage professionnel et non professionnel. Le présent document spécifie les procédures d'évaluation de l'exposition humaine aux champs magnétiques générés par les matériels de soudage par résistance. Il couvre les effets biologiques non thermiques dans la plage de fréquences comprises entre 0 Hz et 10 MHz et définit des scénarios d'essai normalisés.

Električna varilna oprema - Ocenjevanje omejitev z vidika izpostavljenosti človeka elektromagnetnim poljem (od 0 Hz do 300 Hz) - 3. del: Oprema za uporovno varjenje (IEC 62822-3:2017)

Ta del standarda IEC 62822 se uporablja za opremo za uporovno varjenje in sorodne postopke, zasnovano za uporabo pri delu strokovnjakov in laikov.
OPOMBA 1: Običajni povezani procesi so uporovno trdo ali mehko spajkanje ali uporovno gretje, ki se doseže na način, primerljiv z opremo za uporovno varjenje.
Ta dokument določa postopke za oceno izpostavljenosti delavcev magnetnim poljem, ki jih ustvari oprema za uporovno varjenje. Obravnava atermične biološke vplive v frekvenčnem razponu od 0 Hz do 10 MHz in določa standardizirane preskusne scenarije.
OPOMBA 2: Splošni izraz »polje« se v tem dokumentu uporablja za »magnetno polje«.
OPOMBA 3: Za oceno izpostavljenosti električnim poljem in toplotnim vplivom se uporabljajo metode, podane v splošnem standardu IEC 62311 ali zadevnih osnovnih standardih.
Ta dokument ne določa metod za oceno delovnega mesta v povezavi s tveganji zaradi elektromagnetnih polj (EMF). Vendar se podatki o elektromagnetnih poljih, ki se pridobijo na podlagi uporabe tega osnovnega standarda, lahko uporabijo kot pomoč pri ocenjevanju delovnega mesta.
Za proizvode, ki jih obravnava ta dokument, se lahko uporabljajo drugi standardi. Tega dokumenta zlasti ni mogoče uporabljati za dokazovanje elektromagnetne združljivosti z drugo opremo. Ne določa nobenih varnostnih zahtev za proizvode, razen tistih, ki se posebej navezujejo na izpostavljenost delavcev elektromagnetnim poljem.
Ta dokument se osredotoča na uporabo koeficientov spajanja za ocenjevanje izpostavljenosti elektromagnetnim poljem.

General Information

• Status: Published
• Publication Date: 15-Feb-2018
• Withdrawal Date: 15-Feb-2021
• ICS: 25.160.30 - Welding equipment
• Technical Committee: CLC/TC 26 - Electric welding
• Drafting Committee: IEC/TC 26 - IEC_TC_26
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 16-Feb-2018
• Completion Date: 16-Feb-2018
• Ref Project: SIST EN IEC 62822-3:2018 - Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 Hz) - Part 3: Resistance welding equipment (IEC 62822-3:2017)

Relations

• Replaces: EN 50505:2008 - Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for resistance welding and allied processes
• Effective Date: 23-Jan-2023
• Replaced By: EN IEC 62822-3:2023 - Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 3: Resistance welding equipment
• Effective Date: 17-Aug-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62822-3:2018
01-april-2018
1DGRPHãþD
SIST EN 50505:2008
(OHNWULþQDYDULOQDRSUHPD2FHQMHYDQMHRPHMLWHY]YLGLNDL]SRVWDYOMHQRVWLþORYHND
HOHNWURPDJQHWQLPSROMHPRG+]GR+]GHO2SUHPD]DXSRURYQR
YDUMHQMH,(&
Electric welding equipment - Assessment of restrictions related to human exposure to
electromagnetic fields (0 Hz to 300 Hz) - Part 3: Resistance welding equipment (IEC
62822-3:2017)
Matériels de soudage électrique - Évaluation des restrictions relatives à l'exposition
humaine aux champs électromagnétiques (0 Hz à 300 GHz) - Partie 3: Matériels de
soudage par résistance (IEC 62822-3:2017)
Ta slovenski standard je istoveten z: EN IEC 62822-3:2018
ICS:
13.280 Varstvo pred sevanjem Radiation protection
25.160.30 Varilna oprema Welding equipment
SIST EN IEC 62822-3:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 62822-3:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 62822-3:2018


EUROPEAN STANDARD EN IEC 62822-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2018
ICS 25.160.30 Supersedes EN 50505:2008
English Version
Electric welding equipment - Assessment of restrictions related
to human exposure to electromagnetic fields (0 Hz to 300 Hz) -
Part 3: Resistance welding equipment
(IEC 62822-3:2017)
Matériels de soudage électrique - Évaluation des Einrichtungen zum Widerstandsschweißen - Bewertung
restrictions relatives à l'exposition humaine aux champs elektrischer Schweißeinrichtungen in Bezug auf
électromagnétiques (0 Hz à 300 GHz) - Partie 3: Matériels Begrenzungen der Exposition von Personen gegenüber
de soudage par résistance elektromagnetischen Feldern (0 Hz - 300 GHz) - Teil 3:
(IEC 62822-3:2017) Grundnorm für Widerstandsschweißeinrichtungen
(IEC 62822-3:2017)
This European Standard was approved by CENELEC on 2017-10-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62822-3:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 62822-3:2018
EN IEC 62822-3:2018 (E)
European foreword
The text of document 26/626A/FDIS, future edition 1 of IEC 62822-3, prepared by IEC/TC 26 "Electric
welding" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 62822-3:2018.

The following dates are fixed:
(dop) 2018-08-16
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-02-16
standards conflicting with the
document have to be withdrawn

This document supersedes EN 50505:2008.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62822-3:2017 was approved by CENELEC as a European
Standard without any modification.

2

---------------------- Page: 4 ----------------------

SIST EN IEC 62822-3:2018
EN IEC 62822-3:2018 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, onl
...