EN IEC 62430:2019

Environmentally conscious design (ECD) - Principles, requirements and guidance

IEC 62430:2019 describes principles, specifies requirements and provides guidance for organizations intending to integrate environmental aspects into the design and development in order to minimize the adverse environmental impacts of their products. This document applies to processes on how ECD (environmentally conscious design) are integrated into the design and development. This document applies to any organization, regardless of its size, type or sector. This document does not provide requirements for assessing the conformity of individual products. This horizontal standard is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108. One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal standards in the preparation of its publications. The contents of this horizontal standard will not apply unless specifically referred to or included in the relevant publications. IEC 62430:2019 cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Scope is extended from electrotechnical product and systems to all products including services. b) As a consequence of the scope expansion, non-electrotechnical products, services in particular, are taken into account to modify requirements. c) Clause 6 is added as a guidance.

Umweltbewusstes Gestalten (ECD) - Grundsätze, Anforderungen und Leitfaden

Écoconception (ECD) - Principes, exigences et recommandations

L'IEC 62430:2019 décrit les principes, spécifie les exigences et fournit des recommandations aux organismes qui envisagent d'intégrer les aspects environnementaux dès la conception et le développement afin de réduire le plus possible les impacts environnementaux négatifs de ces produits. Le présent document s'applique aux processus employés pour l'intégration de l'écoconception (ECD) aux étapes de conception et de développement. Le présent document s'applique à tout organisme, de tout secteur, taille ou type. Le présent document ne fournit aucune exigence pour l'évaluation de la conformité des produits individuels. La présente norme horizontale est avant tout destinée à être utilisée par les comités d'études dans le cadre de l'élaboration de normes conformément aux principes établis dans le Guide IEC 108. L'une des responsabilités d'un comité d'études consiste, le cas échéant, à utiliser les normes horizontales dans le cadre de l'élaboration de ses publications. Le contenu de la présente norme horizontale s'appliquera seulement s'il sert spécifiquement de référence ou est intégré dans les publications correspondantes. L'IEC 62430:2019 annule et remplace la première édition parue en 2009. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) le domaine d'application ne couvre plus uniquement les produits et systèmes électrotechniques et a été élargi à l'ensemble des produits, y compris les services; b) par suite de l'élargissement du domaine d'application, les produits non électrotechniques et en particulier les services sont pris en compte pour la modification des exigences; c) l'Article 6 a été ajouté pour les recommandations.

Okoljsko osveščeno snovanje (ECD) - Načela, zahteve in napotki

General Information

• Status: Published
• Publication Date: 19-Dec-2019
• Withdrawal Date: 25-Nov-2022
• ICS: 13.020.01 - Environment and environmental protection in general
• Technical Committee: CLC/TC 111X - Environment
• Drafting Committee: IEC/TC 111 - Environmental standardization for electrical and electronic products and systems
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 20-Dec-2019
• Completion Date: 20-Dec-2019
• Ref Project: SIST EN IEC 62430:2021 - Environmentally Conscious Design (ECD) - Principles, requirements and guidance

Relations

• Replaces: EN 62430:2009 - Environmentally conscious design for electrical and electronic products
• Effective Date: 24-Dec-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62430:2021
01-junij-2021
Nadomešča:
SIST EN 62430:2010
Okoljsko osveščeno snovanje (ECD) - Načela, zahteve in napotki
Environmentally Conscious Design (ECD) - Principles, requirements and guidance
Ta slovenski standard je istoveten z: EN IEC 62430:2019
ICS:
13.020.30 Ocenjevanje vpliva na okolje Environmental impact
assessment
29.020 Elektrotehnika na splošno Electrical engineering in
general
31.020 Elektronske komponente na Electronic components in
splošno general
SIST EN IEC 62430:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62430:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 62430:2021


EUROPEAN STANDARD EN IEC 62430

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2019
ICS 13.020.01 Supersedes EN 62430:2009 and all of its amendments
and corrigenda (if any)
English Version
Environmentally conscious design (ECD) - Principles,
requirements and guidance
(IEC 62430:2019)
Écoconception (ECD) - Principes, exigences et Umweltbewusstes Gestalten (ECD) - Grundsätze,
recommandations Anforderungen und Leitfaden
(IEC 62430:2019) (IEC 62430:2019)
This European Standard was approved by CENELEC on 2019-11-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62430:2019 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62430:2021
EN IEC 62430:2019 (E)
European foreword
The text of document 111/536/FDIS, future edition 2 of IEC 62430, prepared by IEC/TC 111
"Environmental standardization for electrical and electronic products and systems" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62430:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-08-26
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-11-26
document have to be withdrawn

This document supersedes EN 62430:2009 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62430:2019 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62430:2009 NOTE Harmonized as EN 62430:2009 (not modified)
IEC 62474 NOTE Harmonized as EN IEC 62474
ISO/IEC Guide 2:2004 NOTE Harmonized as EN 45020:2006 (not modified)
ISO 9000:2015 NOTE Harmonized as EN ISO 9000:2015 (not modified)
ISO 9001:2015 NOTE Harmonized as EN ISO 9001:2015 (not modified)
ISO 14001:2015 NOTE Harmonized as EN ISO 14001:2015 (not modified)
ISO 14006:2011 NOTE Harmonized as EN ISO 14006:2011 (not modified)
ISO 14040:2006 NOTE Harmonized as EN ISO 14040:2006 (not modified)


2

---------------------- Page: 4 ----------------------
SIST EN IEC 62430:2021



IEC 62430

®


Edition 2.0 2019-10




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE




HORIZONTAL STANDARD

NORME HORIZONTALE




Environmentally conscious design – Principles, requirements and guidance



Écoconception (ECD) – Principes, ex
...