EN 61169-48:2015

Radio-frequency connectors - Part 48: Sectional specification for series BMP R.F. coaxial connectors

IEC 61169-48:2014, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for series BMP RF coaxial connectors with blind mating, typically for use in 50 Ohms board to board connection. They may also be used with RF cables or micro-strips in microwave, telecommunication, wireless and other fields. Their operating frequency limit is up to 6 GHz. It describes the interface dimensions with gauging information, electrical and mechanical performance including the mandatory tests selected from IEC 61169-1:2013 applicable to all DS relating to type BMP connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements.

Hochfrequenz-Steckverbinder - Teil 48: Rahmenspezifikation für koaxiale HF Steckverbinder der BMP-Serie

Connecteurs pour fréquences radioélectriques - Partie 48: Spécification intermédiaire relative aux connecteurs coaxiaux R.F. série BMP

L'IEC 61169-48:2014, qui est une spécification intermédiaire (SI), fournit des informations et des règles en vue de l'établissement de spécifications particulières (SP) relative aux connecteurs coaxiaux pour fréquences radioélectriques, série BMP avec accouplement en aveugle, spécifiquement utilisés dans les connexions carte à carte 50 Ohms. Ils peuvent également être utilisés avec les câbles RF ou les microrubans dans les domaines de l'hyperfréquence, des télécommunications, des liaisons sans fil et autres domaines. La limite de leur fréquence de fonctionnement est inférieure ou égale à 6 GHz. Elle décrit les dimensions d'interface ainsi que les informations concernant les calibres, les performances électriques et mécaniques, y compris les essais obligatoires issus de l'IEC 61169-1:2013, applicables à toutes les SP relatives aux connecteurs de type BMP. La présente spécification indique les caractéristiques de performance recommandées à prendre en compte pour la rédaction d'une SP et elle couvre les programmes d'essais et les exigences de contrôle.

Radiofrekvenčni konektorji - 48. del: Področna specifikacija za koaksialne konektorje serije Bmp R.F. (IEC 61169-48:2014)

Ta del standarda IEC 61169, ki je področna specifikacija (SS), podaja informacije in določa pravila za pripravo podrobnih specifikacij (DS) za radiofrekvenčne koaksialne konektorje serije BMP z zakritimi kontakti, običajno za uporabo v 50-ohmski povezavi med ploščami. Uporabljajo se lahko tudi z radiofrekvenčnimi kabli ali mikrotrakovi pri mikrovalovanju, telekomunikacijah, v brezžičnih omrežjih in na drugih področjih. Omejitev frekvenčnega območja delovanja je do 6 GHz.
Dimenzije vmesnikov opisuje z merjenjem informacij, električne in mehanske zmogljivosti, skupaj z obveznimi preskusi, izbranimi iz standarda IEC 61169-1:2013, ki se uporabljajo za vse podrobne specifikacije v zvezi s konektorji vrste BMP.
Ta specifikacija določa priporočene lastnosti, ki jih je treba upoštevati pri sestavljanju podrobnih specifikacij, ter zajema urnike preskusov in zahteve za pregled.
OPOMBA: Izvirne mere so podane v metričnih merah. Vse nedimenzionirane slikovne konfiguracije so podane samo v referenčne namene.

General Information

• Status: Published
• Publication Date: 12-Mar-2015
• Withdrawal Date: 26-Nov-2017
• ICS: 33.120.30 - RF connectors
• Technical Committee: CLC/SR 46F - RF and microwave passive components
• Drafting Committee: IEC/SC 46F - IEC_SC_46F
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 13-Mar-2015
• Completion Date: 13-Mar-2015
• Ref Project: SIST EN 61169-48:2015 - Radio-Frequency Connectors -- Part 48: Sectional Specification For Series Bmp R.F. Coaxial Connectors (IEC 61169-48:2014)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61169-48:2015
01-oktober-2015
5DGLRIUHNYHQþQLNRQHNWRUMLGHO3RGURþQDVSHFLILNDFLMD]DNRDNVLDOQH
NRQHNWRUMHVHULMH%PS5),(&
Radio-Frequency Connectors -- Part 48: Sectional Specification For Series Bmp R.F.
Coaxial Connectors (IEC 61169-48:2014)
Hochfrequenz-Steckverbinder - Teil 48: Rahmenspezifikation für koaxiale HF
Steckverbinder der BMP-Serie (IEC 61169-48:2014)
Connecteurs pour fréquences radioélectriques - Partie 48: Spécification intermédiaire
pour connecteurs coaxiaux R.F. série BMP (IEC 61169-48:2014)
Ta slovenski standard je istoveten z: EN 61169-48:2015
ICS:
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML R.F. connectors
5)
SIST EN 61169-48:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61169-48:2015

---------------------- Page: 2 ----------------------

SIST EN 61169-48:2015


EUROPEAN STANDARD EN 61169-48

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2015
ICS 33.120.30

English Version
Radio-frequency connectors - Part 48: Sectional specification for
series BMP R.F. coaxial connectors
(IEC 61169-48:2014)
Connecteurs pour fréquences radioélectriques - Partie 48: Hochfrequenz-Steckverbinder - Teil 48:
Spécification intermédiaire relative aux connecteurs Rahmenspezifikation für koaxiale HF Steckverbinder der
coaxiaux R.F. série BMP BMP-Serie
(IEC 61169-48:2014) (IEC 61169-48:2014)
This European Standard was approved by CENELEC on 2014-11-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61169-48:2015 E

---------------------- Page: 3 ----------------------

SIST EN 61169-48:2015
EN 61169-48:2015 - 2 -
Foreword
The text of document 46F/253/CDV, future edition 1 of IEC 61169-48, prepared by SC 46F "R.F. and
microwave passive components", of IEC/TC 46 "Cables, wires, waveguides, R.F. connectors, R.F. and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 61169-48:2015.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2015-09-13
national level by publication of an identical national
standard or by endorsement
(dow) 2017-11-27
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61169-48:2014 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61169-48:2015
- 3 - EN 61169-48:2015
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here
...