iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 62309:2004

(Main)

Dependability of products containing reused parts - Requirements for functionality and tests

Dependability of products containing reused parts - Requirements for functionality and tests

Introduces the concept to check the reliability and functionality of reused parts and their usage within new products. Also provides information and criteria about the tests/analysis required for products containing such reused parts, which are declared qualified-as-good-as-new relative to the designed life of the product. The purpose of this standard is to ensure by tests and analysis that the reliability and functionality of a new product containing reused parts is comparable to a product with only new parts.

Zuverlässigkeit von Produkten mit wieder verwendeten Teilen - Anforderungen an Funktionalität und Prüfungen

Sûreté de fonctionnement des produits contenant des composants réutilisés - Exigences pour la fonctionalité et les essais

Introduit le concept de la vérification de la fiabilité et de la fonctionnalité des composants réutilisés et de leur utilisation dans des produits. Fournit aussi des informations et des critères pour les tests/analyses prescrits pour les produits contenant de tels composants réutilisés et qui sont déclarés qualifiés bons comme neufs relativement à la durée de vie conçue du produit. L'objet de la présente norme est d'assurer par des tests et des analyses que la fiabilité et la fonctionnalité des nouveaux produits contenant des composants réutilisés est comparable à celle d'un produit ne contenant que des composants neufs.

Zagotovljivost izdelkov, ki vsebujejo rabljene dele - Zahteve za funkcionalnost in preskušanje (IEC 62309:2004)

General Information

Status
Published
Publication Date
04-Oct-2004
Withdrawal Date
31-Aug-2007
ICS
03.120.30 - Application of statistical methods
21.020 - Characteristics and design of machines, apparatus, equipment
Technical Committee
CLC/SR 56 - Dependability
Drafting Committee
IEC/TC 56 - IEC_TC_56
Parallel Committee
IEC/TC 56 - IEC_TC_56
Current Stage
6060 - Document made available - Publishing
Start Date
05-Oct-2004
Completion Date
05-Oct-2004
Ref Project
SIST EN 62309:2007 - Dependability of products containing reused parts - Requirements for functionality and tests

Buy Standard

EN 62309:2007EN 62309:2007
PreviousNext
Standard
EN 62309:2007
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62309:2007
01-januar-2007
Zagotovljivost izdelkov, ki vsebujejo rabljene dele - Zahteve za funkcionalnost in
preskušanje (IEC 62309:2004)
Dependability of products containing reused parts - Requirements for functionality and
tests
Zuverlässigkeit von Produkten mit wieder verwendeten Teilen - Anforderungen an
Funktionalität und Prüfungen
Sûreté de fonctionnement des produits contenant des composants réutilisés - Exigences
pour la fonctionalité et les essais
Ta slovenski standard je istoveten z: EN 62309:2004
ICS:
03.120.01 Kakovost na splošno Quality in general
21.020 =QDþLOQRVWLLQQDþUWRYDQMH Characteristics and design of
VWURMHYDSDUDWRYRSUHPH machines, apparatus,
equipment
SIST EN 62309:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62309:2007

---------------------- Page: 2 ----------------------

SIST EN 62309:2007
EUROPEAN STANDARD EN 62309
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2004

ICS 03.120.30 ; 21.020


English version


Dependability of products containing reused parts –
Requirements for functionality and tests
(IEC 62309:2004)


Sûreté de fonctionnement des produits Zuverlässigkeit von Produkten
contenant des composants réutilisés - mit wieder verwendeten Teilen –
Exigences pour la fonctionalité Anforderungen an Funktionalität
et les essais und Prüfungen
(CEI 62309:2004) (IEC 62309:2004)






This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 62309:2004 E

---------------------- Page: 3 ----------------------

SIST EN 62309:2007
EN 62309:2004 - 2 -
Foreword
The text of document 56/945/FDIS, future edition 1 of IEC 62309, prepared by IEC TC 56,
Dependability, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 62309 on 2004-09-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62309:2004 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
ISO 9000 NOTE Harmonized as EN ISO 9000:2000 (not modified).
ISO 9001 NOTE Harmonized as EN ISO 9001:2000 (not modified).
IEC 60300-1 NOTE Harmonized as EN 60300-1:2003 (not modified).
IEC 60300-2 NOTE Harmonized as EN 60300-1:2004 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 62309:2007
- 3 - EN 62309:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-191 1990 International Electrotechnical Vocabulary - -
(IEV)
Chapter 191: Dependability and quality of
service

---------------------- Pa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61124:2023(Main)
Reliability testing - Compliance tests for constant failure rate and constant failure intensity
SIST EN IEC 61124:2023

This International Standard gives a number of optimized test plans, the corresponding border lines and characteristics. In addition the algorithms for designing test plans using a spreadsheet program are also given, together with guidance on how to choose test plans. This standard specifies procedures to test whether an observed value of - failure rate, - failure intensity, - mean operating time to failure (MTTF), - mean operating time between failures (MTBF), conforms to a given requirement. It is assumed, except where otherwise stated, that during the accumulated test time, the times to failure or the operating times between failures are independent and identically exponentially distributed. This assumption implies that the failure rate or failure intensity is assumed to be constant. Four types of test plans are described as follows: - truncated sequential probability ratio test (SPRT); - fixed time/failure terminated test (FTFT); - fixed calendar time terminated test without replacement; - combined test. This standard does not cover guidance on how to plan, perform, analyse and report a test. This information can be found in IEC 60300-3-5. This standard does not describe test conditions. This information can be found in IEC 60605-2 and in IEC 60300-3-5.

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61123:2020(Main)
Reliability testing - Compliance test plans for success ratio
SIST EN IEC 61123:2020

IEC 61123:2019 is intended to define a procedure to verify if a reliability of an item/system complies with the stated requirements. The requirement is assumed to be specified as the percentage of success (success ratio) or the percentage of failures (failure ratio). This document can be used where a number of items are tested (number of trials performed) and classified as passed or failed. It can also be used where one or a number of items are tested repeatedly. The procedures are based on the assumption that the probability of success or failure is the same from trial to trial (statistically independent events). Plans for fixed trial/failure terminated tests as well as truncated sequential probability ratio tests (SPRTs) are included. This document contains extensive tables with ready-to-use SPRT plans and their characteristics for equal and non-equal risks for supplier and customer. In the case of the reliability compliance tests for constant failure rate/intensity, IEC 61124 applies. This second edition cancels and replaces the first edition published in 1991. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: The sequential probability ratio test (SPRT) [1, 2][1] has been significantly developed in recent years [3, 4, 5]. This edition contains shorter and accurate tests, a wide range of test plans, and significant additional characteristic data, as follows: the tests are significantly truncated (the maximum trial numbers are low) without substantially increasing the expected number of trials to decision (ENT); the true producer’s and consumer’s risks (α', β') are given and very close to the nominal (α, β); the range of the test parameters is wide (failure ratio, risks and discrimination ratio); the test plans include various risk ratios (not restricted to equal risks only); the values of ENT are accurate and given in the relevant region (for practical use); guidelines for extension of the test sets (interpolation and extrapolation) are included. In Annex C, the use of the cumulative binomial distribution function of Excel that simplifies the procedure of designing has been added (Clause C.3). Keywords: verify if a reliability of an item/system complies with the stated requirements

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60812:2018(Main)
Failure modes and effects analysis (FMEA and FMECA)
SIST EN IEC 60812:2018

IEC 60812:2018 explains how failure modes and effects analysis (FMEA), including the failure modes, effects and criticality analysis (FMECA) variant, is planned, performed, documented and maintained. The purpose of failure modes and effects analysis (FMEA) is to establish how items or processes might fail to perform their function so that any required treatments could be identified. An FMEA provides a systematic method for identifying modes of failure together with their effects on the item or process, both locally and globally. It may also include identifying the causes of failure modes. Failure modes can be prioritized to support decisions about treatment. Where the ranking of criticality involves at least the severity of consequences, and often other measures of importance, the analysis is known as failure modes, effects and criticality analysis (FMECA). This document is applicable to hardware, software, processes including human action, and their interfaces, in any combination. An FMEA can be used in a safety analysis, for regulatory and other purposes, but this being a generic standard, does not give specific guidance for safety applications. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition: a) the normative text is generic and covers all applications; b) examples of applications for safety, automotive, software and (service) processes have been added as informative annexes; c) tailoring the FMEA for different applications is described; d) different reporting formats are described, including a database information system; e) alternative means of calculating risk priority numbers (RPN) have been added; f) a criticality matrix based method has been added; g) the relationship to other dependability analysis methods have been described. Keywords: failure modes and effects analysis (FMEA), failure modes effects and criticality analysis (FMECA)

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61703:2016(Main)
Mathematical expressions for reliability, availability, maintainability and maintenance support terms
SIST EN 61703:2017

IEC 61703:2016 provides mathematical expressions for selected reliability, availability, maintainability and maintenance support measures defined in IEC 60050­192:2015. In addition, it introduces some terms not covered in IEC 60050-192:2015. They are related to aspects of the system of item classes (see hereafter). According to IEC 60050-192:2015, dependability [192-01-22] is the ability of an item to perform as and when required and an item [192-01-01] can be an individual part, component, device, functional unit, equipment, subsystem, or system. To account for mathematical constraints, this standard splits the items between the individual items considered as a whole (e.g. individual components) and the systems made of several individual items. It provides general considerations for the mathematical expressions for systems as well as individual items but the individual items which are easier to model are analysed in more detail with regards to their repair aspects. This standard is mainly applicable to hardware dependability, but many terms and their definitions may be applied to items containing software. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - standard made as self containing as possible; - item split between individual items and systems; - generalization of the dependability concepts for systems made of several components [introduction of the conditional failure intensity (Vesely failure rate); - introduction of the state-transition and the Markovian models; - generalization of the availability to production availability]; - introduction of curves to illustrate the various concepts. Keywords: mathematical expressions for dependability

  • Standard
    101 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    101 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61124:2012(Main)
Reliability testing - Compliance tests for constant failure rate and constant failure intensity
SIST EN 61124:2012

IEC 61124:2012 gives a number of optimized test plans, the corresponding operating characteristic curves and expected test times. In addition the algorithms for designing test plans using a spreadsheet program are also given, together with guidance on how to choose test plans. This standard specifies procedures to test whether an observed value of: failure rate, failure intensity, meantime to failure (MTTF), and mean operating time between failures (MTBF). The main changes with respect to the previous edition are as follows: - A number of new test plans have been added based on the Russian standard GOST R 27.402 [1], and it is intended to align the new edition of MIL-HDBK-781 [2] with this edition. Algorithms for optimizing test plans using a spreadsheet program are given and a number of optimized test plans are listed. Furthermore, emphasis is laid on the fact that the test should be repeated following design changes; - Discrepancies in test plans A, B as well as Annexes A and B that originated in IEC 60605-7 [3], now withdrawn, have been corrected so these test plans differ from those given in previous editions of IEC 61124. As requested by the National Committees, mathematical background material and spreadsheet program information has been moved to informative annexes. In addition, the symbol lists have been divided, so that some annexes have separate lists of symbols; - Guidance on how to choose test plans has been added as well as guidance on how to use spreadsheet programs to create them. Test plans A.1 to A.9 and B.1 to B.13 have been corrected; - Subcluses 8.1, 8.2, 8.3, Clause 9, Annex C, Clauses G.2, I.2, I.3 and Annex J are unchanged, except for updated terminology and references.

  • Standard
    125 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60300-3-12:2011(Main)
Dependability management - Part 3-12: Application guide - Integrated logistic support
SIST EN 60300-3-12:2011

IEC 60300-3-12:2011 is an application guide for establishing an integrated logistic support (ILS) management system. It is intended to be used by a wide range of suppliers including large and small companies wishing to offer a competitive and quality item which is optimized for the purchaser and supplier for the complete life cycle of the item. It also includes common practices and logistic data analyses that are related to ILS. This edition includes the following significant technical changes with respect to the previous edition:
- provision of a better overview of the whole ILS process;
- updating of the document to align with associated dependability standards that were introduced after the previous edition.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60706-5:2007(Main)
Maintainability of equipment - Part 5: Testability and diagnostic testing
SIST EN 60706-5:2008

This guide has for purpose to provide guidance for the early consideration of testability aspects in design and development, and to assist in determining effective test procedures as an integral part of operation and maintenance. This second edition constitutes a technical revision. It expands and provides more detail on the techniques and systems broadly outlined in the first edition.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61163-1:2006(Main)
Reliability stress screening - Part 1: Repairable assemblies manufactured in lots
SIST EN 61163-1:2008

This part of IEC 61163 describes particular methods to apply and optimize reliability stress screening processes for lots of repairable hardware assemblies, in cases where the assemblies have an unacceptably low reliability in the early failure period, and when other methods, such as reliability growth programmes and quality control techniques, are not applicable.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61165:2006(Main)
Application of Markov techniques
SIST EN 61165:2007

This International Standard provides guidance on the application of Markov techniques to model and analyze a system and estimate reliability, availability, maintainability and safety measures. This standard is applicable to all industries where systems, which exhibit state-dependent behaviour, have to be analyzed. The Markov techniques covered by this standard assume constant time-independent state transition rates. Such techniques are often called homogeneous Markov techniques.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60300-3-1:2004(Main)
Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
SIST EN 60300-3-1:2007

Gives a general overview of commonly used dependability analysis techniques. It describes the usual methodologies, their advantages and disadvantages, data input and other conditions for using various techniques. It is an introduction to selected methodologies and is intended to provide the necessary information for choosing the most appropriate analysis methods.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day