EN IEC 62660-1:2019

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing

IEC 62660-1:2018 is available as IEC 62660-1:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62660-1:2018 specifies performance and life testing of secondary lithium-ion cells used for propulsion of electric vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV). This document specifies the test procedures to obtain the essential characteristics of lithium-ion cells for vehicle propulsion applications regarding capacity, power density, energy density, storage life and cycle life. This document provides the standard test procedures and conditions for testing basic performance characteristics of lithium-ion cells for vehicle propulsion applications, which are indispensable for securing a basic level of performance and obtaining essential data on cells for various designs of battery systems and battery packs. IEC 62660-1:2018 cancels and replaces the first edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) The purpose of each test has been added. b) The power test has been revised for clarification, and an informative part of the current-voltage characteristic test has been moved to the new Annex C.

Lithium-Ionen-Sekundärzellen für den Antrieb von Elektrostraßenfahrzeugen - Teil 1: Prüfung des Leistungsverhaltens

Eléments d'accumulateurs lithium-ion pour la propulsion des véhicules routiers électriques - Partie 1: Essais de performance

IEC 62660-1:2018 est disponible sous forme de IEC 62660-1:2018 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62660-1:2018 spécifie les essais de performance et de durée de vie des accumulateurs lithium-ion utilisés pour la propulsion des véhicules électriques, incluant les véhicules électriques à batterie (BEV) et les véhicules électriques hybrides (HEV). Le présent document spécifie les procédures d'essai afin d’obtenir les caractéristiques essentielles des éléments lithium-ion destinés aux applications de propulsion de véhicules; ces caractéristiques concernent la capacité, la densité de puissance, la densité d'énergie, la durée de stockage et la durée de vie. Le présent document spécifie les procédures d'essai et les conditions normalisées pour effectuer les essais des caractéristiques de performance fondamentales des éléments lithium-ion destinés aux applications de propulsion de véhicules; ces caractéristiques sont indispensables pour fixer un niveau de performance de base et obtenir des données essentielles pour différentes conceptions de systèmes de batteries et de packs de batteries. L'IEC 62660-1:2018 annule et remplace la première édition parue en 2010. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) L’objet de chaque essai a été ajouté. b) L’essai de puissance a été révisé pour clarification, et une partie informative de l’essai des caractéristiques courant-tension a été transférée à la nouvelle Annexe C.

Sekundarni litij-ionski členi za pogon električnih cestnih vozil - 1. del: Preskušanje zmogljivosti

Ta del standarda IEC 62660 določa preskušanje zmogljivosti in življenjske dobe sekundarnih litij-ionskih členov za pogon električnih vozil, vključno z električnimi akumulatorskimi vozili (BEV) in hibridnimi električnimi vozili (HEV).
OPOMBA 1: Sekundarni litij-ionski člen za pogon priključnega hibridnega električnega vozila (PHEV) je mogoče preskusiti s postopkom uporabe BEV ali uporabe HEV v skladu z zasnovo baterijskega sistema na podlagi dogovora med proizvajalcem členov in kupcem.
Ta dokument določa preskusne postopke za pridobitev osnovnih lastnosti litij-ionskih členov za pogon vozil v povezavi z zmogljivostjo, gostoto porazdelitve moči, gostoto porazdelitve energije, obdobjem skladiščenja in življenjsko dobo.
Ta dokument podaja standardne preskusne postopke in pogoje za preskušanje osnovnih lastnosti zmogljivosti litij-ionskih členov za pogon vozil, ki so nepogrešljive za zagotavljanje osnovne ravni zmogljivosti in pridobivanje osnovnih podatkov o členih za različne zasnove baterijskih sistemov ter akumulatorjev.
OPOMBA 2: Na podlagi dogovora med proizvajalcem člena in kupcem je mogoče poleg pogojev, določenih v tem dokumentu, izbrati posebne preskusne pogoje. Selektivni preskusni pogoji so opisani v dodatku A.
OPOMBA 3: Preskusi zmogljivosti električno povezanih litij-ionskih členov je mogoče opraviti s sklicevanjem na ta dokument.
OPOMBA 4: Specifikacija preskusa za litij-ionske akumulatorje in sisteme je opredeljena v standardu ISO 12405-4 [1].

General Information

• Status: Published
• Publication Date: 14-Feb-2019
• Withdrawal Date: 15-Jan-2022
• ICS: 29.220.20 - Acid secondary cells and batteries
• ICS: 43.120 - Electric road vehicles
• Technical Committee: CLC/TC 21X - Secondary cells and batteries
• Drafting Committee: IEC/TC 21 - IEC_TC_21
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-Feb-2019
• Completion Date: 15-Feb-2019
• Ref Project: SIST EN IEC 62660-1:2019 - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing

Relations

• Replaces: EN 62660-1:2011 - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing
• Effective Date: 17-Oct-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62660-1:2019
01-maj-2019
1DGRPHãþD
SIST EN 62660-1:2011
6HNXQGDUQLOLWLMLRQVNLþOHQL]DSRJRQHOHNWULþQLKFHVWQLKYR]LOGHO3UHVNXãDQMH
]PRJOMLYRVWL
Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1:
Performance testing
Lithium-Ionen-Sekundärzellen für den Antrieb von Elektrostraßenfahrzeugen - Teil 1:
Prüfung des Leistungsverhaltens
Eléments d'accumulateurs lithium-ion pour la propulsion des véhicules routiers
électriques - Partie 1: Essais de performance
Ta slovenski standard je istoveten z: EN IEC 62660-1:2019
ICS:
29.220.20 .LVOLQVNLVHNXQGDUQLþOHQLLQ Acid secondary cells and
EDWHULMH batteries
43.120 (OHNWULþQDFHVWQDYR]LOD Electric road vehicles
SIST EN 62660-1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62660-1:2019

---------------------- Page: 2 ----------------------

SIST EN 62660-1:2019


EUROPEAN STANDARD EN IEC 62660-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2019
ICS 29.220.20; 43.120 Supersedes EN 62660-1:2011
English Version
Secondary lithium-ion cells for the propulsion of electric road
vehicles - Part 1: Performance testing
(IEC 62660-1:2018)
Eléments d'accumulateurs lithium-ion pour la propulsion Lithium-Ionen-Sekundärzellen für den Antrieb von
des véhicules routiers électriques - Partie 1: Essais de Elektrostraßenfahrzeugen - Teil 1: Prüfung des
performance Leistungsverhaltens
(IEC 62660-1:2018) (IEC 62660-1:2018)
This European Standard was approved by CENELEC on 2019-01-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62660-1:2019 E

---------------------- Page: 3 ----------------------

SIST EN 62660-1:2019
EN IEC 62660-1:2019 (E)
European foreword
The text of document 21/975/FDIS, future edition 2 of IEC 62660-1, prepared by IEC/TC 21
"Secondary cells and batteries" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62660-1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-10-16
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-01-16
document have to be withdrawn

This document supersedes EN 62660-1:2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62660-1:2018 was approved by CENELEC as a European
Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62660-2 NOTE Harmonized as EN 62660-2
IEC 62660-3 NOTE Harmonized as EN 62660-3
IEC 61434:1996 NOTE Harmonized as EN 61434:1996 (not modified)

2

---------------------- Page: 4 ----------------------

SIST EN 62660-1:2019
EN IEC 62660-1:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced documen
...

SLOVENSKI STANDARD
SIST EN IEC 62660-1:2019
01-maj-2019
Nadomešča:
SIST EN 62660-1:2011
Sekundarni litij-ionski členi za pogon električnih cestnih vozil - 1. del: Preskušanje
zmogljivosti
Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1:
Performance testing
Lithium-Ionen-Sekundärzellen für den Antrieb von Elektrostraßenfahrzeugen - Teil 1:
Prüfung des Leistungsverhaltens
Eléments d'accumulateurs lithium-ion pour la propulsion des véhicules routiers
électriques - Partie 1: Essais de performance
Ta slovenski standard je istoveten z: EN IEC 62660-1:2019
ICS:
29.220.20 Kislinski sekundarni členi in Acid secondary cells and
baterije batteries
43.120 Električna cestna vozila Electric road vehicles
SIST EN IEC 62660-1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62660-1:2019

---------------------- Page: 2 ----------------------
SIST EN IEC 62660-1:2019


EUROPEAN STANDARD EN IEC 62660-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2019
ICS 29.220.20; 43.120 Supersedes EN 62660-1:2011
English Version
Secondary lithium-ion cells for the propulsion of electric road
vehicles - Part 1: Performance testing
(IEC 62660-1:2018)
Eléments d'accumulateurs lithium-ion pour la propulsion Lithium-Ionen-Sekundärzellen für den Antrieb von
des véhicules routiers électriques - Partie 1: Essais de Elektrostraßenfahrzeugen - Teil 1: Prüfung des
performance Leistungsverhaltens
(IEC 62660-1:2018) (IEC 62660-1:2018)
This European Standard was approved by CENELEC on 2019-01-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62660-1:2019 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62660-1:2019
EN IEC 62660-1:2019 (E)
European foreword
The text of document 21/975/FDIS, future edition 2 of IEC 62660-1, prepared by IEC/TC 21
"Secondary cells and batteries" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62660-1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-10-16
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-01-16
document have to be withdrawn

This document supersedes EN 62660-1:2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62660-1:2018 was approved by CENELEC as a European
Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62660-2 NOTE Harmonized as EN 62660-2
IEC 62660-3 NOTE Harmonized as EN 62660-3
IEC 61434:1996 NOTE Harmonized as EN 61434:1996 (not modified)

2

---------------------- Page: 4 ----------------------
SIST EN IEC 62660-1:2019
EN IEC 62660-1:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the
...