EN 62841-3-4:2016
(Main)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
IEC 62841-3-4:2016 applies to transportable bench grinders that can be equipped with one or two accessories as follows: - type 1 grinding wheels in accordance with ISO 603-4:1999 with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; - wire brushes with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; - polishing wheels with a diameter not exceeding 310 mm and with a peripheral speed of any accessory between 10 m/s and 50 m/s. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication Keywords: Bench Grinder, Hand-held tool, Transportable tool This publication is to be read in conjunction with IEC 62841-1:2014.
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-4: Besondere Anforderungen für transportable Tischschleifmaschinen
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-4: Exigences particulières pour les tourets à meuler transportables
IEC 62841-3-4:2016 applies to transportable bench grinders that can be equipped with one or two accessories as follows: - type 1 grinding wheels in accordance with ISO 603-4:1999 with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; - wire brushes with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; - polishing wheels with a diameter not exceeding 310 mm and with a peripheral speed of any accessory between 10 m/s and 50 m/s. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication Keywords: Bench Grinder, Hand-held tool, Transportable tool This publication is to be read in conjunction with IEC 62841-1:2014.
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-4. del: Posebne zahteve za prenosne namizne brusilnike (IEC 62841-3-4:2016)
Ta točka 1. dela se uporablja, razen kot sledi:
Dodatek:
Ta del standarda IEC 62841 se uporablja za prenosne namizne brusilnike, ki jih je mogoče opremiti z enim ali dvema od naslednjih priključkov:
– brusni koluti tipa 1 v skladu s standardom ISO 603-4:1999 s premerom največ 310 mm in debelino največ 55 mm;
– žične krtače s premerom največ 310 mm in debelino največ 55 mm;
– polirni koluti s premerom največ 310 mm;
pri čemer mora biti vrednost periferne hitrosti katerega koli priključka od 10 m/s do 50 m/s.
OPOMBA: polirni koluti se imenujejo tudi koluti za brušenje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62841-3-4:2016
01-september-2016
1DGRPHãþD
SIST EN 61029-2-4:2011
(OHNWURPRWRUQDURþQDRURGMDSUHQRVQDRURGMDWHUVWURML]DWUDWRLQYUW9DUQRVW
GHO 3RVHEQH]DKWHYH]DSUHQRVQHQDPL]QHEUXVLOQLNH ,(&
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden
Machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
(IEC 62841-3-4:2016)
Ta slovenski standard je istoveten z: EN 62841-3-4:2016
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 62841-3-4:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62841-3-4:2016
---------------------- Page: 2 ----------------------
SIST EN 62841-3-4:2016
EUROPEAN STANDARD EN 62841-3-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2016
ICS 25.140.20 Supersedes EN 61029-2-4:2011
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-4: Particular
requirements for transportable bench grinders
(IEC 62841-3-4:2016 , modified)
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 3-4: Exigences transportable Werkzeuge und Rasen- und
particulières pour les tourets à meuler transportables Gartenmaschinen - Sicherheit - Teil 3-4: Besondere
(IEC 62841-3-4:2016 , modifiée) Anforderungen für transportable Tischschleifmaschinen
(IEC 62841-3-4:2016 , modifiziert)
This European Standard was approved by CENELEC on 2016-03-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62841-3-4:2016 E
---------------------- Page: 3 ----------------------
SIST EN 62841-3-4:2016
EN 62841-3-4:2016
European foreword
The text of document 116/258/FDIS, future edition 1 of IEC 62841-3-4, prepared by IEC/TC 116 "Safety
of motor-operated electric tools" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62841-3-4:2016.
A draft amendment, which covers common modifications to IEC 62841-3-4:2016 (116/258/FDIS), was
prepared by CLC/TC 116 "Safety of motor-operated electric tools" and approved by CENELEC.
The following dates are fixed:
• latest date by which this document has to be implemented (dop) 2016-12-24
at national level by publication of an identical
national standard or by endorsement
(dow) 2020-06-24
• latest date by which the national standards conflicting
with this document have to be withdrawn
This document supersedes EN 61029-2-4:2011.
This European Standard is divided into four parts:
Part 1: General requirements which are common to most hand-held electric motor operated tools
(for the purpose of this standard referred to simply as tools) which could come within the
scope of this standard;
Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the
requirements given in Part 1 to account for the particular hazards and characteristics of
these specific tools.
This Part 3-4 is to be used in conjunction with EN 62841-1:2015.
This Part 3-4 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as to convert it
into the European Standard: Particular requirements for transportable bench grinders.
Where a particular subclause of Part 1 is not mentioned in this Part 3-4, that s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.