EN 61165:2006
(Main)Application of Markov techniques
Application of Markov techniques
This International Standard provides guidance on the application of Markov techniques to model and analyze a system and estimate reliability, availability, maintainability and safety measures. This standard is applicable to all industries where systems, which exhibit state-dependent behaviour, have to be analyzed. The Markov techniques covered by this standard assume constant time-independent state transition rates. Such techniques are often called homogeneous Markov techniques.
Anwendung des Markoff-Verfahrens
Application des techniques de Markov
Cette Norme internationale fournit un guide sur l'application des techniques de Markov pour analyser et modéliser un système, et estimer la fiabilité, la disponibilité, la maintenabilité et les mesures de sécurité. Cette norme est applicable à toutes les industries où les systèmes, qui présentent un comportement dépendant de leur état, doivent être analysés. Les techniques de Markov couvertes par cette norme supposent des fréquences de changement d'état constantes, indépendantes du temps. De telles techniques sont souvent appelées globalement 'techniques de Markov'.
Uporaba tehnik Markov (IEC 61165:2006)
General Information
Standards Content (Sample)
6/29(16., 6,67(1
67$1'$5'
MDQXDU
8SRUDEDWHKQLN0DUNRY ,(&
LVWRYHWHQ(1
$SSOLFDWLRQRI0DUNRYWHFKQLTXHV ,(&
,&6 5HIHUHQþQDãWHYLOND
6,67(1 HQ
!"#$%&’( )&!*+,%- .
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 61165
NORME EUROPÉENNE
July 2006
EUROPÄISCHE NORM
ICS 03.120.01; 03.12.30; 21.020
English version
Application of Markov techniques
(IEC 61165:2006)
Application des techniques de Markov Anwendung des Markoff-Verfahrens
(CEI 61165:2006) (IEC 61165:2006)
This European Standard was approved by CENELEC on 2006-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61165:2006 E
---------------------- Page: 2 ----------------------
EN 61165:2006 - 2 -
Foreword
The text of document 56/1096/FDIS, future edition 2 of IEC 61165, prepared by IEC TC 56,
Dependability, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61165 on 2006-07-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61165:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60812 NOTE Harmonized as EN 60812:2006 (not modified).
IEC 61078 NOTE Harmonized as EN 61078:2006 (not modified).
__________
---------------------- Page: 3 ----------------------
- 3 - EN 61165:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60050-191 1990 International Electrotechnical Vocabulary - -
(IEV)
Chapter 191: Dependability and quality of
service
1) 2)
IEC 60300-3-1 - Dependability management EN 60300-3-1 2004
Part 3-1: Application guide - Analysis
techniques for dependability - Guide on
methodology
IEC 61508-4 1998 Functional safety of EN 61508-4 2001
+ corr. April 1999 electrical/electronic/programmable electronic
safety-related systems
Part 4: Definitions and abbreviations
1)
Undated reference.
2)
Valid edition at date of issue.
---------------------- Page: 4 ----------------------
NORME CEI
INTERNATIONALE
IEC
61165
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2006-05
Application des techniques de Markov
Application of Markov techniques
IEC 2006 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou méc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.