iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 60749-13:2018

(Main)

Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere

Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere

IEC 60749-13:2018 describes a salt atmosphere test that determines the resistance of semiconductor devices to corrosion. It is an accelerated test that simulates the effects of severe sea-coast atmosphere on all exposed surfaces. It is only applicable to those devices specified for a marine environment. The salt atmosphere test is considered destructive. This edition includes the following significant technical changes with respect to the previous edition: a) alignment with MIL-STD-883J Method 1009.8, Salt Atmosphere (Corrosion), including information on conditioning and maintenance of the test chamber and mounting of test specimens (including explanatory figures).

Halbleiterbauelemente - Mechanische und klimatische Prüfverfahren - Teil 13: Salzatmosphäre

Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 13: Atmosphère saline

L’IEC 60749-13:2018 décrit un essai d’atmosphère saline réalisé pour déterminer la résistance à la corrosion des dispositifs à semiconducteurs. Il s’agit d’un essai accéléré qui simule les effets d’une atmosphère côtière corrosive sur toutes les surfaces exposées. Il n’est applicable qu’aux dispositifs spécifiés pour un environnement maritime. L’essai d’atmosphère saline est considéré comme destructif. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) alignement avec la norme MIL-STD-883J, Method 1009.8, Salt Atmosphere (Corrosion), y compris les informations sur le conditionnement et la maintenance de la chambre d’essai et sur le montage des spécimens d’essais (y compris les figures explicatives).

Polprevodniški elementi - Metode za mehansko in klimatsko preskušanje - 13. del: Solna atmosfera (IEC 60749-13:2018)

Ta del standarda IEC 60749 opisuje preskus v solni atmosferi, ki določa odpornost polprevodniških naprav proti koroziji. To je pospešeno preskušanje, ki simulira vplive hude oblike atmosfere ob morski obali na vse izpostavljene površine. Uporablja se samo za tiste elemente, ki so namenjeni uporabi v morskem okolju.
Preskus v solni atmosferi se obravnava kot porušitveni.

General Information

Status
Published
Publication Date
12-Apr-2018
Withdrawal Date
21-Mar-2021
ICS
31.080.01 - Semiconductor devices in general
Technical Committee
CLC/SR 47 - Semiconductor devices
Drafting Committee
IEC/TC 47 - IEC_TC_47
Current Stage
6060 - Document made available - Publishing
Start Date
13-Apr-2018
Completion Date
13-Apr-2018
Ref Project
SIST EN IEC 60749-13:2018 - Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere (IEC 60749-13:2018)

Relations

Replaces
EN 60749-13:2002 - Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere
Effective Date
07-Mar-2017

Buy Standard

EN IEC 60749-13:2018EN IEC 60749-13:2018
PreviousNext
Standard
EN IEC 60749-13:2018
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60749-13:2018
01-junij-2018
1DGRPHãþD
SIST EN 60749-13:2004
Polprevodniški elementi - Metode za mehansko in klimatsko preskušanje - 13. del:
Solna atmosfera (IEC 60749-13:2018)
Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt
atmosphere (IEC 60749-13:2018)
Halbleiterbauelemente - Mechanische und klimatische Prüfverfahren - Teil 13:
Salzatmosphäre (IEC 60749-13:2018)
Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie
13: Atmosphère saline (IEC 60749-13:2018)
Ta slovenski standard je istoveten z: EN IEC 60749-13:2018
ICS:
19.060 Mehansko preskušanje Mechanical testing
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
SIST EN IEC 60749-13:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 60749-13:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 60749-13:2018


EUROPEAN STANDARD EN IEC 60749-13

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2018
ICS 31.080.01 Supersedes EN 60749-13:2002
English Version
Semiconductor devices - Mechanical and climatic test methods -
Part 13: Salt atmosphere
(IEC 60749-13:2018)
Dispositifs à semiconducteurs - Méthodes d'essais Halbleiterbauelemente - Mechanische und klimatische
mécaniques et climatiques - Partie 13: Atmosphère saline Prüfverfahren - Teil 13: Salzatmosphäre
(IEC 60749-13:2018) (IEC 60749-13:2018)
This European Standard was approved by CENELEC on 2018-03-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60749-13:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 60749-13:2018
EN IEC 60749-13:2018 (E)

European foreword
The text of document 47/2446/FDIS, future edition 2 of IEC 60749-13, prepared by IEC/TC 47
"Semiconductor devices" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60749-13:2018.

The following dates are fixed:
(dop) 2018-12-22
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-03-22
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60749-13:2002.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60749-13:2018 was approved by CENELEC as a European
Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN IEC 60749-13:2018
EN IEC 60749-13:2018 (E)

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.

NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2  Up-to-date information on the latest versions of the European Standa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60749-5:2024(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test
SIST EN IEC 60749-5:2024

IEC 60749-5:2023 is available as IEC 60749-5:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-5:2023 provides a steady-state temperature and humidity bias life test to evaluate the reliability of non-hermetic packaged semiconductor devices in humid environments. This test method is considered destructive. This edition includes the following significant technical changes with respect to the previous edition: a) The specification of the test equipment is changed to require the need to minimize relative humidity gradients and maximize air flow between semiconductor devices under test; b) The specification of the test equipment fixtures is changed to require the avoidance of condensation on devices under test and on electrical fixtures connecting the devices to the test equipment; c) replacement of references to “virtual junction” with “die”.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63287-2:2023(Main)
Semiconductor devices - Guidelines for reliability qualification plans - Part 2: Concept of mission profile
SIST EN IEC 63287-2:2023

This part of IEC 63287 gives guidelines for the development of reliability qualification plans using the concept of mission profile, based on the environmental conditioning and proposed usage of the product. This document is not intended for military- and space-related applications.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60749-37:2022(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
SIST EN IEC 60749-37:2023

IEC 60749-37:2022 is available as IEC 60749-37:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-37:2022 provides a test method that is intended to evaluate and compare drop performance of surface mount electronic components for handheld electronic product applications in an accelerated test environment, where excessive flexure of a circuit board causes product failure. The purpose is to standardize the test board and test methodology to provide a reproducible assessment of the drop test performance of surface-mounted components while producing the same failure modes normally observed during product level test. This edition includes the following significant technical changes with respect to the previous edition: - correction of a previous technical error concerning test conditions; - updates to reflect improvements in technology.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60749-10:2022(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock - Device and subassembly
SIST EN IEC 60749-10:2022

IEC 60749-10:2022 is intended to evaluate devices in the free state and assembled to printed wiring boards for use in electrical equipment. The method is intended to determine the compatibility of devices and subassemblies to withstand moderately severe shocks. The use of subassemblies is a means to test devices in usage conditions as assembled to printed wiring boards. Mechanical shock due to suddenly applied forces, or abrupt change in motion produced by handling, transportation or field operation can disturb operating characteristics, particularly if the shock pulses are repetitive. This is a destructive test intended for device qualification. This edition cancels and replaces the first edition published in 2002. This edition includes the following significant technical changes with respect to the previous edition:
covers both unattached components and components attached to printed wiring boards;
tolerance limits modified for peak acceleration and pulse duration;
mathematical formulae added for velocity change and equivalent drop height.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60749-28:2022(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic discharge (ESD) sensitivity testing - Charged device model (CDM) - device level
SIST EN IEC 60749-28:2022

IEC 60749-28:2022 is available as IEC 60749-28:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-28:2022 establishes the procedure for testing, evaluating, and classifying devices and microcircuits according to their susceptibility (sensitivity) to damage or degradation by exposure to a defined field-induced charged device model (CDM) electrostatic discharge (ESD). All packaged semiconductor devices, thin film circuits, surface acoustic wave (SAW) devices, opto-electronic devices, hybrid integrated circuits (HICs), and multi-chip modules (MCMs) containing any of these devices are to be evaluated according to this document. To perform the tests, the devices are assembled into a package similar to that expected in the final application. This CDM document does not apply to socketed discharge model testers. This document describes the field-induced (FI) method. An alternative, the direct contact (DC) method, is described in Annex J. The purpose of this document is to establish a test method that will replicate CDM failures and provide reliable, repeatable CDM ESD test results from tester to tester, regardless of device type. Repeatable data will allow accurate classifications and comparisons of CDM ESD sensitivity levels. This edition includes the following significant technical changes with respect to the previous edition: - a new subclause and annex relating to the problems associated with CDM testing of integrated circuits and discrete semiconductors in very small packages; - changes to clarify cleaning of devices and testers.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60749-39:2022(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
SIST EN IEC 60749-39:2022

IEC 60749-39:2021 is available as IEC 60749-39:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-39:2021 details the procedures for the measurement of the characteristic properties of moisture diffusivity and water solubility in organic materials used in the packaging of semiconductor components. These two material properties are important parameters for the effective reliability performance of plastic packaged semiconductors after exposure to moisture and being subjected to high-temperature solder reflow. This edition includes the following significant technical changes with respect to the previous edition: - updated procedure for "dry weight" determination.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63287-1:2021(Main)
Semiconductor devices - Generic semiconductor qualification guidelines - Part 1: Guidelines for IC reliability qualification
SIST EN IEC 63287-1:2021

IEC 63287-1:2021 gives guidelines for reliability qualification plans of semiconductor integrated circuit products. This document is not intended for military- and space-related applications. NOTE 1 The manufacturer can use flexible sample sizes to reduce cost and maintain reasonable reliability by this guideline adaptation based on EDR-4708, AEC Q100, JESD47 or other relevant document can also be applicable if it is specified. NOTE 2 The Weibull distribution method used in this document is one of several methods to calculate the appropriate sample size and test conditions of a given reliability project. This first edition of IEC 63287-1 cancels and replaces the first edition of IEC 60749-43 published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
the document has been renamed and renumbered to distinguish it from the IEC 60749 (all parts);
a new section concerning the concept of "family" has been added with appropriate renumbering of the existing text.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60749-20:2020(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat
SIST EN IEC 60749-20:2020

IEC 60749-20:2020 is available as IEC 60749-20:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-20:2020 provides a means of assessing the resistance to soldering heat of semiconductors packaged as plastic encapsulated surface mount devices (SMDs). This test is destructive. This edition includes the following significant technical changes with respect to the previous edition: - incorporation of a technical corrigendum to IEC 60749-20:2008 (second edition ); - inclusion of new Clause 3; - inclusion of explanatory notes.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60749-15:2020(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through-hole mounted devices
SIST EN IEC 60749-15:2020

IEC 60749-15:2020 is available as IEC 60749-15:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-15:2020 describes a test used to determine whether encapsulated solid state devices used for through-hole mounting can withstand the effects of the temperature to which they are subjected during soldering of their leads by using wave soldering. In order to establish a standard test procedure for the most reproducible methods, the solder dip method is used because of its more controllable conditions. This procedure determines whether devices are capable of withstanding the soldering temperature encountered in printed wiring board assembly operations, without degrading their electrical characteristics or internal connections. This test is destructive and may be used for qualification, lot acceptance and as a product monitor. The heat is conducted through the leads into the device package from solder heat at the reverse side of the board. This procedure does not simulate wave soldering or reflow heat exposure on the same side of the board as the package body. This edition includes the following significant technical changes with respect to the previous edition: - inclusion of new Clause 3, Terms and definitions; - clarification of the use of a soldering iron for producing the heating effect; - inclusion an option to use accelerated ageing.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60749-30:2020(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing
SIST EN IEC 60749-30:2020

IEC 60749-30:2020 is available as IEC 60749-30:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-30:2020 establishes a standard procedure for determining the preconditioning of non-hermetic surface mount devices (SMDs) prior to reliability testing. The test method defines the preconditioning flow for non-hermetic solid-state SMDs representative of a typical industry multiple solder reflow operation. These SMDs are subjected to the appropriate preconditioning sequence described in this document prior to being submitted to specific in-house reliability testing (qualification and/or reliability monitoring) in order to evaluate long term reliability (impacted by soldering stress). This edition includes the following significant technical changes with respect to the previous edition: - inclusion of new Clause 3; - expansion of 6.7 on solder reflow; - inclusion of explanatory notes and clarifications.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day