Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 1: Performance

IEC 63115-1:2020 specifies the marking, designation, tests and requirements for sealed nickel­metal hydride cells and batteries used in industrial applications, including stationary applications. When an IEC International Standard specifying test conditions and requirements for cells used in special applications is in conflict with this document, the former takes precedence (e.g. IEC 62675). The following are some examples of applications that utilize the cells and batteries falling under the scope of this document. • Stationary applications: telecom, uninterruptible power supplies (UPS), electrical energy storage system, utility switching, emergency power and similar applications. • Motive applications: fork-lift truck, golf cart, AGV (Automatic Guided Vehicle), railway, and marine, excluding road vehicles. Since this document covers batteries for various industrial applications, it includes those requirements that are common and minimum to the various applications. This document applies to cells and batteries. If the battery is divided into smaller units, the smaller unit can be tested as representative of the battery. The manufacturer clearly declares the tested unit. The manufacturer can add functions to the tested unit that are present in the final battery.

Sekundärzellen und -batterien mit alkalischen oder anderen nicht-säurehaltigen Elektrolyten - Gasdichte Nickel-Metallhydrid-Zellen und -Batterien für den Gebrauch in industriellen Anwendungen - Teil 1: Leistungsfähigkeit

Accumulateurs alcalins et autres accumulateurs à électrolyte non acide - Accumulateurs étanches au nickel-métal hydrure destinés à l'utilisation dans des applications industrielles - Partie 1: Performances

L'IEC 63115-1:2020 spécifie le marquage, la désignation, les essais et les exigences applicables aux éléments et batteries d'accumulateurs étanches au nickel-métal hydrure utilisés dans les applications industrielles, y compris les applications stationnaires. Lorsqu'une Norme internationale IEC spécifiant des conditions d'essai et des exigences pour des éléments destinés à des applications particulières est en contradiction avec le présent document, c'est la publication particulière qui prévaut (par exemple, l'IEC 62675). Quelques exemples d'applications utilisant les éléments et batteries d'accumulateurs relevant du domaine d'application du présent document sont cités ci-dessous. • Applications stationnaires: télécommunication, alimentation sans interruption (ASI), système de stockage de l'énergie électrique, commutation de services publics, alimentation de secours et applications similaires. • Applications mobiles: chariot élévateur à fourche, voiturette de golf, véhicule à guidage automatique (VGA), véhicules ferroviaires et maritimes, à l'exclusion des véhicules routiers. Le présent document inclut les exigences communes et minimales pour plusieurs applications dans la mesure où elle traite des batteries destinées aux différentes applications industrielles. Le présent document s'applique aux éléments et batteries d'accumulateurs. Si la batterie est constituée d'unités plus petites, l'une d'elles peut être considérée comme représentative de la batterie entière et être soumise à l'essai en tant que telle. Le fabricant déclare clairement l'unité soumise à l'essai. Le fabricant peut ajouter à cette unité d'autres fonctions présentes dans la batterie finale.

Sekundarni členi in baterije z alkalnimi ali drugimi nekislinskimi elektroliti - Zatesnjeni nikelj-kovinski hidridni členi in baterije za industrijsko uporabo - 1. del: Zmogljivost

General Information

Status
Published
Publication Date
26-Mar-2020
Current Stage
6060 - Document made available - Publishing
Start Date
27-Mar-2020
Completion Date
27-Mar-2020

Relations

Buy Standard

Standard
EN IEC 63115-1:2020 - BARVE
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 63115-1:2020
01-junij-2020
Sekundarni členi in baterije z alkalnimi ali drugimi nekislinskimi elektroliti -
Zatesnjeni nikelj-kovinski hidridni členi in baterije za industrijsko uporabo - 1. del:
Zmogljivost
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed
nickel-metal hydride cells and batteries for use in industrial applications - Part 1:
Performance
Sekundarni členi in baterije z alkalnimi ali drugimi nekislinskimi elektroliti - Zatesnjeni
nikelj-kovinski hidridni členi in baterije za industrijsko uporabo - 1. del: Zmogljivost
Ta slovenski standard je istoveten z: EN IEC 63115-1:2020
ICS:
29.220.30 Alkalni sekundarni členi in Alkaline secondary cells and
baterije batteries
SIST EN IEC 63115-1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 63115-1:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 63115-1:2020
EUROPEAN STANDARD EN IEC 63115-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2020
ICS 29.220.30
English Version
Secondary cells and batteries containing alkaline or other non-
acid electrolytes - Sealed nickel-metal hydride cells and batteries
for use in industrial applications - Part 1: Performance
(IEC 63115-1:2020)
Accumulateurs alcalins et autres accumulateurs à Sekundärzellen und -batterien mit alkalischen oder anderen
électrolyte non acide - Accumulateurs étanches au nickel- nichtsäurehaltigen Elektrolyten - Wiederaufladbare
métal hydrure destinés à l'utilisation dans des applications gasdichte Nickel-Metallhydrid-Zellen und -Module für den
industrielles - Partie 1: Performances Gebrauch in industriellen Anwendungen - Teil 1:
(IEC 63115-1:2020) Leistungsfähigkeit
(IEC 63115-1:2020)
This European Standard was approved by CENELEC on 2020-02-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63115-1:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 63115-1:2020
EN IEC 63115-1:2020 (E)
European foreword
The text of document 21A/716/FDIS, future edition 1 of IEC 63115-1, prepared by SC 21A "Secondary
cells and batteries containing alkaline or other non-acid electrolytes" of IEC/TC 21 "Secondary cells
and batteries" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 63115-1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-11-24
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-02-24
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 63115-1:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60051 (series) NOTE Harmonized as EN 60051/A2 (series)
IEC 61434:1996 NOTE Harmonized as EN 61434:1996 (not modified)
1
IEC 63115-2 NOTE Harmonized as EN IEC 63115-2
1
To be published. Stage at the time of publication: prEN IEC 63115-2:2019.
2

---------------------- Page: 4 ----------------------
SIST EN IEC 63115-1:2020
EN IEC 63115-1:2020 (E)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.