EN 60519-11:2007

Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals

Lays down requirements common to installations using the effect of electromagnetic forces on liquid metals; specific requirements for electromagnetic pouring equipment; specific requirements for electromagnetic equipment with lining. The significant changes with respect to the previous edition are the latest editions of IEC 60519-1:2003 and IEC 60519-3:2005 which have been taken into account. To be used in conjunction with IEC 60519-1.

Sicherheit in Elektrowärmeanlagen - Teil 11: Besondere Anforderungen an Anlagen, die die Wirkung elektromagnetischer Kräfte auf flüssige Metalle nutzen

Sécurité dans les installations électrothermiques - Partie 11: Exigences particulières pour les installations utilisant l'effet des forces électromagnétiques sur les métaux liquides

Contient les exigences particulières pour les installations utilisant l'effet des forces électromagnétiques sur les métaux liquides; les exigences particulières pour les installations pour coulée électromagnétique; les exigences particulières pour les installations avec garnissage. Doit être utilisée conjointement avec la CEI 60519-1. Les modifications significatives par rapport à l'édition antérieure sont les dernières éditions de la CEI 60519-1:2003 et de la CEI 60519-3:2005 qui ont été prises en compte.

Varnost pri električnih grelnih inštalacijah - 11. del: Posebne zahteve za inštalacije, ki uprabljajo učinke elektromagnetnih sil na tekoče kovine (IEC 60519-11:2007)

General Information

• Status: Published
• Publication Date: 20-Sep-2007
• Withdrawal Date: 31-Aug-2010
• ICS: 13.280 - Radiation protection
• ICS: 25.180.10 - Electric furnaces
• Technical Committee: CLC/SR 27 - Industrial electroheating equipment
• Drafting Committee: IEC/TC 27 - IEC_TC_27
• Parallel Committee: IEC/TC 27 - IEC_TC_27
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 21-Sep-2007
• Completion Date: 21-Sep-2007
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60519-11:2008 - Safety in electroheat installations -- Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals

Relations

• Replaces: EN 60519-11:1997 - Safety in electroheat installations - Part 11: Particular requirements for installations for electromagnetic stirring, transport or pouring of metal liquids
• Effective Date: 28-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metalsSécurité dans les installations électrothermiques - Partie 11: Exigences particulieres pour les installations utilisant l'effet des forces électromagnétiques sur les métaux liquidesSicherheit in Elektrowärmeanlagen - Teil 11: Besondere Anforderungen an Anlagen, die die Wirkung elektromagnetischer Kräfte auf flüssige Metalle nutzenTa slovenski standard je istoveten z:EN 60519-11:2007SIST EN 60519-11:2008en,fr,de25.180.10Electric furnacesICS:SIST EN 60519-11:19991DGRPHãþDSLOVENSKI
STANDARDSIST EN 60519-11:200801-januar-2008







EUROPEAN STANDARD EN 60519-11 NORME EUROPÉENNE
EUROPÄISCHE NORM September 2007
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60519-11:2007 E
ICS 25.180.10 Supersedes EN 60519-11:1997
English version
Safety in electroheat installations -
Part 11: Particular requirements for installations
using the effect of electromagnetic forces on liquid metals (IEC 60519-11:2007)
Sécurité dans les installations électrothermiques -
Partie 11: Exigences particulières
pour les installations utilisant l'effet
des forces électromagnétiques
sur les métaux liquides (CEI 60519-11:2007)
Sicherheit in Elektrowärmeanlagen -
Teil 11: Besondere Anforderungen
an Anlagen, die die Wirkung elektromagnetischer Kräfte
auf flüssige Metalle nutzen (IEC 60519-11:2007)
This European Standard was approved by CENELEC on 2007-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 60519-11:2007
- 2 -
Foreword The text of document 27/577/FDIS, future edition 2 of IEC 60519-11, prepared by IEC TC 27, Industrial electroheating equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60519-11 on 2007-09-01. This European Standard supersedes EN 60519-11:1997. The significant changes with respect to EN 60519-11:1997 are as follows: – EN 60519-1:2003 and EN 60519-3:2005 have been taken into account; – definitions have been brought into line with IEC 60050-841:2004. This standard is to be used in conjunction with EN 60519-1:2003. It is intended to specify particular requirements for installations using the effect of electromagnetic forces on liquid metals. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2008-06-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2010-09-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60519-11:2007 was approved by CENELEC as a European Standard without any modification. __________



- 3 - EN 60519-11:2007 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-841 2004 International Electrotechnical Vocabulary -
Part 841: Industrial electroheat - -
IEC 60110-1 1998 Power capacitors for induction heating installations -
Part 1: General EN 60110-1 1998
IEC 60143-1 2004 Series capacitors for power systems -
Part 1: General EN 60143-1 2004
IEC 6
...