EN 62135-1:2008

Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation

IEC 62135:2008 applies to equipment for resistance welding and allied processes and includes single and multiple welding stations which may be manually or automatically loaded and/or started. This standard covers stationary and portable equipment and specifies safety requirements for design, manufacture and installation.

Widerstandsschweißeinrichtungen - Teil 1: Sicherheitsanforderungen für die Konstruktion, Herstellung und Errichtung

Matériels de soudage par résistance - Partie 1: Exigences de sécurité pour la conception, la fabrication et l’installation

La CEI 62135:2008 s'applique aux matériels de soudage par résistance et aux procédés connexes et comprend les stations de soudage simples et multiples qui peuvent être alimentées manuellement ou automatiquement et/ou mises en route. Cette norme s'applique aux matériels fixes et portables et spécifie les exigences de sécurité pour leur conception, fabrication et installation.

Oprema za uporovno varjenje - 1. del: Varnostne zahteve za zasnovo, izdelavo in inštalacijo (IEC 62135-1:2008)

General Information

• Status: Withdrawn
• Publication Date: 12-Nov-2008
• Withdrawal Date: 30-Sep-2011
• ICS: 25.160 - Welding, brazing and soldering
• Technical Committee: CLC/TC 26 - Electric welding
• Drafting Committee: IEC/TC 26 - IEC_TC_26
• Parallel Committee: IEC/TC 26 - IEC_TC_26
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 11-Jun-2018
• Completion Date: 11-Jun-2018
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 62135-1:2009 - Resistance welding equipment -- Part 1: Safety requirements for the design, manufacture and the installation

Relations

• Replaces: EN 50063:1989 - Safety requirements for the construction and the installation of equipment for resistance welding and allied processes
• Effective Date: 29-Jan-2023
• Replaced By: EN 62135-1:2015 - Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62135-1:2009
01-januar-2009
1DGRPHãþD
SIST EN 50063:1996
Oprema za uporovno varjenje - 1. del: Varnostne zahteve za zasnovo, izdelavo in
inštalacijo (IEC 62135-1:2008)
Resistance welding equipment -- Part 1: Safety requirements for the design, manufacture
and the installation
Widerstandsschweißeinrichtungen -- Teil 1: Sicherheitsanforderungen für Entwurf,
Herstellung und Errichtung
Matériels de soudage par résistance -- Partie 1: Exigences de sécurité pour la
conception, la fabrication et l’installation
Ta slovenski standard je istoveten z: EN 62135-1:2008
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN 62135-1:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62135-1:2009

---------------------- Page: 2 ----------------------

SIST EN 62135-1:2009

EUROPEAN STANDARD
EN 62135-1

NORME EUROPÉENNE
November 2008
EUROPÄISCHE NORM

ICS 25.160 Supersedes EN 50063:1989


English version


Resistance welding equipment -
Part 1: Safety requirements for design, manufacture and installation
(IEC 62135-1:2008)


Matériels de soudage par résistance -  Widerstandsschweißeinrichtungen -
Partie 1: Exigences de sécurité Teil 1: Sicherheitsanforderungen
pour la conception, für die Konstruktion,
la fabrication et l’installation Herstellung und Errichtung
(CEI 62135-1:2008) (IEC 62135-1:2008)




This European Standard was approved by CENELEC on 2008-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62135-1:2008 E

---------------------- Page: 3 ----------------------

SIST EN 62135-1:2009
EN 62135-1:2008 – 2 –
Foreword
The text of document 26/377/FDIS, future edition 1 of IEC 62135-1, prepared by IEC TC 26, Electric
welding, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 62135-1 on 2008-10-01.
This European standard supersedes EN 50063:1989 + corrigendum August 1990.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62135-1:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60085 NOTE  Harmonized as EN 60085:2008 (not modified).
IEC 60112 NOTE  Harmonized as EN 60112:2003 (not modified).
IEC 60364 NOTE  Harmonized in HD 384 / HD 60364 series (modified).
IEC 60990 NOTE  Harmonized as EN 60990:1999 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 62135-1:2009
– 3 – EN 62135-1:2008

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 60204-1 - Safety of m
...