EN IEC 62832-1:2020
(Main)Industrial-process measurement, control and automation - Digital factory framework - Part 1: General principles
Industrial-process measurement, control and automation - Digital factory framework - Part 1: General principles
This part of IEC 62832 defines the general principles of the Digital Factory framework (DF framework), which is a set of model elements (DF reference model) and rules for modelling production systems. This DF framework defines: - a model of production system assets; - a model of relationships between different production system assets; - the flow of information about production system assets. The DF framework does not cover representation of building construction, input resources (such as raw production material, assembly parts), consumables, work pieces in process, nor end products. It applies to the three types of production processes (continuous control, batch control and discrete control) in any industrial sector (for example aeronautic industries, automotive, chemicals, wood). NOTE This document does not provide an application scenario for descriptions based on ISO 15926 (all parts), because ISO 15926 (all parts) uses a different methodology for describing production systems. The representation of a production system according to this document is managed throughout all phases of the production system life cycle (for example design, construction, operation or maintenance). The requirements and specification of software tools supporting the DF framework are out of scope of this document.
Industrielle Automatisierungs- und Leittechnik - Grundstruktur der digitalen Fabrik - Teil 1: Allgemeine Grundsätze
Mesure, commande et automation dans les processus industriels - Cadre de l’usine numérique (digital factory) - Partie 1: Principes généraux
L'IEC 62832-1:2020 définit les principes généraux du cadre de l’usine numérique (Digital Factory) (cadre DF), lequel est un ensemble d'éléments de modèles (modèle de référence DF) et de règles de modélisation des systèmes de production. Ce cadre DF définit: • un modèle d’actif du système de production; • un modèle de relations entre les différents actifs du système de production; • le flux d'informations relatives aux actifs du système de production. Le cadre DF ne couvre pas la représentation des constructions immobilières, des ressources d'entrée (les matières premières, les pièces d'assemblage, par exemple), des consommables, des pièces de fabrication ni des produits finis. Il s'applique aux trois types de processus de production (le contrôle continu, le contrôle par lots et le contrôle discret) dans tous les secteurs industriels (l'industrie aéronautique, le secteur automobile, les produits chimiques, le bois, par exemple).
Meritev, nadzor in avtomatizacija merilnega industrijskega procesa - Okvir za digitalno tovarno - 1.del: Splošna načela (IEC 62832-1:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62832-1:2021
01-februar-2021
Meritev, nadzor in avtomatizacija merilnega industrijskega procesa - Okvir za
digitalno tovarno - 1.del: Splošna načela (IEC 62832-1:2020)
Industrial-process measurement, control and automation - Digital factory framework -
Part 1: General principles (IEC 62832-1:2020)
Industrielle Leittechnik - Grundstruktur der digitalen Fabrik - Teil 1: Allgemeine
Grundsätze (IEC 62832-1:2020)
Mesure, commande et automation dans les processus industriels - Cadre de l'usine
numérique (digital factory) - Partie 1: Principes généraux (IEC 62832-1:2020)
Ta slovenski standard je istoveten z: EN IEC 62832-1:2020
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN IEC 62832-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62832-1:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 62832-1:2021
EUROPEAN STANDARD EN IEC 62832-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2020
ICS 25.040.40
English Version
Industrial-process measurement, control and automation - Digital
factory framework - Part 1: General principles
(IEC 62832-1:2020)
Mesure, commande et automation dans les processus Industrielle Leittechnik - Grundstruktur der digitalen Fabrik -
industriels - Cadre de l'usine numérique (digital factory) - Teil 1: Allgemeine Grundsätze
Partie 1: Principes généraux (IEC 62832-1:2020)
(IEC 62832-1:2020)
This European Standard was approved by CENELEC on 2020-11-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62832-1:2020 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62832-1:2021
EN IEC 62832-1:2020 (E)
European foreword
The text of document 65/836/FDIS, future edition 1 of IEC 62832-1, prepared by IEC/TC 65 "Industrial-
process measurement, control and automation" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 62832-1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-08-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-11-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62832-1:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61360 (series) NOTE Harmonized as EN 61360 (series)
IEC 61360-1 NOTE Harmonized as EN 61360-1
IEC 61360-2 NOTE Harmonized as EN 61360-2
IEC 61987 (series) NOTE Harmonized as EN IEC 61987 (series)
IEC 61987-10:2009 NOTE Harmonized as EN 61987-10:2009 (not modified)
IEC 62264 (series) NOTE Harmonized as EN 62264 (series)
IEC 62264-1:2013 NOTE Harmonized as EN 62264-1:2013 (not modified)
IEC 62264-2 NOTE Harmonized as EN 62264-2
IEC 62683 (series) NOTE Harmonized as EN 62683 (series)
ISO 11354-1:2011 NOTE Harmonized as EN ISO 11354-1:2011 (not modified)
IEC 62656 (series) NOTE Harmonized as EN IEC 62656 (series)
ISO 19439 NOTE Harmonized as EN ISO 19439
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.