Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements

2013-04-17 - Publication editing allocated to cpalagi@cencenelec.eu
2021: CLC legacy converted by DCLab NISOSTS

Elektroinstallationskanalsysteme für elektrische Installationen - Teil 1: Allgemeine Anforderungen

Systèmes de goulottes et de conduits profilés pour installations électriques - Partie 1: Règles générales

Sistemi kabelskih korit in sistemi kabelskih cevi za električne inštalacije - 1. del: Splošne zahteve

Ta evropski standard določa zahteve in preskuse za sisteme kabelskih korit (CTS) in sisteme kabelskih cevi (CDS), namenjene za namestitev in po potrebi električno zaščitno ločevanje izoliranih vodnikov, kablov in morda druge električne opreme ter inštalacij električnih in/ali komunikacijskih sistemov. Največja napetost teh inštalacij je 1000 V izmenične napetosti in 1500 V enosmerne napetosti. Ta standard se ne uporablja za sisteme kanalov, polic, lestvic, verige za prenos energije ali opremo, ki jo obravnavajo drugi standardi. Pričujoči 1. del se uporablja skupaj z ustreznim 2. delom za posebne zahteve.
OPOMBA: Pričujoči 1. del ni predviden za samostojno uporabo.

General Information

Status
Published
Publication Date
27-Jun-2013
Withdrawal Date
19-May-2016
Current Stage
6060 - Document made available - Publishing
Start Date
28-Jun-2013
Completion Date
28-Jun-2013

Relations

Buy Standard

Amendment
EN 50085-1:2006/A1:2013
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50085-1:2006/A1:2013
01-september-2013
6LVWHPLNDEHOVNLKNRULWLQVLVWHPLNDEHOVNLKFHYL]DHOHNWULþQHLQãWDODFLMHGHO
6SORãQH]DKWHYH
Cable trunking systems and cable ducting systems for electrical installations - Part 1:
General requirements
Elektroinstallationskanalsysteme für elektrische Installationen - Teil 1: Allgemeine
Anforderungen
Systèmes de goulottes et de conduits profilés pour installations électriques - Partie 1:
Règles générales
Ta slovenski standard je istoveten z: EN 50085-1:2005/A1:2013
ICS:
29.120.10 ,QãWDODFLMVNHFHYL]D Conduits for electrical
HOHNWULþQHQDPHQH purposes
SIST EN 50085-1:2006/A1:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50085-1:2006/A1:2013

---------------------- Page: 2 ----------------------

SIST EN 50085-1:2006/A1:2013

EUROPEAN STANDARD
EN 50085-1/A1

NORME EUROPÉENNE
June 2013
EUROPÄISCHE NORM

ICS 29.120.10


English version


Cable trunking systems and cable ducting systems for electrical
installations -
Part 1: General requirements



Systèmes de goulottes et de conduits Elektroinstallationskanalsysteme für
profilés pour installations électriques - elektrische Installationen -
Partie 1: Règles générales Teil 1: Allgemeine Anforderungen






This amendment A1 modifies the European Standard EN 50085-1:2005; it was approved by CENELEC on 2013-
05-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate
the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50085-1:2005/A1:2013 E

---------------------- Page: 3 ----------------------

SIST EN 50085-1:2006/A1:2013
EN 50085-1:2005/A1:2013 - 2 -


Foreword
This document (EN 50085-1:2005/A1:2013) has been prepared by CLC/TC 213 "Cable management
systems".
The following dates are fixed:
• latest date by which this document has to be
(dop) 2014-05-20
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards
(dow) 2016-05-20
conflicting with this document have to
be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for
Use within Certain Voltage Limits (LVD - 2006/95/EC).

---------------------- Page: 4 ----------------------

SIST EN 50085-1:2006/A1:2013
- 3 - EN 50085-1:2005/A1:2013

2 Normative references
Replace
EN 50102 1995 Degrees of protection provided by enclosures for electrical
+ A1 1998 equipment against external mechanical impacts (IK code)
with
EN 62262 2002 Degrees of protection provided by enclosures for electrical
equipment against external mechanical impacts (IK code)
(IEC 62262:2002)

3 Definitions
In 3.13, replace the term and definition with:
3.13
non-flame propagating system component
system component which can catch fire as a result of an applied flame, in which the resulting flame does not
propagate and self extinguishes within a limited time after the applied flame is removed
In 3.18, replace the term and definition with:
3.18
cable anchorage
system accessory or part of another system component to relieve conductors in terminals and terminations
from strain by resisting the pull and twist forces on cable
6 Classification
Replace 6.2 with:
6.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.