iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 62960:2020

(Main)

Dependability reviews during the life cycle

Dependability reviews during the life cycle

IEC 62960:2020 provides guidance on a review methodology for dependability from a technical perspective that is applicable at all stages of a system life cycle. Its application can improve the dependability of a system throughout its life cycle by triggering appropriate actions at appropriate times to address potential dependability problems. It provides guidance for developers, manufacturers, users and third-party independent reviewers such as consulting organizations. This document describes a dependability review methodology focusing on: - coherence of review activities across life cycle stages and their impact on dependability; - stakeholder identification and how this affects dependability review activities; - the relationships between different types of reviews; - procedures for effective dependability reviews; - examples of dependability review activities.

Zuverlässigkeitsbewertungen während des Lebenszyklus

Revues de la sûreté de fonctionnement au cours du cycle de vie

IEC 62960:2020 fournit, sous un angle technique, des recommandations relatives à une méthodologie de revue de la sûreté de fonctionnement applicable à toutes les phases du cycle de vie d'un système. Son application permet d'améliorer la sûreté de fonctionnement d'un système tout au long de son cycle de vie, en déclenchant au moment opportun des mesures adéquates pour traiter les éventuels problèmes de sûreté de fonctionnement. Il fournit des recommandations à l'attention des développeurs, des fabricants, des utilisateurs et des vérificateurs tiers indépendants, tels que des organismes de conseil. Le présent document décrit une méthodologie de revue de la sûreté de fonctionnement portant sur: - la cohérence des activités de revue au cours des différentes étapes du cycle de vie et leur impact sur la sûreté de fonctionnement; - l'identification des parties prenantes et leurs effets sur les activités de revue de la sûreté de fonctionnement; - les relations entre les différents types de revues; - les procédures garantissant l'efficacité des revues de la sûreté de fonctionnement; - des exemples d'activités réalisées dans le cadre de revues de la sûreté de fonctionnement.

Pregledi zanesljivosti v življenjskem ciklu (IEC 62960:2020)

General Information

Status
Published
Publication Date
07-May-2020
ICS
03.120.01 - Quality in general
Technical Committee
CLC/SR 56 - Dependability
Drafting Committee
IEC/TC 56 - IEC_TC_56
Current Stage
6060 - Document made available - Publishing
Start Date
08-May-2020
Completion Date
08-May-2020
Ref Project
SIST EN IEC 62960:2020 - Dependability reviews during the life cycle (IEC 62960:2020)

Buy Standard

EN IEC 62960:2020 - BARVEEN IEC 62960:2020 - BARVE
PreviousNext
Standard
EN IEC 62960:2020 - BARVE
English language
58 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62960:2020
01-julij-2020
Pregledi zanesljivosti v življenjskem ciklu (IEC 62960:2020)
Dependability reviews during the life cycle (IEC 62960:2020)
Zuverlässigkeitsbewertungen während des Lebenszyklus (IEC 62960:2020)
Revues de la sûreté de fonctionnement au cours du cycle de vie (IEC 62960:2020)
Ta slovenski standard je istoveten z: EN IEC 62960:2020
ICS:
13.020.60 Življenjski ciklusi izdelkov Product life-cycles
SIST EN IEC 62960:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62960:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 62960:2020


EUROPEAN STANDARD EN IEC 62960

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2020
ICS 03.120.01

English Version
Dependability reviews during the life cycle
(IEC 62960:2020)
Revues de la sûreté de fonctionnement au cours du cycle Zuverlässigkeitsbewertungen während des Lebenszyklus
de vie (IEC 62960:2020)
(IEC 62960:2020)
This European Standard was approved by CENELEC on 2020-04-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62960:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62960:2020
EN IEC 62960:2020 (E)
European foreword
The text of document 56/1874/FDIS, future edition 1 of IEC 62960, prepared by IEC/TC 56
"Dependability" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 62960:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-01-22
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-04-22
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62960:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60300-1:2014 NOTE Harmonized as EN 60300-1:2014 (not modified)
IEC 60300-3-3:2017 NOTE Harmonized as EN 60300-3-3:2017 (not modified)
IEC 62741:2015 NOTE Harmonized as EN 62741:2015 (not modified)
IEC 60812 NOTE Harmonized as EN IEC 60812
IEC 61025:2006 NOTE Harmonized as EN 61025:2007 (not modified)
IEC 62402:2019 NOTE Harmonized as EN IEC 62402:2019 (not modified)
IEC 62740:2015 NOTE Harmonized as EN 62740:2015 (not modified)
IEC 61014:2003 NOTE Harmonized as EN 61014:2003 (not modified)
IEC 61508-1:2010 NOTE Harmonized as EN 61508-1:2010 (not modified)
IEC 60706-2:2006 NOTE Harmonized as EN 60706-2:2006 (not modified)
IEC 61078:2016 NOTE Harmonized as EN 61078:2016 (not modified)
IEC 62853:2018 NOTE Harmonized as EN IEC 62853:2018 (not modified)
IEC 31010:2019 NOTE Harmonized as EN IEC 31010:2019 (not modified)
IEC 60300-3-2 NOTE Harmonized as EN 60300-3-2
IEC 60721-2 (series) NOTE Harmonized as EN 60721-2 (series)
IEC 60721-3 (series) NOTE Harmonized as EN 60721-3 (series)
ISO/IEC 27000:2018 NOTE Harmonized as EN ISO/IEC 27000:2020 (not modified)
ISO 9000:2015 NOTE Harmonized as EN ISO 9000:2015 (not modified)
2

---------------------- Page: 4 ----------------------
SIST EN IEC 62960:2020
EN IEC 62960:2020 (E)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62506:2023(Main)
Methods for product accelerated testing
SIST EN IEC 62506:2024

IEC 62506:2023 provides guidance on the application of various accelerated test techniques for measurement or improvement of item reliability. Identification of potential failure modes that can be experienced in the use of an item and their mitigation is instrumental to ensure dependability of an item. The object of the methods is to either identify potential design weakness or provide information on item reliability, or to achieve necessary reliability and availability improvement, all within a compressed or accelerated period of time. This document addresses accelerated testing of non-repairable and repairable systems. It can be used for probability ratio sequential tests, fixed duration tests and reliability improvement/growth tests, where the measure of reliability can differ from the standard probability of failure occurrence. This document also extends to present accelerated testing or production screening methods that would identify weakness introduced into the item by manufacturing error, which can compromise item reliability. Services and people are however not covered by this document.

  • Standard
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60300-3-4:2022(Main)
Dependability management - Part 3-4: Application guide - Specification of dependability requirements
SIST EN IEC 60300-3-4:2022

IEC 60300-3-4:2022 gives guidance on specifying dependability requirements and collating these requirements in a specification, together with a list of the means of assuring the achievement of the dependability requirements. The guidance provided includes: • specifying quantitative and qualitative reliability, maintainability, supportability and availability requirements; • advising acquirers on how to ensure that the requirements can be fulfilled by suppliers; • advising suppliers to help them meet the acquirer's requirements. Other obligations, such as legislation and governmental regulations, can also place requirements on items, in addition to any requirements derived in accordance with this document.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61163-2:2020(Main)
Reliability stress screening - Part 2: Components
SIST EN IEC 61163-2:2020

IEC 61163-2:2020 provides guidance on RSS techniques and procedures for electrical, electronic, and mechanical components. This document is procedural in nature and is not, and cannot be, exhaustive with respect to component technologies due to the rapid rate of developments in the component industry. This document is: a) intended for component manufacturers as a guideline; b) intended for component users as a guideline to negotiate with component manufacturers on RSS requirements; c) intended to allow the planning of an RSS process in house to meet reliability requirements or to allow the re-qualification of components for specific, upgraded, environments; d) intended as a guideline to sub-contractors who provide RSS as a service. This document is not intended to provide test plans for specific components or for delivery of certificates of conformance for batches of components. The use of bi-modal Weibull analysis to select and optimize an RSS process without having to estimate the reliability and life time of all items is described. This second edition cancels and replaces the first edition published in 1998. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) this version of the document is a complete rewrite and restructure from the previous version.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61123:2020(Main)
Reliability testing - Compliance test plans for success ratio
SIST EN IEC 61123:2020

IEC 61123:2019 is intended to define a procedure to verify if a reliability of an item/system complies with the stated requirements. The requirement is assumed to be specified as the percentage of success (success ratio) or the percentage of failures (failure ratio). This document can be used where a number of items are tested (number of trials performed) and classified as passed or failed. It can also be used where one or a number of items are tested repeatedly. The procedures are based on the assumption that the probability of success or failure is the same from trial to trial (statistically independent events). Plans for fixed trial/failure terminated tests as well as truncated sequential probability ratio tests (SPRTs) are included. This document contains extensive tables with ready-to-use SPRT plans and their characteristics for equal and non-equal risks for supplier and customer. In the case of the reliability compliance tests for constant failure rate/intensity, IEC 61124 applies. This second edition cancels and replaces the first edition published in 1991. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: The sequential probability ratio test (SPRT) [1, 2][1] has been significantly developed in recent years [3, 4, 5]. This edition contains shorter and accurate tests, a wide range of test plans, and significant additional characteristic data, as follows: the tests are significantly truncated (the maximum trial numbers are low) without substantially increasing the expected number of trials to decision (ENT); the true producer’s and consumer’s risks (α', β') are given and very close to the nominal (α, β); the range of the test parameters is wide (failure ratio, risks and discrimination ratio); the test plans include various risk ratios (not restricted to equal risks only); the values of ENT are accurate and given in the relevant region (for practical use); guidelines for extension of the test sets (interpolation and extrapolation) are included. In Annex C, the use of the cumulative binomial distribution function of Excel that simplifies the procedure of designing has been added (Clause C.3). Keywords: verify if a reliability of an item/system complies with the stated requirements

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60812:2018(Main)
Failure modes and effects analysis (FMEA and FMECA)
SIST EN IEC 60812:2018

IEC 60812:2018 explains how failure modes and effects analysis (FMEA), including the failure modes, effects and criticality analysis (FMECA) variant, is planned, performed, documented and maintained. The purpose of failure modes and effects analysis (FMEA) is to establish how items or processes might fail to perform their function so that any required treatments could be identified. An FMEA provides a systematic method for identifying modes of failure together with their effects on the item or process, both locally and globally. It may also include identifying the causes of failure modes. Failure modes can be prioritized to support decisions about treatment. Where the ranking of criticality involves at least the severity of consequences, and often other measures of importance, the analysis is known as failure modes, effects and criticality analysis (FMECA). This document is applicable to hardware, software, processes including human action, and their interfaces, in any combination. An FMEA can be used in a safety analysis, for regulatory and other purposes, but this being a generic standard, does not give specific guidance for safety applications. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition: a) the normative text is generic and covers all applications; b) examples of applications for safety, automotive, software and (service) processes have been added as informative annexes; c) tailoring the FMEA for different applications is described; d) different reporting formats are described, including a database information system; e) alternative means of calculating risk priority numbers (RPN) have been added; f) a criticality matrix based method has been added; g) the relationship to other dependability analysis methods have been described. Keywords: failure modes and effects analysis (FMEA), failure modes effects and criticality analysis (FMECA)

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62853:2018(Main)
Open systems dependability
SIST EN IEC 62853:2018

IEC 62853:2018 provides guidance in relation to a set of requirements placed upon system life cycles in order for an open system to achieve open systems dependability. This document elaborates on IEC 60300-1 by providing details of the changes needed to accommodate the characteristics of open systems. It defines process views based on ISO/IEC/IEEE 15288:2015, which identifies the set of system life cycle processes. This document is applicable to life cycles of products, systems, processes or services involving hardware, software and human aspects or any integrated combinations of these elements. For open systems, security is especially important since the systems are particularly exposed to attack. This document can be used to improve the dependability of open systems and to provide assurance that the process views specific to open systems achieve their expected outcomes. It helps an organization define the activities and tasks that need to be undertaken to achieve dependability objectives in an open system, including dependability related communication, dependability assessment and evaluation of dependability throughout system life cycles. Keywords: dependability of open systems

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62550:2017(Main)
Spare parts provisioning
SIST EN 62550:2017

IEC 62550:2017 describes requirements for spare parts provisioning as a part of supportability activities that affect dependability performance so that continuity of operation of products, equipment and systems for their intended application can be sustained. This document is intended for use by a wide range of suppliers, maintenance support organizations and users and can be applied to all items.
Keywords: necessary spare parts

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61078:2016(Main)
Reliability block diagrams
SIST EN 61078:2017

IEC 61078:2016 this International Standard describes: - the requirements to apply when reliability block diagrams (RBDs) are used in dependability analysis; - the procedures for modelling the dependability of a system with reliability block diagrams; - how to use RBDs for qualitative and quantitative analysis; - the procedures for using the RBD model to calculate availability, failure frequency and reliability measures for different types of systems with constant (or time dependent) probabilities of blocks success/failure, and for non-repaired blocks or repaired blocks; - some theoretical aspects and limitations in performing calculations for availability, failure frequency and reliability measures; - the relationships with fault tree analysis (see IEC 61025) and Markov techniques (see IEC 61165). This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - the structure of the document has been entirely reconsidered, the title modified and the content extended and improved to provide more information about availability, reliability and failure frequency calculations; - Clause 3 has been extended and clauses have been introduced to describe the electrical analogy, the "non-coherent" RBDs and the "dynamic" RBDs; - Annex B about Boolean algebra methods has been extended; - Annex C (Calculations of time dependent probabilities), Annex D (Importance factors), Annex E (RBD driven Petri net models) and Annex F (Numerical examples and curves) have been introduced. Keywords: reliability block diagram (RBD)

  • Standard
    121 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61882:2016(Main)
Hazard and operability studies (HAZOP studies) - Application guide
SIST EN 61882:2016

IEC 61882:2016 is available as IEC 61882:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61882:2016 provides a guide for HAZOP studies of systems using guide words. It gives guidance on application of the technique and on the HAZOP study procedure, including definition, preparation, examination sessions and resulting documentation and follow-up. Documentation examples, as well as a broad set of examples encompassing various applications, illustrating HAZOP studies are also provided. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - clarification of terminology as well as alignment with terms and definitions within ISO 31000:2009 and ISO Guide 73:2009; - addition of an improved case study of a procedural HAZOP. Keywords: HAZOP, risks and operability problems

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62740:2015(Main)
Root cause analysis (RCA)
SIST EN 62740:2015

IEC 62740:2015 describes the basic principles of root cause analysis (RCA) and specifies the steps that a process for RCA should include. This standard identifies a number of attributes for RCA techniques which assist with the selection of an appropriate technique. It describes each RCA technique and its relative strengths and weaknesses. RCA is used to analyse the root causes of focus events with both positive and negative outcomes, but it is most commonly used for the analysis of failures and incidents. Causes for such events can be varied in nature, including design processes and techniques, organizational characteristics, human aspects and external events. RCA can be used for investigating the causes of non-conformances in quality (and other) management systems as well as for failure analysis, for example in maintenance or equipment testing. RCA is used to analyse focus events that have occurred, therefore this standard only covers a posteriori analyses. It is recognized that some of the RCA techniques with adaptation can be used proactively in the design and development of items and for causal analysis during risk assessment; however, this standard focuses on the analysis of events which have occurred. The intent of this standard is to describe a process for performing RCA and to explain the techniques for identifying root causes. These techniques are not designed to assign responsibility or liability, which is outside the scope of this standard. Keywords: root cause analysis (RCA), RCA techniques

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day