Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment

IEC 61010-2-120:2016 specifies particular safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used, which fall under a), b), or c) below and present HAZARDS from the power driven moving parts according to one or more of the items 1) to 5) used by the equipment for a specific application. 1) An assembly, fitted with or intended to be fitted with a drive system other than directly applied human or animal effort, consisting of linked parts or components, at least one of which moves, and which are joined together for a specific application. 2) An assembly referred to in item 1), missing only the components to connect it on site or to sources of energy and motion. 3) An assembly referred to in items 1) and 2), ready to be installed and able to function as it stands only if mounted on a means of transport, or installed in a building or a structure. 4) Assemblies referred to in items 1), 2) and 3) or partly completed assemblies which, in order to achieve the same end, are arranged and controlled so that they function as an integral whole. A partly completed assembly is equipment which cannot perform a specific application by itself. A partly completed assembly is only intended to be incorporated into, or assembled with, other equipment, thereby forming equipment to which this standard applies. 5) An assembly of linked parts or components, at least one of which moves and which are joined together, intended for lifting loads and whose only power source is directly applied human effort. This publication is to be read in conjunction with IEC 61010-1:2010. It has the status of a group safety publication in accordance with IEC Guide 104

Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte – Teil 2-120: Besondere Sicherheitsanforderungen für Maschinen-Aspekte der Geräte

Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-120: Exigences de sécurité particulières pour les aspects des appareils relatifs aux machines

L'IEC 61010-2-120:2016 spécifie les exigences de sécurité particulières pour les types suivants d'appareils électriques et leurs accessoires, quelles que soient les conditions dans lesquelles ils sont destinés à être utilisés, qui relèvent de a), b) ou c) ci-dessous et qui présentent des DANGERS provenant des parties mobiles électriques selon un ou plusieurs des points 1) à 5) utilisés par les appareils pour une application spécifique. 1) Ensemble, équipé ou destiné à être équipé d'un système d'entraînement autre qu'un effort humain ou animal appliqué directement, constitué de parties ou de composants reliés, dont au moins une partie ou un composant est mobile, et qui sont assemblés pour une application spécifique. 2) Ensemble auquel il est fait référence au point 1), et qui ne comporte pas les composants qui permettent de le raccorder sur site ou aux sources d'énergie et de déplacement. 3) Ensemble auquel il est fait référence aux points 1) et 2), prêt à être installé et capable de fonctionner en l'état uniquement s'il est monté sur un moyen de transport, ou installé dans un bâtiment ou une structure. 4) Ensembles auxquels il est fait référence aux points 1), 2) et 3) ou ensembles complétés partiellement qui, afin d'atteindre le même objectif, sont disposés et contrôlés de sorte qu'ils fonctionnent comme un ensemble intégré. Un ensemble complété partiellement est un appareil qui ne peut exécuter lui-même une application spécifique. Un ensemble complété partiellement est destiné uniquement à être intégré ou assemblé avec d'autres appareils, constituant de ce fait un appareil auquel la présente norme s'applique. 5) Ensemble de parties ou de composants reliés, dont au moins une partie ou un composant est mobile, et qui sont assemblés, destinés à soulever des charges, et dont un effort humain appliqué directement constitue la seule source d'énergie. Cette publication doit être lue conjointement avec la IEC 61010-1:2010 Elle a le statut de norme horizontale conformément au IEC Guide 104

Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko uporabo - 2-120. del: Posebne varnostne zahteve za strojne vidike opreme (IEC 61010-2-120:2016)

Ta publikacija skupinske varnosti se uporablja predvsem kot standard o varnosti izdelka za izdelke, ki so omenjeni v okviru publikacije, vendar je namenjena tudi tehničnim odborom pri pripravi publikacij za izdelke, ki so podobni izdelkom, omenjenim v okviru tega standarda, skladno z načeli vodil IEC 104 in ISO/IEC 51. Ta 2. del standarda IEC 61010 določa posebne varnostne zahteve za naslednje vrste električne opreme in dodatkov (kadar so namenjeni uporabi), ki spadajo pod točko a), b) ali c) spodaj in predstavljajo NEVARNOST zaradi gnanih gibljivih delov v skladu z eno ali več točkami od 1) do 5), kadar jih oprema uporablja za določeno vrsto uporabe. 1) Sestav, opremljen ali namenjen za opremljanje s pogonskim sistemom, ki ne izkorišča neposredno človeške ali živalske sile, sestavljen iz povezanih delov ali komponent, med katerimi je vsaj eden gibljiv in ki so povezani za določeno vrsto uporabe. 2) Sestav iz točke 1), ki ne vključuje komponent za priključitev na mestu uporabe oziroma v vire energije in gibanja. 3) Sestav iz točk 1) in 2), pripravljen za namestitev in usposobljen za delovanje kot tak, le če je nameščen na prevoznem sredstvu ali v zgradbi ali konstrukciji. 4) Sestavi iz točk 1), 2) in 3) ali delno dokončani sestavi, ki so zaradi doseganja istega cilja razmeščeni in krmiljeni tako, da delujejo kot povezana celota. Delno dokončan sestav pomeni opremo, ki se sama po sebi ne more uporabljati za določen namen. Delno dokončan sestav je namenjen le vgradnji ali sestavitvi z drugo opremo, s katero tvori opremo, za katero se uporablja ta standard. 5) Sestav povezanih delov ali komponent, med katerimi je vsaj eden gibljiv in ki so združeni z namenom dviganja bremen in katerih edini vir energije je neposredna uporaba človeške sile. Če vsa oprema ali njen del sodi v okvir enega ali več drugih delov standarda IEC 61010 in v okvir tega standarda, bo morala zadostiti tudi zahtevam teh drugih delov standardov.

General Information

Status
Withdrawn
Publication Date
12-Apr-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
25-Aug-2021

Buy Standard

Standard
EN IEC 61010-2-120:2018 - BARVE
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61010-2-120:2018
01-september-2018
9DUQRVWQH]DKWHYH]DHOHNWULþQRRSUHPR]DPHULWYHQDG]RULQODERUDWRULMVNR
XSRUDERGHO3RVHEQHYDUQRVWQH]DKWHYH]DVWURMQHYLGLNHRSUHPH ,(&

Safety requirements for electrical equipment for measurement, control, and laboratory
use - Part 2-120: Particular safety requirements for machinery aspects of equipment
(IEC 61010-2-120:2016)
6LFKHUKHLWVEHVWLPPXQJHQIUHOHNWULVFKH0HVV6WHXHU5HJHOXQG/DERUJHUlWH7HLO
%HVRQGHUH6LFKHUKHLWVDQIRUGHUXQJHQIU0DVFKLQHQ$VSHNWHGHU
*HUlWH ,(&
([LJHQFHVGHVpFXULWpSRXUDSSDUHLOVpOHFWULTXHVGHPHVXUDJHGHUpJXODWLRQHWGH
ODERUDWRLUH3DUWLH([LJHQFHVGHVpFXULWpSDUWLFXOLqUHVSRXUOHVDVSHFWVGHV
DSSDUHLOVUHODWLIVDX[PDFKLQHV ,(&
Ta slovenski standard je istoveten z: EN IEC 61010-2-120:2018
ICS:
13.110 Varnost strojev Safety of machinery
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
SIST EN IEC 61010-2-120:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 61010-2-120:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 61010-2-120:2018

EUROPEAN STANDARD EN IEC 61010-2-120

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2018
ICS 19.080
English Version
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-120: Particular safety
requirements for machinery aspects of equipment
(IEC 61010-2-120:2016)
Exigences de sécurité pour appareils électriques de Sicherheitsbestimmungen für elektrische Mess-, Steuer-,
mesurage, de régulation et de laboratoire - Partie 2-120:
Regel- und Laborgeräte - Teil 2-120: Besondere
Exigences de sécurité particulières pour les aspects des Sicherheitsanforderungen für Maschinen-Aspekte der
appareils relatifs aux machines Geräte
(IEC 61010-2-120:2016) (IEC 61010-2-120:2016)
This European Standard was approved by CENELEC on 2016-11-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61010-2-120:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 61010-2-120:2018
EN IEC 61010-2-120:2018
European foreword
This document (EN IEC°61010-2-120:2018) consists of the text of IEC 61010-2-120:2016 prepared by
IEC/TC 66 "Safety of measuring, control and laboratory equipment".
The following dates are fixed:
• latest date by which this document has to be implemented (dop) 2018-10-13
at national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2021-04-13
this document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61010-2-120:2016 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
The bibliography of EN 61010-1:2010 applies except as follows:
Add
ISO 11161 NOTE Harmonized as EN ISO 11161.
ISO 13732-3:2005 NOTE Harmonized as EN ISO 1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.